
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinges give a 1/2 inch overlay concealed cabinet hinge that keeps doors aligned while hiding the hardware, which matters when building or upgrading cabinets that need a clean, professional look. The nickel finish hinge uses a zinc die-cast construction, which provides a solid feel during door movement that installers can rely on across a run of doors. A generous 108 degree opening angle allows doors to swing wide, which helps during access, loading, and when aligning adjacent fronts on face-frame runs. These hinges are part of Grass Americas concealed cabinet hinges category, so they are intended for projects where visible surface hinges would conflict with design expectations. The 02870A-15 SMART/PIONEER/TWIN OAKS part number clearly identifies this specific 1/2 inch overlay configuration, which simplifies reordering and matching existing kitchen or casework layouts that already use this hinge family.
This TEC 1/2 inch wrap soft close hinge provides three dimensional adjustment, which means side, depth, and height can be tuned after mounting so doors can be brought into consistent reveals on the face frame. Cam side and depth adjustment on the hinge body lets installers dial in the overlay and in-out position, which is important when matching neighboring doors or aligning with moldings. Height adjustment at the mounting screw gives vertical correction, which helps correct minor drilling or boring variation without reworking the frame. The hinge works with current insertion machinery, so shops using line-boring and hinge insertion equipment can run this hinge in existing processes without changing boring setups.
This hinge is designed as a concealed face frame hinge with a 1/2 inch overlay, which fits cabinet layouts where the door overlays the frame by that amount and the hardware needs to stay hidden from the front. Being in the concealed cabinet hinges product class, it suits kitchen, bath, and built-in casework where a smooth front appearance is part of the design. The nickel finish blends with typical cabinet interiors, which keeps the hardware visually quiet when doors are open. The zinc die-cast hinge body supports the 108 degree opening angle, which helps doors swing clear for better access to shelves and interior hardware. Availability in 42 mm and 45 mm boring patterns means this hinge can be used on cabinet lines already drilled to either standard pattern, which streamlines production when mixing cabinets from different drilling setups within the same shop.
The three dimensional adjustment built into this hinge supports fine-tuning across large door runs, which matters when tight, even reveals are required on face-frame cabinets. Cam side and depth adjustment allow quick changes with a driver instead of remounting, which saves time during final fit when installers are balancing multiple doors and drawer fronts. Height adjustment at the mounting screw lets installers raise or lower the door slightly, which corrects for drilling tolerances or frame variations common in real-world installations. The pre-mounted soft-close damper in the cup eliminates separate damper parts, which reduces extra steps and keeps the closing function tied directly to the hinge position. The one piece hinge and base plate combination ensures that alignment set on the bench carries through to the cabinet, which supports predictable results from sample cabinet through full production. Compatibility with current insertion machinery means hinge cups can be pressed into place using existing shop equipment, which helps maintain cycle times and repeatable boring accuracy. The adjustable switch for closing action lets the same hinge model serve a range of door sizes, which simplifies inventory while still giving installers control over closing speed and feel.
The hinge is a concealed face frame hinge with 1/2 inch overlay, which suits face-frame cabinets where the door overlays the frame by that amount and hardware should remain hidden.
The hinge provides a 108 degree opening angle, which lets doors swing open widely for better cabinet access and easier installation adjustments at the hinge side.
The hinge uses a pre-mounted soft-close damper within the cup, which slows door closing and reduces noise without separate external damper components.
The hinge offers three dimensional adjustment, with cam side and depth adjustment plus height adjustment at the mounting screw, which helps align doors precisely on the face frame.
The hinge works with current insertion machinery and is available in 42 mm and 45 mm boring patterns, which supports production drilling setups used in many cabinet shops.
The manufacturer part number 02870A-15 SMART/PIONEER/TWIN OAKS identifies this specific Grass TEC 864 1/2 inch overlay face-frame soft-close hinge configuration.
Choosing this Grass TEC 864 face frame hinge gives a 1/2 inch overlay concealed hinge with soft-close function integrated in the cup, which supports quiet operation in finished spaces. The one piece hinge and base plate combination paired with three dimensional adjustment helps installers achieve clean, consistent reveals on face-frame cabinets. With 108 degree opening and compatibility with current insertion machinery, this hinge fits smoothly into shop workflows while delivering the concealed cabinet appearance many customers expect on modern projects.
Sold In: 300 Each