Rev-A-Shelf TWCSC 18" White Bottom Mount Waste Pullout with 2-50 Quart White Bins Soft-Close, TWCSC-2150DM-2

Choose a Rev-A-Shelf waste pull-out

Rev-A-Shelf waste pull-out is a bottom mount trash pullout built for cabinet waste storage with a pre-assembled drawer system and two white 50 quart bins. This kitchen trash pull out is made by Rev-A-Shelf Corporation and uses Blum TANDEM smooth running action with soft-close operation. Buyers looking for a double trash pull out can use this unit to organize everyday kitchen waste inside an 18 inch cabinet opening. The assembly includes the waste container setup, three-dimensional drawer front adjustment, and a Blum TANDEMBOX heavy duty full extension drawer system. A soft close waste pullout like this helps keep access easy while keeping bins contained inside the cabinet.

See how this trash pullout helps

• Two 50 quart white bins - Gives the buyer a double-bin layout for sorting household waste inside one cabinet opening.
• Bottom mount trash pullout design - Mounts at the cabinet bottom for a stable waste basket pull out setup.
• Blum TANDEM smooth running action - Helps the Rev-A-Shelf trash pull out open with controlled, consistent movement.
• Soft-close operation - Reduces hard closing and supports quieter day-to-day use in the kitchen.
• Blum TANDEMBOX heavy duty full extension drawer system - Brings the bins forward for better reach and easier waste removal.
• Three-dimensional drawer front adjustment - Helps installers fine-tune drawer front alignment during cabinet fit-up.
• Pre-assembled construction - Saves setup time compared with waste pullout kits that require more on-site assembly.
• Fits 18 inch cabinet openings - Matches the intended cabinet size for this specific Rev-A-Shelf waste pull-out model.
• White polymer cans included - Provides ready-to-use bins from the same product package.

Confirm cabinet fit and included bins

Key specs to confirm: This 50 quart waste pullout is described as an 18 inch white bottom mount waste pullout with two 50 quart white bins. Product data also states the TWCSC series fits 12 inch, 15 inch, and 18 inch cabinet openings, so for this specific model buyers should confirm the exact cabinet opening, interior clearances, and drawer front requirements before ordering. Because this is a bottom mount trash pullout with Blum TANDEMBOX hardware, confirm that the cabinet floor, side clearances, and front attachment method match your installation plan. Load rating, compliance details, and any optional power-related SERVO-DRIVE requirements are not fully stated here and should be confirmed with manufacturer technical documentation.

What's included: A complete waste container pullout, two 50 quart white polymer cans, pre-assembled Blum TANDEMBOX heavy duty full extension drawer system, soft-close operation, and three-dimensional drawer front adjustment are verified as included or part of the unit description.

What to verify before ordering: Confirm your cabinet opening is the correct size for this model, check inside cabinet depth and width, verify the bottom can accept a bottom-mounted unit, and confirm your drawer front attachment details. If you need touch-to-open operation, verify whether that option is included or requires a different configuration.

Compare this kitchen trash pull out

Use this double trash pull out daily

A double trash pull out is often chosen when a kitchen needs hidden waste storage without giving up quick access. In a busy home kitchen, two 50 quart bins can help separate trash from recycling or keep general waste and compost liners apart, depending on how the buyer sets up the cabinet. Because this Rev-A-Shelf waste pull-out is a bottom mount trash pullout, it is intended for cabinet installation where the unit can sit on the cabinet floor rather than relying on a side-mount frame alone.

For installers, the pre-assembled build can reduce setup time on site. The verified three-dimensional drawer front adjustment is useful when the cabinet front needs careful alignment after installation. That matters in remodel work where openings may not be perfectly uniform. The Blum TANDEM smooth running action and soft-close operation also support daily use in kitchens where the waste basket pull out may be opened many times per day.

Buyers searching for a Blum TANDEM waste pullout or a soft close waste pullout are usually trying to avoid rough slide action and hard closing. This model directly addresses that need with verified Blum hardware and soft-close function. The full extension drawer system is also important because it helps bring both bins out where liners can be changed and contents can be removed with less reaching inside the cabinet.

This product is best suited to buyers who already know they need an 18 inch cabinet opening waste unit and want a complete package with bins included. If your project has unusual cabinet construction, face frame limitations, or special front attachment details, those points should be checked before purchase because the product data does not provide every installation dimension.

Compare soft close waste pullout details

When buyers compare one kitchen trash pull out to another, the most useful differences are usually the mounting style, included bins, motion hardware, and how much assembly is required. This Rev-A-Shelf trash pull out is clearly positioned as a bottom-mounted, pre-assembled unit with two 50 quart bins and a Blum TANDEMBOX heavy duty full extension drawer system. Those are concrete details that help narrow fit and installation expectations.

Another common comparison point is access. A full extension waste pullout generally helps users reach the bins more directly than partial-extension designs. Here, the verified full extension drawer system supports easier liner changes and waste removal. Soft-close operation is another practical point because it helps reduce abrupt closing during repeated use.

Brand consistency also matters for buyers who want a known cabinet accessory manufacturer. Rev-A-Shelf Corporation is the verified brand for this waste pullout, and the product description identifies the hardware platform and included bin size clearly. Rather than focusing on broad claims, buyers should compare this unit by matching the cabinet opening, confirming the two-bin 50 quart format, and checking whether optional touch-to-open capability is needed for the project. If touch-to-open is a requirement, verify whether this exact model includes it or if another configuration is needed.

Check common waste pullout fit questions

Order the right bottom mount trash pullout

bottom mount trash pullout buyers should focus on cabinet fit, included bin size, and the verified hardware package before purchase. This Rev-A-Shelf unit includes two 50 quart white bins, soft-close operation, Blum TANDEM smooth running action, full extension hardware, and drawer front adjustment. Before ordering, confirm your cabinet opening, interior clearances, and front attachment details so the pullout matches your installation plan. If touch-to-open operation matters for your project, verify that feature on the exact model being purchased.