Knape And Vogt 24 Inch Soft Close Drawer Slides

Knape and Vogt 24 inch soft close drawer slides are 4450 Series full extension, ball bearing, side mount slides designed for drawers up to 24 inches wide, so they support typical base and utility drawer applications with a defined width limit. The soft-close function is identified in the description as soft close, which means the drawer travel is controlled into the closed position, helping reduce slamming in everyday use. A full extension design lets the drawer travel its full length, providing access to the entire drawer box in cabinets or casework where reach to the back matters. These slides are unhanded side mount, so a single model works on either side of the drawer, simplifying ordering and layout. As part of the Knape and Vogt 4450 Series, the 4450B 24 model ties directly to a known product family, which helps match slides across similar projects and repairs.

Key 4450B 24 Details For Cabinet Projects

• The slide length is 24 inches, so it pairs with drawer boxes built around that nominal length, supporting predictable travel and stop positions in standard base cabinets.
• Height is specified as 1-13/32 inches, which sets the vertical space the slide needs on the drawer side, aiding layout where stack clearances or narrow openings matter.
• Side clearance is listed as 1/2 inch plus 1/32 inch minus 0 inch each side, giving a defined tolerance window for building drawer boxes that run smoothly without excessive play.
• The maximum drawer width is 24 inches, so drawers wider than that are outside the intended application, while drawers at or under that width align with the slide's design scope.
• The zinc finish is specified, providing a bright metal appearance that also helps resist normal cabinet environment humidity compared with unfinished steel surfaces.
• A 32 mm pattern is indicated, which aligns with common system boring layouts, streamlining drilling patterns in shops that already work with 32 mm cabinet construction.

Mounting, Fasteners, And Fit For Installation

These Knape and Vogt 4450B 24 slides mount as side mount units, so they reference off the cabinet side and drawer side for straightforward alignment in typical face-frame or frameless cabinets built around side-mount geometry. The recommended fasteners are #6 x 7/16 inch Phillips pan head screws, giving a specific screw size and head style that matches the slide's mounting holes and material thickness, which supports secure attachment without over-penetrating common cabinet stock. Side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side sets the drawer box width relative to the opening, helping builders size boxes to balance easy travel with controlled side-to-side motion. The unhanded configuration means the same slide model works on either the left or right side, reducing separate part numbers to track on the bench.

Using 4450 Series Slides In Everyday Work

Where Knape And Vogt 4450B 24 Slides Fit Best

The Knape and Vogt 4450B 24 slide is described as a 24 inch full extension soft-close ball bearing drawer slide, so it suits drawer boxes built around that length where full access to stored items is required. With a maximum drawer width of 24 inches, it fits typical kitchen, bath, and shop drawers sized at or under that limit, keeping the slide within its intended envelope. The height of 1-13/32 inches lets it work in drawer stacks where vertical space between drawers is moderate, giving room for the slide without pushing drawer fronts too close together. A side clearance spec of 1/2 inch plus 1/32 inch minus 0 inch on each side ties directly into box sizing, so production and custom shops can standardize drawer widths around a repeatable clearance value. Because the slide is unhanded side mount, the same part runs on both sides of the drawer, aligning well with shops that want a single SKU for left and right without separate inventory slots.

Details That Support Consistent Drawer Performance

The soft-close function on this 4450 Series slide regulates the last part of closing, which helps drawers settle smoothly against the cabinet front in everyday use. Full extension travel means the slide lets the drawer extend out to its full 24 inch length, so users can reach items stored at the very back without shifting contents forward. Ball bearing construction, named in the category as side mount, ball bearing slides, is designed to provide a smoother running action than simple friction slides, which benefits drawers that see frequent cycles. The zinc finish supports use in interior cabinet environments where basic corrosion resistance and a clean metal look matter. A 32 mm pattern noted in the description aligns mounting holes with system-bored cabinet sides and drawer members, so drilling and jig setups can follow familiar spacing. The push button release feature allows a user to separate drawer and cabinet members by operating a button on the slide, which can simplify drawer removal for adjustments, finishing, or service work. The hold-in detent feature retains the drawer in the closed position until a pull force overcomes the detent, helping drawers stay closed in normal use. When paired with the recommended #6 x 7/16 inch Phillips pan head fasteners, the slide has a mounting combination meant to match its hole design and cabinet materials.

Common Questions About 24 Inch 4450B 24 Slides

Select Knape And Vogt 4450B 24 For Side Mount Jobs

The Knape and Vogt 4450B 24 full extension soft-close ball bearing drawer slide combines a 24 inch length, 24 inch maximum drawer width, and 1/2 inch plus 1/32 inch minus 0 inch side clearance, giving clear build targets for cabinet and drawer sizing. Its unhanded side mount design, zinc finish, 32 mm pattern, push button release, and hold-in detent features all tie back to the same goal: a slide that fits system-based layouts and everyday drawer use. For projects that match these dimensions and mounting details, this 4450 Series model aligns with side-mount, soft-close drawer requirements.