Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tiomos face frame adapter base plates for wood screws are Grass America hinge mounting plates designed to mount Tiomos hinges to face frame cabinets using wood screw fastening. The 1.5mm height sets a consistent mounting plane between the cabinet frame and door, which supports accurate hinge alignment across multiple openings. As hinge mounting plates, these parts form the interface between the Tiomos hinge arm and the face frame, so their fixed height directly affects reveal consistency and door positioning. The Grass America brand ties this plate directly to the Tiomos hinge family, which helps keep hardware choices aligned on a hinge run. With a dedicated adapter base plate instead of improvised shims, installers get a defined reference height from the frame, which simplifies layout when repeating the same setup on a bank of cabinets.
The Tiomos face frame adapter base plates for wood screws rely on 2 point fixing, so each plate anchors to the face frame at two locations while the wood screws clamp the steel to the cabinet. With height adjustment via elongated screw holes, the installer can slightly slide the plate up or down before final tightening, giving a practical way to correct small layout variations after the door is hung. The 1.5mm height sets the base level for the Tiomos hinge arm, meaning every plate in a run supplies the same reference height, which supports doors that line up across the cabinet front. Because the plate is part of the Grass America Tiomos system, it maintains the intended relationship between hinge arm geometry and face frame position during installation.
This 1.5mm Tiomos face frame adapter plate sits on the cabinet face frame as a hinge mounting plate in the Tiomos system, positioning the hinge arm relative to the frame stile. In a face frame layout, the plate defines how far the hinge arm stands off the frame, and the 1.5mm height keeps that distance controlled. The two point fixing with wood screws holds the plate directly to the frame material, so the plate becomes the structural link between the door hinge and the cabinet. On banks of doors, using the same 1.5mm height plate across the run supports repeatable door spacing because the hinge arms all reference the same offset from the frame edge. Since the plate is made of steel with a nickel-plated finish, it integrates as a metal component inside the cabinet while aligning with other metallic hardware in the hinge line.
The 1.5mm Tiomos face frame adapter plate height defines a known starting dimension for the hinge stack, which is important when installers repeat drilling patterns and screw locations from cabinet to cabinet. Because the plate height stays constant, door reveals depend more on consistent frame construction and hinge placement rather than improvised spacers. The elongated screw holes add a small but useful height adjustment range, giving room to nudge the plate to compensate for minor drilling or frame variation so multiple doors can be leveled against one another. The 2 point fixing helps the plate hold its orientation during that adjustment, so vertical shifts do not twist the base plate as screws are tightened. With steel and nickel-plated construction, the mounting plate keeps its shape as screws cut into the wood, providing a stable face for the Tiomos hinge arm in long-term cabinet use.
This Tiomos part is a Grass America hinge mounting plate for face frame cabinets, so it provides the mounting interface between Tiomos hinges and the cabinet frame.
The 1.5mm height sets a consistent hinge offset from the face frame, which supports even door reveals when the same plate is used across multiple cabinet openings.
On this plate, 2 point fixing means two mounting locations secure it to the face frame, helping keep the hinge base square so the door moves predictably.
The elongated screw holes allow slight vertical movement of the plate before tightening, giving the installer a way to fine tune door height against adjacent fronts.
The steel construction creates a rigid base for the Tiomos hinge loads, while the nickel-plated finish provides a clean metal surface that matches other hinge hardware.
This adapter plate is specified for wood screws, so the hinge mounting plate fastens directly into the cabinet face frame material using screw threads.
The Tiomos face frame adapter base plates for wood screws, 1.5mm height from Grass America provide a defined hinge mounting plane, 2 point fixing, and height adjustment via elongated screw holes. For projects using the Tiomos hinge family on face frame cabinets, this 1.5mm steel, nickel-plated mounting plate offers a consistent hinge offset and a practical vertical adjustment range at the plate itself. Choosing this part number, F058139821228 SMART, aligns the hinge mounting plate with the Tiomos system geometry so the hinge arms land on a base designed for that hardware pattern.
Sold In: 150 Each