Berenson Studio Series 11-5/16" (287 mm) Center to Center Stainless Steel Pull, - 2026-90SS-P
Description
Berenson Studio Stainless Steel Pull For Cabinets
Berenson Studio stainless steel pull identifies this handle as part of Berenson Corporation's Studio collection in stainless steel, so it visually matches other Studio pieces in the same material for consistent cabinet runs. The 11-5/16 inch (287 mm) center to center dimension sets the hole spacing, which allows straightforward layout on wider cabinet doors or large drawers where a longer pull improves grip reach. The stainless steel material provides a solid metal construction, which supports everyday cabinet use in kitchens, baths, or shop storage. The stainless steel finish matches the base material, giving the pull a uniform metallic appearance that coordinates with other stainless details in a project. The overall identity as a decorative handle in the Handles and Pulls category defines its role as the working touch point for opening and closing casework fronts.
Key Stainless Steel Pull Details For Projects
- The 11-7/8 inch length or diameter dimension describes the overall pull span, giving installers a clear sense of visual scale across wider fronts while also leaving finger space at each end for comfortable grasping.
- The 1-7/16 inch projection states how far the pull stands off the cabinet face, creating hand clearance between fingers and door surface, which supports comfortable operation even on thicker door edges.
- The 9/16 inch width defines the grip bar thickness, which influences how the pull feels in hand and how it visually presents as a slim, linear element on modern cabinet faces.
- The 11-5/16 inch center to center dimension repeats the mounting hole spacing, helping layout on new builds or matching existing drilled fronts where this spread is already established.
- The stainless steel material and stainless steel finish work together so the visible surface reflects the same metal throughout the pull body, supporting a consistent look across multiple handles on a project.
Mounting And Fit Details For This Cabinet Pull
The 11-5/16 inch center to center measurement controls where the two mounting points land, so installers can position or drill holes accurately for this specific pull on cabinet doors and drawers. The 1-7/16 inch projection from the face provides working finger clearance, which matters when hands approach from above or below on tall pantry doors or deep drawer fronts. The 9/16 inch width concentrates the pull into a slim bar, which leaves more visible panel surface around the handle on narrow rails. The overall 11-7/8 inch length helps this pull span larger drawer widths, which balances the hardware visually and distributes hand force across a wider area of the front.
How This Berenson Studio Pull Works In Use
Where This Stainless Steel Pull Fits Cabinet Runs
As a decorative handle in the Handles and Pulls, Berenson product class, this Berenson Studio Series pull is intended for cabinet doors and drawers where a modern linear bar is desired. The 11-5/16 inch (287 mm) center to center spacing suits full-size kitchen drawers, pantry doors, or storage cabinets that benefit from a longer gripping surface. The stainless steel material supports use on cabinets in residential or shop environments where metal hardware is a standard choice. The 11-7/8 inch overall length visually anchors wider fronts so the pull does not appear undersized on large faces. The stainless steel finish ties into other stainless details such as appliances, hinges, or exposed metal trim, helping maintain a unified look across a project. The category placement under Decorative Hardware & Moldings signals that this part serves both a functional role and a visible design role on finished casework.
Dimensions That Support Consistent Installation Results
The specified 11-5/16 inch center to center dimension gives installers an exact drilling pattern, which helps repeat hole locations across multiple doors or drawers without re-measuring spacing each time. The 1-7/16 inch projection defines the stand-off distance from the cabinet face, making it easier to coordinate clearance with adjacent doors, reveals, or nearby hardware. The 9/16 inch width keeps the bar slender, which allows closer placement to panel edges while still providing enough surface for secure gripping. The 11-7/8 inch overall length allows hardware layouts that align pulls across cabinet banks, because the same dimension repeats as a reference point along the run. The manufacturer part number 2026-90SS-P identifies this exact combination of Studio collection style, stainless steel material, and dimensions so replacement or additional pulls match existing installations precisely.
Common Questions About The 2026-90SS-P Pull
What are the center to center dimensions on this pull?
The Berenson Studio stainless steel pull has a center to center measurement of 11-5/16 inches, or 287 mm, which sets the exact hole spacing for mounting on cabinet doors or drawers.
How long is the Berenson Studio stainless steel pull overall?
The Studio Series cabinet handle has an overall length of 11-7/8 inches, giving it enough span to suit wider drawers or tall cabinet doors while maintaining proportional appearance.
What is the projection of this stainless steel pull from the cabinet face?
The 2026-90SS-P pull handle projects 1-7/16 inches from the cabinet surface, providing finger clearance for a comfortable grip during everyday use.
How wide is the grip bar on this cabinet pull?
This Berenson cabinet hardware pull has a width of 9/16 inch, creating a slim bar profile that offers a modern look while still giving enough surface to grasp.
What material and finish are used on this Berenson pull?
The Studio Series pull is made from stainless steel and has a stainless steel finish, so the visible surface reflects the same metal character across the full handle.
Which Berenson collection does the 2026-90SS-P pull belong to?
The 2026-90SS-P pull belongs to the Berenson Studio collection, which helps coordinate cabinet hardware choices when using other Studio series pieces on the same project.
Selecting This Studio Pull For Cabinet Projects
The Berenson Studio stainless steel pull with 11-5/16 inch center to center spacing, 11-7/8 inch length, 1-7/16 inch projection, and 9/16 inch width offers a defined set of working dimensions for cabinet work. The stainless steel material and stainless steel finish align this pull with modern cabinet styles where exposed metal hardware is part of the design. For projects needing a longer bar handle in the Handles and Pulls, Berenson class, this specific 2026-90SS-P part number provides a repeatable choice that matches across multiple doors and drawers.