
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
79 inch FlexTape straight starter lead from Tresco Lighting creates a straight connection between the first LED Flex br tape run and the port block, which establishes a clean starting point for a FlexTape installation. The 2M (79 inch) length gives generous reach from the LED Flex br tape to the port block, which helps when drivers or port blocks are located away from the actual lighting location. The straight starter configuration connects directly to the first LED Flex br tape segment, which sets up a straightforward wiring layout for the rest of the run. As part of Tresco Lighting connectors and connecting cables, this starter lead fits into a Tresco workflow that uses their transformers, power cables, connecting cables, and switches, which keeps the FlexTape system operating as designed.
The straight starter lead connects from the first LED Flex br tape directly to the port block, which sets a predictable cable path from the light source back to the distribution hub. With 79 inches of cable length, the installer can route from the tape position to a conveniently located port block, which supports cleaner interiors in cabinets or displays where visible wiring is undesirable. As a connecting cable within the Tresco Lighting system, this starter lead ties the FlexTape run into a port block that then feeds from Tresco transformers and power cables, which keeps the low-voltage side organized and consistent across multiple zones on the same project.
This 2M (79 inch) FlexTape straight starter lead from Tresco Lighting fits at the very beginning of an LED Flex br tape run, which places it between the first tape section and the port block feeding that circuit. In cabinet, shelving, or display layouts using Tresco LED Flex br tape, the starter lead runs back from the tape to the port block location, which might be in a nearby cabinet, closet, or service space. The 79 inch cable length allows the port block to sit away from the visible lighting area, which supports cleaner interiors and leaves room near the port block for connecting other Tresco lighting cables on the same transformer. As a connector and connecting cable, this part serves strictly as the link between tape and port block, which defines its role as the first step in the FlexTape wiring chain on each run.
The straight connection design between the first LED Flex br tape and the port block keeps the starting geometry simple, which reduces layout guesswork when repeating similar runs across a kitchen, office, or retail build. Using a dedicated Tresco Lighting starter lead that matches part number L-LED-TPEPKT-2M-1 keeps component selection aligned with Tresco fixtures, which supports system performance when combined with Tresco transformers, power cables, connecting cables, and switches. The 2M (79 inch) length is long enough to reach typical port block locations from common tape mounting points, which helps maintain consistent routing patterns from run to run in multi-cabinet installations. Because this cable is part of the connectors and connecting cables class, its defined role in the low-voltage path simplifies planning for service or expansion, which matters when future work will tie additional Tresco lighting back to existing port blocks.
The 79 inch FlexTape straight starter lead connects the first LED Flex br tape section directly to the port block, which establishes the initial low-voltage link for that lighting run.
This Tresco Lighting starter lead is used at the beginning of a FlexTape run, placed between the first tape segment and the port block in the lighting system layout.
The L-LED-TPEPKT-2M-1 FlexTape starter cable is 2M, or about 79 inches long, which provides extended reach between the tape and the port block.
A straight starter lead with LED Flex br tape creates a direct connection to the port block, which helps keep the wiring path simple at the start of the run.
This cable functions as a connector and connecting cable, linking the first LED Flex br tape to the port block as part of the Tresco Lighting low-voltage system.
This 2M FlexTape starter lead is part of the Tresco Lighting connectors and connecting cables family, which aligns with Tresco FlexTape fixtures and related components.
The 79 inch (2M) FlexTape straight starter lead from Tresco Lighting provides a defined, straight connection between the first LED Flex br tape and the port block, which suits projects that standardize on Tresco transformers, power cables, connecting cables, and switches. For cabinet, display, or millwork runs that begin with LED Flex br tape feeding into a port block, this L-LED-TPEPKT-2M-1 starter lead from Wurth Baer Supply supports an orderly, system-based approach to Tresco FlexTape layouts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSLLEDTPELNKTEE-1 Mfr# L-LED-TPELNK-TEE-1 | Tee FlexTape Link Connector, 1-1/2" | ||||
Sold in: 1 Each | RSLLEDDIMRM12V8AU1 Mfr# L-LED-DIMRMT-12V8A | T149 plastic 60W universal remote control dimmer | ||||
Sold in: 1 Each | RSLLEDTPELNK25-1 Mfr# L-LED-TPELNK-25-1 | FlexTape Linking Cord, 10" |