Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pockit T333 plastic link cord is a 10 inch white connecting cable that links two Pockit T2 LEDs together, so you can place separate fixtures and still treat them as a single run in your layout. This Pockit T2 link cord is part of Tresco Lighting connectors and connecting cables, so it ties directly into their low-voltage system and keeps the run organized across cabinets or work areas. The SAP description references 25CM and 120-L/M series, which identifies this cord as a short jumper for that Tresco series rather than a long power feed, keeping excess cable out of the installation zone. The white finish on this link cord blends with light-colored cabinet interiors, which helps projects look clean while still exposing the cord path for service or future changes.
The 10 inch white link cord is intended to link two Pockit T2 LEDs together, so installers can route power from one fixture to the next without adding extra distribution points. Because the SAP description specifies 25CM, the run distance is short enough to sit neatly between nearby fixtures, which helps keep the wiring path tight to cabinet walls or rails. Being part of Tresco Lighting connectors and connecting cables, this link cord drops into the same system layout that uses Tresco transformers, power cables, connecting cables, and switches, so the connections stay within one coordinated product family. The white color of the cord keeps the connection visually light around Pockit T2 installations, supporting clean project finishes in kitchen, office, or casework interiors.
The Pockit T2 link cord is specified to link two Pockit T2 LEDs together, so it fits best whenever two fixtures in that line need to be joined in the same low-voltage chain. The SAP description highlights 25CM and 10 inch length, which places this cord between fixtures that are close but not directly adjacent, such as under-cabinet segments or shelf lights on the same run. As a white link cord categorized under lighting connectors and connecting cables, it belongs inside the concealed wiring path that ties Tresco Lighting components together, keeping the connection dedicated to that LED system. Because the web description states that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches, this cord serves as one of the matching connecting cables in that ecosystem, supporting consistent electrical and physical connections along the run.
The product name identifies this as Pockit T333 plastic link cord, which gives installers a precise reference point when matching it to Pockit T2 LEDs during planning or rework on an existing layout. The manufacturer part number L-FPOC-LINKA-25-WH-1 provides an exact catalog identifier, reducing ordering errors when multiple Tresco connecting cables are present on a job. Being labeled as white in both the product name and SAP description keeps the finish consistent wherever white cords are already used with Tresco fixtures, which matters when several cords are visible in open casework. The web description notes that it is recommended to use Tresco accessories with Tresco fixtures and that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches, so this link cord aligns with that design intent and supports a unified Tresco Lighting installation.
The Pockit T2 link cord links two Pockit T2 LEDs together, so power and control can pass from one fixture to the next in the same Tresco Lighting run.
The Pockit T333 plastic link cord is described as 25CM and 10 inch, giving a short jumper length for connecting nearby Pockit T2 LED fixtures in cabinets or casework.
This link cord is identified as a Pockit T2 link cord and is stated to link two Pockit T2 LEDs together, so it is intended for use with Pockit T2 fixtures.
The link cord is described as white, so it visually blends with light-colored cabinet interiors while still allowing the wiring path around Pockit T2 LEDs to remain readable.
This product is categorized as a lighting connector and connecting cable, so it functions as a dedicated jumper within the Tresco Lighting low-voltage system between fixtures.
The web description states Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches, so this cord follows that matched-system approach.
The Pockit T333 plastic link cord, identified as a 10 inch white Pockit T2 link cord, gives a defined way to link two Pockit T2 LEDs together in a Tresco Lighting layout. Its role as a lighting connector and connecting cable, plus the 25CM reference, keeps the run compact between nearby fixtures. With the manufacturer part number L-FPOC-LINKA-25-WH-1 and the clear Pockit T2 designation, this cord fits workflows where installers want matching components across Tresco transformers, power cables, connecting cables, and switches.
Sold In: 1 Each