Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool 5 inch 220 grit sanding discs are aluminum oxide abrasive discs on a paper backing with a hook and loop attachment and 9-hole pattern, so they mount quickly to compatible sanders and stay in place during fine sanding passes. The Rubin 2 design is engineered to quickly shed wood fibers, which keeps the abrasive from clogging so each disc stays sharp longer while working across a project. That shedding behavior supports a 30% faster removal rate, helping crews move efficiently through sanding steps. The same design also delivers 30% longer life out of every sheet, so discs are changed less often during cabinet, furniture, or millwork work. These discs are designed for rapid grit progression from 80 to 220, so sanding sequences reach a finish-ready surface in less time. Festool specifies use on hardwoods, soft woods, tropical woods, and wood-based products, giving one solution across mixed wood jobs.
These Festool Rubin 2 5 inch P220 discs use aluminum oxide on a paper backed disc, so the abrasive cuts wood effectively while the backing supports the grain during sanding passes. The hook and loop attachment lets the disc be applied and removed from compatible sanding pads in seconds, supporting fast grit changes during progression work. A 9-hole layout is part of the disc design, so when paired with a matching pad and dust extraction, sanding dust has defined paths off the surface, helping maintain clear contact between abrasive and workpiece. The synthetic resin bond holds the aluminum oxide grains in a closed coated pattern, placing abrasive densely across the disc, which supports consistent contact on both solid lumber and wood-based sheet goods. This construction aligns with finish sanding at 220 grit, so surfaces are prepared for subsequent finishing steps after the sanding sequence.
Festool describes these Rubin 2 5 inch P220 discs for use on hardwoods like oak or maple, which means they are suitable for fine sanding of cabinet doors, face frames, and furniture parts made from dense species. They are also specified for soft woods like pine or fir, so trim, casing, and panel projects in lighter species can be finished to 220 grit using the same disc type. Festool notes use on tropical woods like ebony or teak, giving coverage for projects that use oily or dense exotic species in furniture or accent work. In addition, these discs are specified for wood-based products, so components made from engineered materials such as panels or other wood-derived substrates can be sanded within the same abrasive system during production.
The Festool Rubin 2 design is engineered to quickly shed wood fibers, so as fibers lift during sanding they are carried away from the abrasive surface instead of packing into the grit, which helps keep the cutting edges exposed. That reduced clogging supports a 30% faster removal rate, so each pass removes more material and surface irregularities are leveled more efficiently across large runs of parts. The stated 30% longer life out of every sheet means the same disc can be used for more work before changing, supporting consistent sanding behavior over longer periods on production lines. These discs are designed for rapid grit progression from 80 to 220, so sequences can be set up with clear steps that move from shaping to finishing while keeping the same Rubin 2 behavior at each grit. The aluminum oxide, synthetic resin, closed coated construction provides a stable cutting surface, so when operators follow a planned progression, they can expect uniform scratch patterns and predictable finishing results across hardwoods, soft woods, tropical woods, and wood-based products.
These Festool Rubin 2 5 inch P220 discs are specified for hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and a range of wood-based products.
The Rubin 2 abrasive is designed to quickly shed wood fibers, which reduces clogging and supports a 30% faster removal rate, so material is sanded down more quickly in each pass.
These Rubin 2 discs are described as providing 30% longer life out of every sheet, so each disc can handle more sanding before replacement during ongoing woodworking or cabinet work.
The P220 grit on these discs fits at the fine end of a rapid grit progression from 80 to 220, preparing wood surfaces for finishing after earlier shaping and leveling steps.
The aluminum oxide, synthetic resin, closed coated construction places abrasive densely across the disc, supporting even cutting contact and a consistent scratch pattern on wood surfaces.
These 5 inch discs use hook and loop backing and a 9-hole pattern, so when matched to a suitable pad and dust extraction, sanding dust can be drawn off through the holes.
Festool Rubin 2 5 inch P220 discs combine aluminum oxide, synthetic resin, and a closed coated design with a 9-hole hook and loop format, so they address fine sanding needs on hardwoods, soft woods, tropical woods, and wood-based products. The Rubin 2 system is engineered to quickly shed wood fibers, supporting a 30% faster removal rate and 30% longer life out of every sheet, which suits repetitive woodworking and cabinet production. For jobs moving through a rapid grit progression from 80 to 220, these discs provide a defined 220-grit step that brings parts to a finish-ready surface. Use Manufacturer Part 499108 from Wurth Baer Supply when a Festool wood-focused 5 inch 220 grit sanding disc fits the sanding plan.