Knape and Vogt WUSC 16-7/8" Birch Bottom Mount Waste Pullout with 2-50 Quart White Bins Soft-Close, WUSC18-2-50WH

Bottom Mount Trash Pullouts For Cabinet Waste

Bottom mount trash pullouts define this Knape and Vogt WUSC18-2-50WH unit as a wood drawer box system that captures the bins, so the installer gets a clean, neutral look instead of exposed baskets inside the cabinet. The birch construction of the drawer box provides a warm, wood appearance that blends with many cabinet interiors while still controlling the position of the waste bins during use. A heavy-duty undermount slide with soft-close technology supports the box from below, which helps keep the mechanism out of sight while guiding the pullout smoothly back into the cabinet. The soft-close action also pulls the load closed in a controlled way, reducing slamming against the face frame. Two 50 quart white waste bins give generous capacity inside the same footprint, allowing separation of trash and recycling while using the same pullout hardware and motion path.

Key Knape And Vogt Waste Pullout Details

• The wood drawer box captures the bins, which stabilizes them during travel and presents a single, unified front edge for a cleaner cabinet interior.
• The birch material of the drawer box creates a neutral appearance that suits a range of kitchen and bath cabinet finishes in everyday use.
• The heavy-duty undermount slide with soft-close technology supports regular opening and closing while keeping metal hardware hidden below the bin platform.
• The unit installs using self-aligning brackets secured with only six screws, which streamlines mounting by allowing the hardware to square itself while fasteners are driven.
• A unique, washable, solid floor under the bins prevents debris from falling through to the cabinet or room floor, simplifying clean-up over time.
• The listed weight capacity is 30 lb maximum per bin, not to exceed 100 lb total, which helps size the load for typical residential waste and recycling.

Installation, Fit, And Undermount Slide Function

The Knape and Vogt WUSC18-2-50WH uses a heavy-duty undermount slide, so the runners attach beneath the wood drawer box and carry the load from below instead of at the sides. This configuration keeps metal components mostly out of sight when the pullout is extended, which helps match higher-end cabinet interiors. The product uses self-aligning brackets held with six screws, so the brackets position the slide and drawer box relative to each other while fasteners are driven. That relationship between bracket and slide is designed to shorten layout time and support repeatable alignment from cabinet to cabinet. The 16-7/8 inch dimension in the name indicates the nominal drawer box length, which helps installers relate the pullout to cabinet depth during layout and planning.

Using This Soft Close Waste Pullout In Projects

Where The Double 50 Quart Waste Pullout Fits Best

The Knape and Vogt WUSC18-2-50WH bottom mount trash pullout belongs in kitchen and bath cabinet applications where a concealed waste solution is preferred over freestanding cans. Its wood drawer box captures the two 50 quart white bins, holding them as a single unit so they track together on the undermount slide. This configuration suits base cabinets that can accommodate a 16-7/8 inch birch drawer box and need both trash and recycling capacity behind a door. The category designation as a bottom mount trash pullout places the load directly on the cabinet floor or bottom panel through the brackets and slide, which is useful where side panels are already committed to hinges or other hardware. With the hardware concealed under the solid floor, the visible interior is dominated by the birch box and white bins rather than metal slide components.

Why These Design Details Support Consistent Results

The heavy-duty undermount slide with soft-close technology in this waste pullout guides the loaded bins on a fixed path, which helps control racking and reduces the chance of misalignment from repeated use. Soft-close action draws the drawer box and bins into the cabinet gently at the end of travel, which reduces impact on door fronts and cabinet joinery during daily operation. Self-aligning brackets secured with six screws coordinate the position of slide and box, which can reduce layout variability between installations and help the front clear the opening consistently. The unique, washable, solid floor under the bins stops loose debris from dropping into hard-to-reach cabinet corners, so routine cleaning focuses on a single, accessible surface. The specified capacity of 30 lb per bin, up to 100 lb total, defines the working load range so installers and users can match the amount of household waste to the pullout's intended limits and preserve smooth motion.

Common Questions About This Knape And Vogt Pullout

Selecting This Unit For Waste Management Projects

The Knape and Vogt WUSC18-2-50WH combines a birch wood drawer box, double 50 quart white bins, and a heavy-duty undermount soft-close slide into a single bottom mount trash pullout system. For cabinet projects where concealed waste is planned into the layout, these integrated elements define how the pullout will look, carry weight, and move over its life in service. When a project calls for a neutral wood interior, controlled soft-close motion, and known load limits in a kitchen or bath waste station, this model offers a clearly defined set of characteristics ready to be worked into the cabinet design.