Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Tempo pull 128mm center to center defines this handle as part of the Tempo collection, so multiple pulls can match across a project where a consistent style is needed. The pull is identified as a Berenson Tempo Series piece, giving installers a clear line reference when coordinating other Berenson Corporation decorative hardware. The center to center measurement of 5-1/16 inches (128 mm) sets the drilling layout for the door or drawer front, which helps repeat hole spacing across cabinets. Overall length of 7-3/8 inches provides a wider grip span, which can be useful on larger drawer fronts or wider doors needing more hand clearance. The projection of 1-3/8 inches defines how far the pull stands off the surface, giving fingers room to grab without rubbing the cabinet face. A width of 1/2 inch creates a slim profile, supporting a clean look on modern cabinetry while keeping enough surface to pull comfortably.
This Tempo Series polished chrome pull uses a 5-1/16 inch (128 mm) center to center spacing, so holes on the cabinet face align directly along that distance for mounting. The 7-3/8 inch length lets the pull extend past those holes, which can visually balance wider drawer fronts during layout. A width of 1/2 inch keeps the pull narrow, which works well on face frames or slab fronts where a streamlined handle line is preferred. The 1-3/8 inch projection defines stand-off from the door or drawer, helping the pull clear raised edges or trim around the opening. The product is described as a pull in the Handles and Pulls category, indicating its role as the gripping point on cabinet doors or drawers. The Tempo pull designation and center to center dimension work together to guide installers toward consistent placement on multiple fronts.
The Berenson Tempo Series 5-1/16 inch (128 mm) center to center polished chrome pull is described within the Handles and Pulls, Berenson product class, positioning it for cabinet and drawer applications needing a handle-style grip. Its 5-1/16 inch center to center spacing supports use on cabinet doors and drawers drilled to that spread, so it can serve on kitchen, bath, or built-in cabinetry using that layout. The polished chrome finish coordinates with other polished chrome decorative hardware and molding elements, which can help tie together hinges, knobs, and pulls in the same room. Its 7-3/8 inch length places more metal across the front of the door or drawer, so it can visually suit medium to wider fronts where a short pull might look undersized. The Tempo collection reference identifies it as part of a named series, which matters when a designer or installer is repeating the same style across multiple cabinet runs.
The steel material of this Tempo pull establishes a metal construction that can handle the repeated load of pulling cabinet doors and drawers during regular use. With a 1-3/8 inch projection, the pull provides predictable clearance from the cabinet face, which helps maintain the same hand spacing across every door when multiple pulls are installed. The 1/2 inch width keeps the handle slim, which allows close placement to adjacent doors without crowding, especially in tighter cabinet layouts. The 5-1/16 inch (128 mm) center to center dimension is a precise drilling reference, so jigs or templates set to 128 mm can be used across an entire bank of cabinets for consistent alignment. The manufacturer part number 2014-2026-P uniquely identifies this specific Tempo pull in polished chrome, which helps match future replacements or additions to existing installations. The SAP description TEMPO PULL 128MM CC POL CHR reinforces the key details - Tempo line, pull function, 128 mm spacing, and polished chrome finish - which all contribute to specifying the same part again without confusion.
The Berenson Tempo pull has a 5-1/16 inch (128 mm) center to center, 7-3/8 inch overall length, 1/2 inch width, and 1-3/8 inch projection, giving clear layout and clearance measurements.
The 2014-2026-P Tempo pull is made from steel, providing a solid metal construction suited to repeated cabinet door and drawer operation.
This Tempo Series cabinet pull has a polished chrome finish, giving a bright, reflective look that coordinates with other polished chrome decorative hardware.
The 128 mm center to center dimension matches a common drilling spread, allowing holes laid out at 128 mm to line up with the pull mounts repeatedly.
The 1-3/8 inch projection shows how far the pull stands off the cabinet face, giving fingers space to grip without contacting the door or drawer surface.
The Tempo collection designation links this pull to other Tempo pieces, helping match style and finish across multiple cabinets in the same project.
The Berenson Tempo Series 5-1/16 inch (128 mm) center to center polished chrome pull offers defined dimensions and a named collection, which supports consistent cabinet layouts. With a 7-3/8 inch length, 1/2 inch width, and 1-3/8 inch projection in steel, it provides clear mounting and clearance characteristics. The polished chrome finish aligns with the SAP description TEMPO PULL 128MM CC POL CHR, tying finish and spacing into a single part reference. For cabinet or drawer fronts drilled at 128 mm center to center, this Tempo pull supplies a matching handle option that can be repeated across a run using the same 2014-2026-P specification.
