Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SawStop Dust Collection Blade Guard TSG-DC is a blade guard with integrated above-table dust collection for SawStop cast-iron table saws, so installers gain blade coverage and dust capture in a single setup. It attaches directly to the customer's dust collection system, which routes dust into an existing extraction line instead of leaving it over the table. The guard provides protection around the blade while collecting above-table dust, which reduces the chance of injury and minimizes the amount of airborne carcinogenic dust during repeated cuts. Independent lateral sides minimize blade exposure, helping shield hands when working close to the cut line. A low profile guard allows for cuts as narrow as 3/4 of an inch, so narrow-rip work stays guarded instead of forcing guard removal. Anti-kickback pawls reduce the likelihood of kickback, keeping feeding more controlled during ripping tasks.
The SawStop Dust Collection Blade Guard TSG-DC uses tool-free, one lever operation to move between the blade guard and riving knife, so installers can change from guarded through-cuts to non-through riving-knife work without separate tools. This single-lever action simplifies transitions when alternating between different cut types during a job. Because it attaches directly to the customer's dust collection system, the guard ties into the existing dust network without extra power or switching steps at the saw. A low profile guard that allows cuts as narrow as 3/4 of an inch keeps the guard usable across a wider range of setups, which helps maintain consistent guarding instead of stopping to remove and reinstall.
This blade guard with integrated dust collection is designed for SawStop cast-iron saws, so it suits cabinet and contractor shops using that table format. It is compatible with ICS, PCS, and CNS models, which covers industrial cabinet saws, professional cabinet saws, and contractor saws within the SawStop lineup. That compatibility lets a shop standardize above-table dust capture across multiple SawStop stations using one guard style. The guard also works with SawStop Overarm Dust Collection, so operations running an overarm system can align above-table capture with their existing overarm setup for more consistent dust removal.
The blade guard provides protection around the blade while collecting above-table dust, which maintains better visibility at the cut line as dust is pulled away instead of building up on top of the workpiece. Independent lateral sides that minimize blade exposure still allow material to pass while presenting less open tooth area near the operator's hands. The low profile design that permits cuts as narrow as 3/4 of an inch keeps more operations guarded, so repetitive narrow rips on rails or trim stay under the same safety and dust control setup. Anti-kickback pawls that reduce the likelihood of kickback help hold stock down and moving forward, supporting smoother rip quality. Tool-free, one lever operation between blade guard and riving knife reduces downtime between setup changes, letting installers shift from through-cuts to specialty cuts while keeping the saw configured with factory-designed guarding. A 1 Year Warranty backs the TSG-DC, which supports long-term use in regular shop schedules.
The SawStop Dust Collection Blade Guard TSG-DC is a blade guard with integrated above-table dust collection for SawStop cast-iron saws, combining guarding and dust capture in one assembly.
The SawStop Dust Collection Blade Guard TSG-DC is compatible with ICS, PCS, and CNS models, so it fits industrial cabinet, professional cabinet, and contractor SawStop saws.
The SawStop Dust Collection Blade Guard TSG-DC attaches directly to the customer's dust collection system, routing captured dust into the existing dust network during cutting.
The SawStop Dust Collection Blade Guard TSG-DC has a low profile design that allows for cuts as narrow as 3/4 of an inch while the guard remains over the blade.
The SawStop Dust Collection Blade Guard TSG-DC uses anti-kickback pawls that reduce the likelihood of kickback by helping keep stock moving forward through the cut.
The SawStop Dust Collection Blade Guard TSG-DC uses tool-free, one lever operation, so users quickly switch between blade guard and riving knife during different cutting setups.
The SawStop Dust Collection Blade Guard TSG-DC combines blade protection, anti-kickback pawls, and above-table dust collection in a design made for SawStop cast-iron saws. Compatibility with ICS, PCS, and CNS models and connection to the customer's dust collection system ties guarding and dust capture into existing SawStop stations. A low profile guard that allows cuts as narrow as 3/4 of an inch and tool-free, one lever operation between guard and riving knife support efficient changeovers. For shops standardizing on SawStop with integrated dust control backed by a 1 Year Warranty, this guard aligns with daily cutting workflows.
Sold In: 1 Each