Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Grass Tiomos hinge is built for inset doors on cabinets whose front face angles outward at 30 degrees, with integrated soft-close and a finish suited to both face-frame and frameless construction.
A standard concealed hinge is engineered for a cabinet face at 90 degrees. When the cabinet front angles outward, a standard arm binds or misaligns the door at close. This hinge carries the geometry for a 30-degree positive cabinet angle, meaning the arm and cup are offset to deliver a correct swing and a clean close on an angled or bay-style face. The inset crank positions the door inside the opening rather than over it, so the reveal sits flush all the way around. The 35mm cup bores into the door at a 12.6mm depth, and the arm connects to a Grass base plate mounted to the cabinet, sold separately. Use Grass plates matched to this series; plates from other brands will not engage the Tiomos arm.
The hinge body is steel with a nickel finish. On an inset door, the hardware sits close to the opening edge and is more visible than on an overlay door, so the nickel finish carries weight as a detail choice as well as a durability one. The soft-close damper is built into the hinge, requiring no separate add-on. Three-way adjustment of plus or minus 2 to 3mm in each axis keeps inset reveals consistent across a run of angled doors as the cabinets settle. Maximum door thickness for this hinge is 24mm, accommodating slightly thicker inset doors than standard concealed hinges typically allow.
This is a specialty hinge for a specific condition: inset doors on cabinets built at a 30-degree outward angle. It suits cabinet shops, custom builders, and millwork contractors designing angled kitchen sections, diagonal corner units, or bay-front cabinetry where inset doors are part of the look. It works on both face-frame and frameless construction. For a standard 90-degree cabinet with inset doors, a non-angled Tiomos inset hinge is the correct choice. For angled cabinets where a full overlay or partial overlay door is planned instead, an angled hinge with overlay geometry is needed.
The cabinet angle describes the angle of the cabinet face relative to the wall or adjacent cabinet, not the door's opening swing. A 30-degree positive angle means the front face is angled outward, as on a bay section or diagonal corner unit. If your cabinet sits at a standard 90-degree position, use a non-angled hinge instead.
No. The arm connects to a Grass base plate that mounts to the cabinet side or face-frame stile, and that plate is sold separately. Match a Grass Tiomos plate to your cabinet type and desired door position. Plates from other hinge brands will not connect to this hinge.
Dowel mount means the cup carries pre-attached dowels that press into matching holes bored into the door, rather than using cup screws. Your door needs the correct dowel holes bored at the right position. This style is common in CNC and production shop environments where dowel boring is part of the workflow.
No. Soft-close is integrated directly into this hinge. No separate damper or adapter is needed.
When the design calls for flush inset doors on an angled cabinet face, with a quiet close and a finish that holds up in the opening, this Grass Tiomos hinge covers the geometry, the motion, and the detail.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF072135500247 Mfr# F072135500247 | Tiomos Hinge Arm Cover Cap All Crankings, Nickel-Plated | ||||
Sold in: 1 Each |  GFF072135503228 Mfr# F072135503228 | Tiomos Hinge Cup Cover Cap, Nickel-Plated | ||||
Sold in: 500 Each |  GF81001 Mfr# 81001-43 | Wood Screws FHP, Nickel-Plated #6 Gauge 5/8" Length, Nickel-Plated - 500 Box Qty |
