Wide-Angle Concealed Hinge For Half Overlay Doors on Face-Frame and Frameless Cabinets

This Pro Value Series concealed hinge brings a 125 degree opening to half overlay doors, a wider swing than the standard 110 degree hinge, on both face-frame and frameless cabinet boxes. The half crank arm sets the door at a partial overlay, the geometry suited to two doors sharing a center partition or a single door covering part of the cabinet side.

Key Features

• 125 degree opening angle swings the door back farther than a standard hinge, giving better access to the cabinet interior.
• Self-close spring draws the door shut over the last few degrees of travel, so doors do not hang open.
• Half overlay, half crank arm positions the door at a partial overlay for two-door shared-partition layouts or partial-overlay single doors.
• Dowel mount cup presses into pre-bored dowel holes for a clean, screw-free door attachment in production environments.
• Works on face-frame and frameless cabinets when paired with the appropriate base plate, sold separately.

More Swing Where the Layout Demands It

A 125 degree opening gives noticeably more clearance than the everyday 110 degree hinge. That extra swing is useful wherever a door needs to clear an adjacent surface, open fully against a wall, or simply give easier reach into a deep cabinet. This hinge delivers that wider arc at the half overlay position, so it suits the partial-overlay doors found on double-door runs where two panels meet on a shared partition, each covering roughly half the cabinet side. The 35mm cup bores into the door panel. The arm clips or screws to a base plate mounted on the cabinet, which is a separate purchase matched to your cabinet construction and brand series.

Nickel Finish and Dowel-Ready Construction

The hinge is finished in nickel on a steel body. The dowel mount means the cup arrives with pre-attached dowels that press into bored holes in the door face, eliminating cup screws and speeding up production boring runs. The 45mm boring pattern fits the standard layout used across most production lines. Self-close is handled by an internal spring that engages over the last few degrees, pulling the door flush without a cushioned landing: this is a spring self-close, not a soft-close damper, so the door closes firmly.

Who Reaches for This Hinge

Cabinet shops running CNC-bored door panels will find the dowel mount the fastest path to a finished door. The wider opening suits runs of cabinets where access matters, like pantry towers, utility storage, or any layout where a standard swing feels tight. It handles both face-frame and frameless boxes, so a shop with a mixed order does not need two different hinge lines for the same overlay position. For installs that call for a quiet, damped close instead of a spring pull, the soft-close version of this series is the right step up.

Common Questions

Better Access, Consistent Closure, Half Overlay Precision

Specify this hinge when the job calls for a wider opening angle at the half overlay position, dowel-ready door attachment, and a self-close spring that keeps doors shut on face-frame and frameless boxes alike.