Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 5 inch sanding disc is a 120 grit hook and loop abrasive designed specifically for wood sanding, so it targets fiber removal instead of loading up. The Rubin 2 design quickly sheds wood fibers, which keeps the abrasive open and cutting instead of glazing over. That shedding action supports a 30 percent faster removal rate on wood, turning each pass into more efficient stock removal. The same design also delivers 30 percent longer life out of every sheet, so discs stay productive over more surfaces before changeout. The 5 inch diameter works with 9 hole backing pad patterns, giving consistent dust extraction where systems match the layout. Aluminum oxide on a paper backing provides a sharp, predictable cut on wood surfaces, helping flatten and refine rather than burnish. The synthetic resin bond holds the grain securely, supporting steady performance across the usable life of the disc.
This 5 inch 9 hole disc layout is designed for hook and loop sanding pads with a matching 9 hole pattern, so the abrasive surface stays aligned over the backing pad while dust moves through the holes. The hook and loop backing allows discs to be pressed onto the pad and pulled off again, which streamlines grit changes during rapid progression from 80 to 220. The 120 grit cut sits in the middle of that progression, refining coarse scratches while still removing material efficiently. Because the disc is closed coated aluminum oxide on paper, it lays down a dense field of cutting points, which helps create even scratch patterns that are easier to hide under finishes. The synthetic resin bond keeps the abrasive grain anchored as the disc sheds wood fibers, so the working face stays intact across typical cabinet and woodworking sanding runs.
This Rubin 2 120 grit disc is designed for use on hardwoods like oak or maple, so it suits door frames, face frames, and solid fronts in those species. The same abrasive is specified for soft woods like pine or fir, which keeps it relevant on carcasses, drawer parts, and trim made from those materials. It is also designated for tropical woods like ebony or teak, so it can be used when working high-density decorative components. In addition, the disc is specified for wood-based products, which covers common sheet goods such as panels used in cabinet and furniture construction. With a 5 inch format and 9 hole pattern, it fits sanding steps where a 5 inch random orbit sander with matching holes is in use on these materials. Across these wood types, the Rubin 2 construction is focused on shaving away fibers so abrasive points stay active instead of being filled with dust.
The Rubin 2 design that quickly sheds wood fibers keeps the disc from clogging, which helps maintain a predictable cut across the life of the sheet. That predictable cut matters when targeting uniform scratch depth before moving to finer grits. The 30 percent faster removal rate means fewer passes are needed to reach sanding depth at 120 grit, which can shorten time spent between 80 and 220 stages. A 30 percent longer life out of every sheet, as described for Rubin 2, means discs maintain useful cutting performance over more workpieces, which can stabilize surface quality across a full run of parts. The closed coated aluminum oxide structure places grain densely over the paper backing, which supports an even scratch pattern on hardwoods, softwoods, tropical woods, and wood-based products. The synthetic resin bond links the aluminum oxide grains to the backing, which supports durability while the hook and loop interface holds the disc flat against the pad.
The Rubin 2 120 grit disc is designed for hardwoods like oak and maple, soft woods like pine or fir, tropical woods like ebony or teak, and wood-based products, so it covers typical cabinet and furniture materials.
The Rubin 2 design sheds wood fibers and stays sharp, supporting a 30 percent faster removal rate, so each sanding pass at 120 grit removes stock more efficiently on wood surfaces.
This Festool Rubin 2 disc provides 30 percent longer life out of every sheet, so the abrasive remains effective across more parts or panels before disc change is needed in a sanding sequence.
The disc is 5 inches in diameter with a 9 hole pattern, so it is suited for 5 inch 9 hole hook and loop sanding pads where dust extraction aligns with those openings.
This Rubin 2 disc uses aluminum oxide abrasive on a paper backing with a synthetic resin bond and a closed coated pattern, providing dense cutting points on wood surfaces.
The 120 grit Rubin 2 disc is designed for rapid grit progression from 80 to 220, so it serves as a mid-step that refines coarse scratches while still removing stock efficiently.
The Festool Rubin 2 5 inch 120 grit hook and loop disc is purpose-built for wood, from hardwoods and softwoods to tropical woods and wood-based products, so one abrasive type can support varied shop tasks. Its design to shed wood fibers reduces clogging, which supports a 30 percent faster removal rate during mid-grit sanding. The same construction delivers 30 percent longer life out of every sheet, helping each disc cover more surfaces before changeout. With a 5 inch 9 hole pattern, aluminum oxide grain on paper, synthetic resin bond, and closed coated design, this disc supports consistent, predictable sanding results where a matching 5 inch sander is in service.
Sold In: 1 Box