Knape And Vogt WUSC Bottom Mount Waste Pullout

Knape and Vogt WUSC bottom mount waste pullout is a wood drawer box system that captures the bins to provide a clean, neutral look. This integrated drawer box keeps the two 35 quart white bins contained, which helps keep cabinet interiors visually consistent on higher-end jobs. The unit belongs to the Bottom Mount Trash Pullouts class, so it supports projects where a floor-mounted solution is preferred inside the cabinet. The heavy-duty undermount slide features soft-close technology, which lets the pullout close in a controlled way and reduces door slamming in busy kitchens. The birch drawer box conceals hardware, which hides working components from view and gives a more finished appearance when the cabinet is open. With a 30 lb maximum weight rating per bin and 100 lb total weight limit, the pullout supports typical mixed waste and recycling loads while staying within the hardware capacity.

Key Details That Support Daily Waste Management

• The wood drawer box captures bins and provides a clean neutral look, so the waste area matches surrounding cabinetry better than exposed metal frames in visible kitchen or bath installations.
• The heavy-duty undermount slide with soft-close technology allows the pullout to operate smoothly and close gently, which helps reduce noise and wear in high-use residential or light commercial environments.
• The birch drawer box conceals hardware, keeping slides and fasteners out of sight and giving a more built-in appearance when the waste pullout is extended for use or cleaning.
• The unique, washable, solid floor prevents debris from falling through to the cabinet floor, which simplifies cleanup and helps maintain a cleaner base in the waste compartment over time.
• Waste bins are available in white and platinum, so designers and installers can match or contrast bin color with cabinet interiors or project palettes as required.
• The 30 lb maximum per bin, not to exceed 100 lb total weight capacity, gives clear load limits that help size waste and recycling use without overloading the undermount slide system.

Bottom Mount Waste Pullout Installation And Setup

This Knape and Vogt bottom mount trash pullout installs using self-aligning brackets, so the alignment process is built into the hardware and reduces setup steps during cabinet work. The brackets are secured with only six screws, which streamlines attachment to the cabinet base and helps control installation time on multi-unit projects. Because the system is bottom mount, it sets directly on the cabinet floor, which can simplify layout in standard base cabinets compared to side-mount assemblies. The undermount slide is integrated with the wood drawer box, so once the base is set and fastened, the moving section tracks along the factory-aligned slide path. The washable, solid floor stays in place under the bins after installation, so any spilled material is captured in the pullout and can be cleaned without accessing the cabinet floor.

Using This Double 35 Quart Trash Pullout In Projects

Where This 14-5/8 Inch Birch Pullout Fits Best

The product name lists a 14-5/8 inch birch bottom mount waste pullout, which targets cabinetry sized for that width class and allows planning around typical 15 inch cabinet openings. The two 35 quart white bins give a defined capacity for waste and recycling, which helps designers decide if a single or double station suits the project. Being part of the Kitchen & Bath Cabinet Accessories category, this pullout supports installations in base cabinets near sinks, prep zones, or vanities where contained waste is required. The birch drawer box offers a neutral wood appearance that pairs well with many interior finishes, fitting both traditional and contemporary cabinet lines. Since the hardware is concealed, the unit is suited to applications where the cabinet interior is expected to look finished when the pullout is extended, such as open-plan kitchens.

Details That Support Repeatable Pullout Performance

The heavy-duty undermount slide with soft-close technology manages the movement of the loaded bins, which helps keep motion consistent even as waste levels change. Because the slide is rated for 30 lb maximum per bin, not to exceed 100 lb total, installers and users have specific load boundaries that relate directly to performance expectations. The self-aligning brackets used in installation assist with squaring the pullout to the cabinet, which supports smooth tracking over repeated cycles in both residential and multi-unit work. Securing the system with only six screws creates a defined fastening pattern, which helps keep installations consistent across several cabinets on a job. The unique, washable, solid floor intercepts debris, so material does not reach the cabinet base and interfere with the slide area, supporting long-term movement and easier cleaning using standard maintenance routines.

Common Questions About This Soft-Close Waste Pullout

Selecting This WUSC Pullout For Cabinet Projects

The Knape and Vogt WUSC15-2-35WH bottom mount trash pullout pairs a birch wood drawer box with two 35 quart white bins, giving a defined layout for waste and recycling inside base cabinets. The heavy-duty undermount slide with soft-close technology supports smooth, quiet operation where doors and fronts see frequent use. With a unique washable solid floor and hardware concealed inside the drawer box, the unit keeps debris contained and visual lines clean in finished interiors. For projects needing a bottom mount pullout in the Bottom Mount Trash Pullouts class, this WUSC assembly offers a clear combination of bin volume, load rating, and soft-close function ready to integrate into cabinet layouts.