Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grant 150E sliding bypass door hardware is a medium duty commercial and residential grade sliding door hardware series rated for 150 lb capacity per door, so it handles typical room dividers, closets, and storage doors within its designed load range. This 72 inch set is built as sliding door hardware for bypassing installations, which lets one door pass in front of another where swing clearance is limited. The 150E Series is specified for applications such as doors between rooms, closet doors, cabinets, storage walls, and partitions, giving a single hardware family that can be used across multiple interior openings. As sliding door hardware, it is part of the Hettich America Corporation Grant 150E Series, so it aligns with that system's tracks and carriers when designing consistent runs.
The 72 inch Grant 150E sliding bypass door hardware uses a pre-drilled aluminum box track, which provides consistent hole spacing along the length to speed layout when fastening to the supporting structure. The box track design hides the hardware once doors are in place, so visible lines at the opening are cleaner while carriers run inside the profile. A spring loaded quick release mechanism on the hardware allows easy door installation and adjustment, so doors can be engaged, removed, or fine-tuned at the hanger point without reworking the track. The system offers 2 inch (11.1 mm) vertical adjustment, giving room to align reveals and clearances at the head and sill as conditions change along the opening. Minimal headroom required means the track and carrier assembly is designed to work in tighter overhead spaces where vertical build-up above the door is limited.
The 150E Series is defined as a medium duty commercial and residential grade sliding door hardware series for by-passing installations, so it is aimed at interior openings where a sliding bypass layout is preferred. Applications include doors between rooms, where the hardware supports room dividers that slide rather than swing into circulation zones. The same Grant 150E sliding bypass door hardware is also specified for closet doors, providing a track and carrier approach that keeps leafs overlapping within a shallow depth. Cabinets can use this series where sliding faces are needed, and storage walls and partitions are also part of the stated applications, allowing longer runs of panels to move within the weight rating. This flexibility in stated use means a single 150E system can be specified across several interior conditions while staying inside the described application envelope.
Precision ball bearing wheels guarantee smooth, quiet, and long lasting performance, so doors travel with consistent rolling action even when used repeatedly in commercial or residential settings. The pre-drilled aluminum box track hides the hardware, which simplifies overhead layout while keeping carriers and fasteners out of sight once doors are hung. A spring loaded quick release mechanism allows easy door installation and adjustment at the hanger, so doors can be clipped on, removed, or shifted without disturbing the track run. The 2 inch (11.1 mm) vertical adjustment window allows the installer to raise or lower the door relative to the opening, which helps align gaps along the floor and jambs despite minor framing variations. Minimal headroom required means this Grant 150E Series sliding door hardware can be used where clearance above the door leaf is tight yet a bypass track solution is still needed for the opening.
The Grant 150E Series sliding door hardware is rated for 150 lb capacity, so door designs can be planned within that stated load when using this 72 inch bypass set.
The 150E Series is used for doors between rooms, closet doors, cabinets, storage walls, and partitions, so it suits a range of interior sliding bypass openings.
The Grant 150E sliding bypass door hardware uses a spring loaded quick release mechanism that allows easy door installation and adjustment directly at the hanger connection.
The 150E Series sliding door hardware provides 2 inch (11.1 mm) vertical adjustment, allowing fine tuning of door height relative to the opening and floor.
This Grant 150E 72 inch set uses a pre-drilled aluminum box track that hides the hardware, giving a concealed carrier run with preset mounting holes.
The Grant 150E Series sliding door hardware is described as requiring minimal headroom, which supports use in openings with limited space above the door leaf.
This 72 inch Grant 150E sliding bypass door hardware and track set from Hettich America Corporation combines a medium duty 150 lb capacity rating with pre-drilled aluminum box track and precision ball bearing wheels to support smooth, quiet door travel. The 150E Series layout for by-passing installations is identified for doors between rooms, closets, cabinets, storage walls, and partitions, so it can be applied wherever those stated uses match the opening. With a spring loaded quick release mechanism and 2 inch (11.1 mm) vertical adjustment, the hardware provides on-hanger control over door position within the opening. For projects calling for Grant 150E Series sliding bypass door hardware in a 72 inch run, this set aligns the track profile, carrier design, and adjustment features into one coordinated medium duty solution.
Sold In: 1 Set