Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 150 grit sanding disc is a 5 inch round abrasive disc with a hook and loop backing and a 9-hole pattern, so it mounts quickly to compatible sanders and aligns with dust extraction for a cleaner sanding area. The disc uses aluminum oxide on a paper backing, which provides a consistent cutting surface that helps produce an even scratch pattern on wood. Rubin 2 is designed to quickly shed wood fibers, which prevents clogging and keeps the abrasive cutting freely during long sanding passes. That shedding action leads to a 30% faster removal rate, so each disc removes material efficiently and keeps your sanding sequence moving. Rubin 2 also delivers 30% longer life out of every sheet, allowing more work per disc and fewer changeovers during a typical woodworking job.
Rubin 2 is designed for rapid grit progression from 80 to 220, so moving through the sanding sequence can be done with fewer passes at each step. By reaching the target grit faster, this disc helps streamline surface preparation before finishing. Rubin 2 quickly sheds wood fibers, which keeps the abrasive open and reduces loading, helping maintain cutting speed as you move across broad panels or multiple parts. The 150 grit position in the sequence refines scratches from coarser grits while still leveling minor defects, producing a surface that transitions well to finer grits or directly to finishing systems that call for that scratch level.
Rubin 2 is intended for use on hardwoods like oak or maple, so it suits cabinet doors, face frames, and furniture components built from dense stock. The disc is also specified for soft woods like pine or fir, allowing the same abrasive type to be used across trim, carcasses, and general construction-grade assemblies. Rubin 2 works on tropical woods such as ebony or teak, so shops handling specialty or high-end projects can stay with the same abrasive system across varied species. The disc is also suitable for wood-based products, covering substrates like many panel goods where a consistent sanding pattern is important before laminates or other surfacing steps.
Rubin 2 is designed to eliminate clogging by shedding wood fibers, so the abrasive surface stays exposed and maintains its cutting rate across the full sanding area. This behavior supports more uniform scratch patterns because loaded spots do not skate over the surface. The 30% faster removal rate means that, for a given grit, each pass can remove more material, reducing the time needed to flatten or level parts before moving on. The 30% longer life out of every sheet allows a single disc to stay on the sander for more work, helping maintain consistency across multiple parts in a run. The aluminum oxide, synthetic resin, closed coated construction provides a stable abrasive layer that resists premature wear, which supports repeatable performance from the first part to the last in a sanding batch.
Festool Rubin 2 5 inch 150 grit sanding disc is designed for use on hardwoods, soft woods, tropical woods, and wood-based products, so it supports a wide range of woodworking applications in one abrasive line.
Festool Rubin 2 sanding disc is engineered to shed wood fibers and avoid clogging, delivering a 30% faster removal rate so each disc removes material more quickly during the sanding sequence.
Festool Rubin 2 150 grit sanding disc sits in the mid to fine range within a rapid grit progression from 80 to 220, refining scratches and preparing the surface for finer sanding or finishing.
Festool Rubin 2 5 inch 150 grit sanding disc uses a 9-hole pattern that works with dust extraction to move dust away from the sanding zone, helping the abrasive stay effective and the surface clearer while you work.
Festool Rubin 2 150 grit sanding disc uses a hook and loop backing that allows quick attachment and removal from compatible pads, supporting fast changes as you move through different grits.
Festool Rubin 2 5 inch hook and loop disc uses aluminum oxide with synthetic resin in a closed coated structure, providing a uniform abrasive surface that supports controlled cutting and consistent scratch patterns on wood.
Festool Rubin 2 150 grit sanding disc combines a 5 inch, 9-hole hook and loop format with a wood-focused abrasive design, so it fits sanding tasks on hardwoods, soft woods, tropical woods, and wood-based products. Rubin 2 delivers 30% faster removal and 30% longer life, which supports efficient, repeatable sanding across a full grit progression from 80 to 220. For woodworking shops and serious DIY users who want a consistent abrasive system tuned for wood, this Rubin 2 disc offers a focused option for mid to fine sanding steps.