LED Plastic Round Rocker Switch For Tresco Pockit T2

LED plastic round rocker switch gives you a dedicated ON/OFF control point for Tresco Pockit T2 LED lights in 120 volt installations, so the lighting run can be switched exactly where it is needed along a cabinet or fixture. The switch is designed for use with Tresco Pockit T2 LED lights at 120 volt, which ties this control directly to that fixture family for straightforward planning on new layouts or retrofits. The white finish helps the switch blend into light-colored casework or trim, keeping the control point visually quiet in many kitchen or millwork applications. As an LED lighting accessory from Tresco Lighting, this rocker switch is built as part of a coordinated system, which helps maintain consistent operation across transformers, power cables, connecting cables and switches on a Tresco installation.

Key Rocker Switch Details That Support LED Runs

• The switch is specified as an ON/OFF rocker for Tresco Pockit T2 LED lights in 120 volt systems, giving a simple binary control that suits task lighting, display lighting, and other straightforward cabinet lighting layouts without extra electronics.
• Being part of the LED Lighting Accessories class from Tresco Lighting means this round rocker switch is meant to integrate into Tresco LED installations, which streamlines selection when standardizing on one manufacturer for lights, transformers, and controls.
• The product name identifies it as a plastic round rocker design, which creates a compact control point that fits well into tight architectural spaces where a small, discrete switch profile is preferred over larger rectangular devices.
• The manufacturer part number L-RDSW-2M-120-WH-1 ties the switch directly to Tresco technical documentation and layout notes, helping project planners reference the exact component when detailing drawings or ordering replacements.
• Listing under Lighting | LED Lighting Accessories clarifies that this rocker switch is intended as a support component for LED fixtures rather than a standalone light, helping installers slot it correctly into their wiring and component schedule.

120 Volt Rocker Switch And 79 Inch Lead Layout

This Tresco Lighting rocker switch is described for 120 volt use, so it belongs on line-voltage LED Pockit T2 installations where the control point must interrupt 120 volt feed to the fixtures. The Web Description notes a 2m (79" ) lead, which provides a defined length of cord between the switch and its connection point, giving layout flexibility when positioning the control relative to the Pockit T2 LED lights. That cord length helps installers route from a convenient fingertip location on a cabinet or display surface back to a power or junction area without needing additional splices within that span. Because the switch is specified as an ON/OFF control, installers can plan the circuit as a straightforward single-pole style control point within the Tresco system layout.

Using This Tresco Rocker Switch In LED Projects

Where This Round Rocker Switch Fits Best

This LED plastic round rocker switch is identified specifically for use with Tresco Pockit T2 LED lights at 120 volt, so it fits projects that already specify that fixture family for undercabinet, display, or furniture lighting. The white finish described in the product name supports use on painted cabinets, white casework, or light trim where a dark control would stand out visually. As part of Tresco Lighting LED Lighting Accessories, the switch suits installations where the whole run is built from Tresco fixtures, transformers, power cables, connecting cables and switches to keep the system consistent. The 79 inch lead mentioned in the Web Description gives reach from a convenient user touchpoint on a cabinet face or underside back toward a power location, which helps on longer spans of Pockit T2 LED lights along a run.

Why These Rocker Switch Details Support Consistency

The ON/OFF rocker function described in the Web Description provides a simple, repeatable control action for end users, which is helpful when multiple cabinets or displays use identical Tresco Pockit T2 LED lights. The 2m (79" ) lead listed with the switch means installers can repeat a standard mounting distance from power to switch location across several openings without custom cord extensions in that segment. The 120 volt rating ties the control directly into line-voltage Pockit T2 layouts, limiting mix-ups with low-voltage components on the job. The explicit note that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches emphasizes using this rocker switch as part of a matched kit, which supports consistent electrical behavior across all the connected LED points on a project.

Common Questions About This Tresco LED Rocker Switch

Select This Rocker Switch For Pockit T2 Runs

Choose this LED plastic round rocker switch when your layout centers on Tresco Pockit T2 LED lights at 120 volt and calls for a compact white ON/OFF control with a 2m (79" ) lead. The defined lead length and round rocker format simplify planning consistent control points along cabinets, displays, or furniture using Tresco components. Ordering by manufacturer part number L-RDSW-2M-120-WH-1 through Wurth Baer Supply lets project planners match specifications directly to drawings and repeats of successful past installations.