FlexTape Linking Cord, 2"

FlexTape Linking Cord 2 Inch For LED Tape

FlexTape Linking Cord 2 inch from Tresco Lighting connects two Flex br Tape LED tapes together, so separate LED tape runs can operate as a single continuous light line in a cabinet or display run. This Flex br Tape linking cord bridges the gap between Flex br Tape LED tapes, which helps when the lighting layout needs a break around hinges, dividers, or other cabinet obstacles. The SAP description identifies this as a 5CM (2') FlexTape link cord, so the cord length allows some routing flexibility between tape segments while staying manageable in a tight installation space. The product sits in the Connectors and Connecting Cables class, which means it is intended as a joining component rather than a light source, helping installers plan their Tresco LED tape systems with the right interconnect parts.

Key FlexTape Linking Cord Job Advantages

• The Tresco Lighting brand on this FlexTape linking cord ties directly to Tresco Flex br Tape LED tapes, giving installers a matched connection point that supports consistent system performance across a Tresco lighting layout.
• The description "Flex br Tape linking cords" defines this part as a dedicated link between tape segments, which simplifies layout planning because its role is focused on joining separate Flex br Tape LED tapes into one functional circuit.
• The classification under Lighting connectors and connecting cables confirms that this cord serves as a connective component, helping electricians and cabinet shops spec it where wiring transitions are needed rather than substituting other parts.
• The note that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches shows this cord fits into a coordinated system, which supports predictable compatibility within Tresco-branded installations.
• The SAP description "5CM (2') FLEXTAPE LINK CORD" establishes the cord length, helping installers allocate space in channels or behind cabinets so the cord can bend and route cleanly between the two LED tape sections.

Installation Role In Tresco FlexTape Systems

This FlexTape linking cord is described as connecting two Flex br Tape LED tapes together, so its primary installation role is joining tape runs within a Tresco LED system layout. Being part of the Connectors and Connecting Cables category means it is intended to sit between components rather than terminate a line, which guides how it is placed in a wiring diagram. The 5CM (2') length noted in the SAP description provides extra reach to route around cabinet structure or behind panels, which matters when aligning light locations without shifting tape positions. Because the web description notes that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches, this linking cord serves as a system-matched connection inside that genuine Tresco configuration.

Using This Tresco FlexTape Link In Projects

Where This FlexTape Linking Cord Fits Best

The web description states that this Flex br Tape linking cord connects two Flex br Tape LED tapes together, so it fits where a project uses multiple Tresco Flex br Tape LED tape segments within the same run. In a cabinet or display, separate Flex br Tape LED tapes often need to span face-frame gaps or structural breaks, and this 5CM (2') link cord from the SAP description provides enough length to cross those gaps while keeping the light lines visually aligned. As a member of the Lighting Connectors and Connecting Cables category, it is meant for the wiring zone behind or between visible surfaces, helping installers place LED tape exactly where light is needed while relying on the link cord to manage the hidden connection path.

The branding as Tresco Lighting ties this cord directly to Tresco Flex br Tape LED tapes, which is reinforced by the note that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches. That system-focused statement positions this FlexTape linking cord as part of a coordinated Tresco ecosystem, so cabinet shops and electricians can treat it as the dedicated jumper between Tresco tape segments in a planned layout. The manufacturer part number L-LED-TPELNK-5-1 gives a precise identifier for drawings and reorder lists, so repeat jobs or matching expansions can call out the same linking cord and maintain consistent connection methods across projects.

Why The 5CM FlexTape Link Supports Clean Results

The SAP description "5CM (2') FLEXTAPE LINK CORD" specifies a 5CM (2') length, which offers a balance between reach and manageability; installers can route the cord around cabinet framing or through narrow chases without excess slack crowding the wire path. Because the part is described as a Flex br Tape linking cord rather than a general cable, both cord ends are intended to interface with Flex br Tape LED tapes, which helps keep terminations consistent throughout a Tresco tape system. The classification under Connectors and Connecting Cables signals that this piece forms part of the structured wiring backbone, so it can be placed wherever two Tresco Flex br Tape LED tapes need to join without changing the tape layout itself.

The web description also notes that it is recommended to use Tresco accessories with Tresco fixtures and that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches, so using this Tresco Lighting FlexTape linking cord maintains that matched-component approach. For shops documenting their work, the manufacturer part number L-LED-TPELNK-5-1 and the product name FlexTape Linking Cord, 2" clearly define the component, which helps standardize bill-of-materials entries and simplifies training installers on which link cord to apply between Tresco Flex br Tape LED tapes.

Common FlexTape Linking Cord Installation Questions

Select This FlexTape Cord For Tresco Tape Runs

The FlexTape Linking Cord, 2" from Tresco Lighting is identified as a Flex br Tape linking cord that connects two Flex br Tape LED tapes together, so it is suited to Tresco LED tape projects needing joined segments. The SAP description calling it a 5CM (2') FLEXTAPE LINK CORD defines its working length, helping design teams plan routing between cabinet sections or display zones. With a clear manufacturer part number, L-LED-TPELNK-5-1, this connector can be specified confidently on drawings, so Tresco Flex br Tape LED tape runs gain the dedicated linking cord they require.