12VDC/24VDC 16 AWG Class 2 Wire Roll, 50', White

16 AWG Class 2 Wire Roll For Lighting Runs

16 AWG Class 2 wire roll gives you a dedicated 50 foot length of white, 16-gauge Class 2 cable rated for 12VDC and 24VDC Tresco Lighting systems, so low-voltage lighting runs can follow a consistent wiring standard across your project. This wire is identified by manufacturer part number L-16CL2-WH50-1 from Tresco Lighting, which helps match it correctly to the rest of the Tresco system components on your job. The product is classified under connectors and connecting cables, so it serves as the link between Tresco light fixtures and related connectors during layout. Class 2, 16-gauge construction provides the minimum wire size required for in-wall applications, so runs that go through wall cavities can meet that Class 2, 16-gauge threshold when that wiring method is used.

Key Class 2 Wire Details For Lighting Work

• This 12VDC/24VDC, 16 AWG Class 2 wire roll in white gives a clear visual identification path along the run, which helps distinguish it from other low-voltage lines during installation and later service.
• The 50 foot roll length provides a single continuous run for many typical cabinet or room-scale lighting layouts, reducing mid-run terminations that can add resistance or extra connection steps.
• Class 2, 16-gauge rating establishes it as the minimum size suitable for in-wall applications, so routed paths inside walls can rely on a wire that matches that Class 2, 16-gauge requirement.
• Placement in the connectors and connecting cables category ties this wire directly to Tresco lighting system connection points, which supports a consistent approach when planning your low-voltage layout.
• The Tresco Lighting branding and part number L-16CL2-WH50-1 provide a specific match reference, which matters when reordering the same wire for future projects or extensions.

Installation Role Of Class 2, 16-Gauge Wire

This 16 AWG Class 2 wire roll is specified as the minimum 16-gauge Class 2 wire for in-wall applications, so any low-voltage paths you route through walls for Tresco lighting can follow that gauge standard. Tresco notes that wires that are attached to or accompany their lighting systems are not approved for in-wall use, so using a separate Class 2, 16-gauge wire addresses that in-wall requirement when you choose to run lighting feeds through wall spaces. Because it is listed for 12VDC and 24VDC Tresco Lighting systems, this wire fits into those system voltages, keeping your runs aligned with the intended operating range of the lights and drivers.

Using Tresco Class 2 Wire In Lighting Layouts

Where This 16 AWG Class 2 Wire Fits Best

This 12VDC/24VDC 16 AWG Class 2 wire is intended for Tresco Lighting systems, so it slots into projects that already specify Tresco fixtures and related low-voltage components. The wire is described as Class 2, 16-gauge, with that 16-gauge size stated as the minimum for in-wall applications, so wall-routed home or commercial cabinet lighting circuits can use this gauge to satisfy that minimum wire requirement in those in-wall runs. The white color helps visually track lighting circuits behind cabinets or along framing where multiple conductors are present, supporting easier tracing of the correct Class 2 path across the job.

Why Wire Rating And Roll Length Support Workflow

The identification as 16 AWG Class 2 wire for 12VDC and 24VDC Tresco systems means every run built from this roll shares the same Class 2 rating, which helps standardize your low-voltage lighting wiring across different areas of the installation. The 50 foot roll length supplies a defined amount of wire to work with, which helps lay out multiple short runs or a single extended route without frequent splices that can interrupt the Class 2 circuit path. Tresco notes that wires attached to or accompanying their lighting systems are not approved for in-wall use, so relying on this separate Class 2, 16-gauge wire for in-wall applications separates in-wall circuits from surface or cabinet-mounted fixture leads. The classification under connectors and connecting cables emphasizes its role as a dedicated connection medium, which supports organized wiring paths between lights, barrel connectors such as RSLLED-WCON-WH-1, and power sources within the Tresco layout.

Common Questions About Tresco Class 2 Lighting Wire

Select This Class 2 Wire For Tresco Lighting

This 12VDC/24VDC 16 AWG Class 2 wire roll in white from Tresco Lighting gives you a 50 foot, Class 2, 16-gauge option that meets the stated minimum for in-wall applications while matching Tresco low-voltage system requirements. By using the L-16CL2-WH50-1 wire within Tresco lighting layouts and with barrel connectors such as RSLLED-WCON-WH-1, lighting circuits can follow the Class 2, 16-gauge standard from drivers through wall runs to the fixtures. For projects that call for Tresco Lighting connectors and connecting cables, this dedicated Class 2, 16-gauge roll provides a clear wiring choice for building consistent low-voltage runs.