Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Pro Value Series concealed hinge brings 155-degree wide-angle opening to full overlay doors on both face-frame and frameless cabinets, with soft-close built in and a dowel mount that presses into the door's pre-bored holes.
A 155-degree opening is the widest angle available with integrated soft-close, and the difference is tangible on corner cabinets, appliance garages, and pantry pulls where a standard 110-degree swing leaves a door in the way. At 155 degrees the door lies back close to the cabinet side, clearing the opening fully and keeping the work zone unobstructed. That clearance is the reason to specify this hinge: it solves the access problem on doors where a standard swing does not. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted to the cabinet, which is a separate purchase matched to your cabinet construction and door position.
The hinge is steel with a nickel finish. The soft-close damping is integrated into the arm, so there is nothing to add and no separate adapter to source. The dowel mount locks the cup securely in the door without screws at the cup face, which is the preferred method in CNC and production shops where speed and repeatability matter. The 45mm bore pattern aligns with standard pre-drilled doors, so replacement and new-build installs follow the same setup.
Reach for this hinge on cabinet runs where access depth or door adjacency makes a standard opening angle too tight. Corner base cabinets, full-height pantry doors, and bi-cabinet arrangements where a door at 110 degrees blocks another are the natural homes for a 155-degree hinge. It suits face-frame and frameless boxes equally, so it works across traditional and European-style kitchen builds without switching hinge families. Cabinet shops running CNC-bored doors will find the dowel mount especially efficient. For doors in the standard 16 to 22mm thickness range, this hinge fits without modification. Doors thicker than 22mm need a thick-door hinge instead.
No. The hinge arm connects to a base plate that mounts to the cabinet, and that plate is sold separately. Choose a plate matched to your cabinet type, face-frame or frameless, and the overlay position you need.
155 degrees is the widest opening angle at which integrated soft-close damping is mechanically available. For a 170-degree hinge you would be looking at a free-swinging or self-close design, not soft-close.
The cup uses pre-attached dowels that press into bored dowel holes in the door, so the door needs to be bored for dowel-mount hinges rather than for cup-screw hinges. It is the standard setup on CNC-bored production doors.
No. Use a base plate from the same brand and series. Plates are not interchangeable across brands, and the arm engagement and bore pattern are specific to this product line.
When a standard swing leaves a door in the way, this 155-degree soft-close hinge opens the cabinet fully and pulls it back together quietly, on face-frame or frameless boxes and in any production environment bored for dowel-mount hardware.
Sold In: 1 Each