Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Zest Series knob combines a lime and polished chrome finish with a 1-9/16 inch length, giving cabinets a defined accent that reads clearly against both light and dark fronts. The 1-1/2 inch width spreads the visual weight, which helps the knob look proportional on doors and drawers of typical residential cabinet sizes. A projection of 1-1/8 inch brings the gripping surface forward, so fingers can grab from above or below without scraping the door face during daily use. The knob is made from zinc and acrylic, pairing a metal base with an acrylic accent that creates a distinct color contrast at the front of the knob. A 1/2 inch base keeps the contact point compact, which leaves more of the door face visible around the knob and supports clean layout lines across a run of fronts.
The 1-9/16 inch length and 1-1/2 inch width define the footprint that must clear neighboring hardware and trim, so layout can maintain even reveals between knob edges and door borders. A 1/2 inch base concentrates the load at a modest diameter, which fits well on narrow rails and stiles where available flat surface can be limited. With a projection of 1-1/8 inch, the knob reaches out from the door or drawer enough for a solid three-finger pull, which is useful when fronts are flush with appliances or adjacent cabinetry. The M4 screw size gives a specific metric thread standard at the mounting point, tying drilling diameter and hardware selection directly to a known fastener size.
The lime and polished chrome finish combination makes this knob suited to cabinets where a strong color accent is wanted on a reflective metal base, helping tie lime details into polished chrome hinges or pulls nearby. With a 1-9/16 inch length, the knob provides a clear horizontal measure that sits comfortably on standard drawer fronts, so a single knob can serve both doors and drawers across a project. The 1-1/2 inch width creates a near-square front profile, which sits visually stable on vertical doors and on wide drawer faces without looking too small. A 1/2 inch base gives a defined circular footprint that lands cleanly on flat panel sections, allowing the knob to sit inside rail and stile frames without overlapping decorative edges. The 1-1/8 inch projection then holds the gripping point out from the face, helping users open loaded drawers or tall doors with a firm purchase.
The zinc and acrylic construction sets a metal base against an acrylic feature, so the mounting point engages the cabinet with zinc while the visible lime element can stand out at the front. This separation between base and accent helps maintain a solid connection at the door surface while keeping color where it is most visible. The defined 1-1/2 inch width and 1-9/16 inch length give predictable coverage on the front, which helps installers repeat spacing and alignment across multiple cabinets without visual drift between pieces. A 1/2 inch base diameter focuses the contact area, reducing interference with profiled edges and letting the knob land cleanly on narrower rails. The 1-1/8 inch projection establishes consistent hand clearance, so users experience the same feel on every door and drawer where this knob is installed. The M4 screw size links the knob to a precise thread standard, providing a clear reference for drilling and hardware planning across cabinet runs that use this part number.
The Berenson Zest Series knob has a 1-9/16 inch length, 1-1/2 inch width, 1-1/8 inch projection, and a 1/2 inch base, which together define its footprint and hand clearance on cabinet fronts.
The lime and polished chrome finish presents a bright lime accent on a reflective chrome base, which creates contrast that stands out visually on both light and dark cabinet surfaces.
The Berenson lime cabinet knob is made from zinc and acrylic, combining a metal base with an acrylic accent so the mounting area stays metal while the color detail appears at the front.
The 1-1/8 inch knob projection moves the gripping surface away from the cabinet face, giving fingers clearance to pull doors and drawers without knuckles rubbing the surface.
The 1/2 inch base keeps the contact area compact, allowing the knob to sit fully on narrow rails or near profiled edges while keeping surrounding door detail visible.
The M4 screw size specifies a metric thread standard for this cabinet knob, guiding drill size and thread matching when planning hardware installation on cabinet fronts.
The Berenson Zest Series knob pairs lime and polished chrome with a zinc and acrylic build, giving both a clear color statement and a defined metal base. With its 1-9/16 inch length, 1-1/2 inch width, 1/2 inch base, and 1-1/8 inch projection, the knob offers known dimensions that simplify layout on doors and drawers. The specified M4 screw size ties the part to a clear thread standard, supporting consistent hardware planning across cabinet runs using this 9772-1000-P knob.
Sold In: 1 Each
