Tiomos Face Frame Mounting Plate For Precise Alignment

Tiomos face frame mounting plate defines this part as a hinge mounting plate designed for Tiomos hinges on face frame constructions, so installers can match it correctly to that hinge family on cabinet jobs. The product is classified as a hinge mounting plate in the hinges and hinge base plates category, which positions it as the connection point between the hinge arm and the cabinet face frame during assembly. The specified 1.5mm reference ties to the plate build, giving installers a known plate height reference when laying out reveals and overlay relationships. Steel construction grounds the plate in a hard base material, giving the hinge arm a solid bearing surface at the frame. The nickel-plated finish on that steel provides a clean metallic look in the hinge area, which matters when interiors are visible and hardware appearance needs to be consistent across a run of doors.

Key Mounting Plate Details That Help On Site

• The plate is designed for wood screws, so it is intended to fasten directly into wood face frames, giving the installer a straightforward fastening method that suits typical cabinet materials.
• Its 2 point fixing layout sets two screw locations, which helps stabilize the plate against the face frame and supports repeatable hinge positioning along a cabinet run.
• The screw-on description confirms this plate is attached by driving screws through the plate into the frame, which allows the installer to work with standard drilling tools in common shop or jobsite workflows.
• Height adjustment via elongated screw holes allows the plate position to shift along the length of those slots, so the door can be brought into better vertical alignment without changing the frame drilling pattern.
• The nickel-plated steel combination means a steel base under a nickel surface, which supports hinge function while presenting a bright metal finish in the cabinet interior.

Mounting Plate Fixing And Adjustment In Practice

This Tiomos face frame mounting plate is designed as a screw-on solution for wood screws, so the installer sets it in place on the face frame and drives screws directly through the plate. That screw-driven connection ties the plate firmly into the wood substrate, which helps resist movement when the hinge arm is loaded by an opening or closing door. The 2 point fixing arrangement concentrates on two screw positions, giving a clear layout for drilling and fastening. Those fixing points work together with the elongated screw holes that provide height adjustment, so once the plate is loosely fixed, it can be shifted along the slots to refine the door height before final tightening. Because the same elongated holes carry both the fixing function and the height adjustment, any later door tuning can be done by slightly loosening those screws and moving the plate.

Using This Hinge Mounting Plate In Real Projects

Where This Tiomos Hinge Plate Fits Best

This Grass America hinge mounting plate is specified for face frame use, so it fits cabinet constructions where the door hinge mounts to a front frame rather than directly to a panel. The 1.5mm designation gives a defined plate reference that installers can use when planning overlay and gap relationships in face frame cabinetry. Because it is a Tiomos face frame mounting plate, it is meant to work within Tiomos hinge systems, positioning the hinge arm at the correct stand-off from the frame during layout. The design for wood screws means it is suited to wood face frames typically used in residential and commercial cabinetry, aligning with standard frame materials on many shop-built or production cabinets.

Details That Support Consistent Alignment And Rework

The height adjustment via elongated screw holes is central to how this plate supports alignment. Those elongated holes let the plate travel relative to the screws, translating directly into vertical door movement at the frame. That motion gives the installer a way to fine-tune door reveals along a stack of cabinets, correcting small layout variations without re-drilling. With 2 point fixing, both screws engage the face frame while still allowing slide within the slots, which helps keep the plate square as adjustments are made. Once the correct height is found, tightening the wood screws locks the plate against the frame, holding door position during repeated openings. The steel, nickel-plated construction means those slotted regions and bearing surfaces remain metal-on-metal between plate and screw heads, which supports long-term adjustability when doors need later tuning as projects settle or are modified.

Common Tiomos Face Frame Mounting Plate Questions

Selecting This Mounting Plate For Your Hinge Run

The Grass America Tiomos face frame mounting plate for wood screws, with its 1.5mm designation, gives installers a defined mounting height and a screw-on fixing method suited to wood face frames. The steel, nickel-plated construction supports hinge function while presenting a consistent interior finish across cabinets. Height adjustment through elongated screw holes, combined with 2 point fixing, provides a practical way to tune door alignment along a run without changing drilling. For projects built around Tiomos hinge systems on face frame cabinets, this hinge mounting plate supplies the plate reference, adjustment range, and fastening style that support efficient installation.