SimpLED 2" (5 cm) 12VDC Stick Linking Cord

SimpLED 2 Inch 12VDC Linking Cord Purpose

SimpLED 2 inch 12VDC stick linking cord is a compact cable from Tresco Lighting that connects SimpLED lights together back to back, so runs of stick fixtures can be laid out as a continuous line of light along a cabinet or display. The 5 cm overall length keeps the spacing between connected SimpLED fixtures tight, which helps maintain an even appearance when multiple lights are installed in sequence. This linking cord operates on 12VDC, matching the low-voltage power used by SimpLED fixtures, so the connection maintains the intended electrical setup from the transformer through each linked light. The part is classified as a connector and connecting cable, which means it is designed to sit between fixtures and complete the low-voltage circuit. The named SimpLED identity signals its role specifically in SimpLED stick lighting layouts where direct, back to back connections are preferred.

Key Linking Cord Details For Cabinet Runs

• The 2 inch (5 cm) length links SimpLED lights together back to back, keeping fixtures close so lighting gaps along a cabinet or shelf run are minimized.
• The cord is specified as 12VDC, matching the operating voltage of SimpLED fixtures so the linked section stays within the intended low-voltage system from transformer to light.
• The product is in the Tresco Lighting connectors and connecting cables class, indicating it is built as a dedicated interconnect between fixtures in a lighting run.
• The part number L-LED-SMPLNK-5-1 provides an exact reference when matching or adding cords in an existing SimpLED installation that already uses this identifier.
• The web description notes use with SimpLED lights, helping installers select it when planning continuous stick lighting layouts that rely on back to back connections.

Installation Role In SimpLED 12VDC Layouts

This SimpLED 2 inch 12VDC stick linking cord sits between two SimpLED lights and links them together back to back, so installation involves routing this short connector directly from one fixture to the next. Because the cord matches the 12VDC rating referenced for the SimpLED system, it carries power from the Tresco transformer and connecting cables through each linked stick light without changing voltage. The 5 cm length supports tight fixture spacing, which can simplify layout decisions when running lights along upper cabinets, shelves, or similar surfaces where longer gaps between fixtures are not desired. Being part of the Tresco Lighting connectors and connecting cables category, it is intended to integrate into the broader Tresco low-voltage wiring path that feeds SimpLED stick fixtures.

Using This Cord In SimpLED Lighting Runs

Where The SimpLED Linking Cord Fits Best

The SimpLED 2 inch 12VDC stick linking cord is used wherever two SimpLED lights need to be connected back to back, such as along continuous cabinet faces or inside casework where an uninterrupted line of light is important. The compact 5 cm dimension keeps the fixtures drawn closely together, so the light pattern from one stick transitions directly into the next without a long dark gap between housings. As a Tresco Lighting part in the connectors and connecting cables class, it fits into SimpLED layouts that also rely on Tresco transformers, power cables, connecting cables and switches, forming a consistent brand-specific wiring chain. In practice, this cord becomes part of the low-profile zone behind or above the work area where fixtures and wiring are routed in a straight sequence.

Why The SimpLED Cord Supports Consistent Results

The fact that this cord is identified as a SimpLED 12VDC linking component means its electrical characteristics are aligned with the SimpLED system, helping the run behave as a single, matched low-voltage line from transformer through each connected stick. Using a 2 inch, 5 cm section between lights keeps the physical alignment predictable, so installers can repeat fixture spacing from project to project using the same part number L-LED-SMPLNK-5-1. The description stating it is used to link SimpLED lights together back to back clarifies its role in joining fixtures without intermediate gaps, which supports clean visual results in finished cabinetry or display work. Because the note highlights Tresco transformers, power cables, connecting cables and switches, the cord participates in a coordinated group of components designed around the same SimpLED operating approach.

Common Questions About This SimpLED Linking Cord

Selecting This SimpLED Cord For Your Layout

The SimpLED 2 inch 12VDC stick linking cord gives a defined way to join SimpLED lights together back to back, using a 5 cm connector sized for tight fixture spacing. With its role as a Tresco Lighting connector and the specific part number L-LED-SMPLNK-5-1, it aligns with SimpLED fixtures that operate only with genuine Tresco transformers, power cables, connecting cables and switches. For projects that rely on consecutive SimpLED sticks to create a consistent lighting run, this dedicated linking cord provides the short 12VDC connection segment that keeps each light in the sequence properly tied into the SimpLED system.