Pro Value Series Concealed Hinge for Half Overlay Doors

This Pro Value Series concealed hinge is built for half overlay doors on face-frame and frameless cabinets, with a self-close spring and dowel mounting suited to production and CNC-bored work.

Key Features

• Half overlay, half crank arm positions the door over half the cabinet side, the correct geometry for two doors sharing a single partition.
• Self-close spring pulls the door shut from a few degrees open so it does not stand ajar.
• 110 degree opening delivers standard, everyday cabinet access.
• Dowel mount presses the cup into pre-bored dowel holes in the door for a fast, screw-free door-side installation.
• 35mm cup, 45mm boring pattern matches the standard CNC setup across production shops.
• Works on face-frame and frameless cabinets when paired with the appropriate base plate, sold separately.

Where the Half Overlay Geometry Does the Work

Half overlay is the hinge geometry for cabinets where two doors meet on a shared center partition. Each door covers roughly half of that partition, so the arms on adjacent hinges stay clear of each other when both doors open. It also applies wherever a door overlays only part of the cabinet side rather than covering it fully. The half crank in this hinge sets that position precisely, and the 110 degree swing gives a clean, unobstructed opening once the door clears the frame.

The cup bores into the back of the door at the standard 35mm diameter with 45mm hole spacing, and the arm connects to a base plate mounted on the cabinet. That base plate is a separate purchase matched to your cabinet construction, whether face-frame or frameless. Use a Salice-compatible or Pro Value plate from the same product family for the correct arm engagement. Plates from other brands will not connect to this hinge.

Steel Build, Nickel Finish, Dowel Installation

The hinge body is steel with a nickel finish. The dowel mount is the production-friendly detail here: pre-mounted dowels on the cup press into bored holes in the door, which removes the cup-screw step from the install sequence and keeps the workflow moving on CNC-bored doors. Self-close is spring-driven, not damped. The door is pulled shut firmly and holds closed without a catch, which is the right mechanical behavior for doors in high-use areas where a magnetic catch would be one more thing to replace.

Who This Hinge Is For

This is a working hinge for cabinet shops and contractors running partial-overlay doors in volume. The dowel mount is the reason to reach for it over a screw-cup version when the door blanks are coming off a CNC with dowel holes already bored. It suits both face-frame and frameless boxes, so a single part number covers a mixed job. For shops or homeowners who need a quieter, cushioned close, the soft-close version in this family is the better fit. This hinge springs the door shut; it does not slow it down on the way in.

Common Questions

Reliable, Repeatable Installs on Partial Overlay Doors

Specify this hinge when the job calls for half overlay doors on CNC-bored blanks, a consistent self-close, and a single part number that handles both face-frame and frameless cabinets across a run.