Domino 50mm x 24mm x 10mm Beech Tenon for DF 500 Q describes precisely sized beech tenons designed for use with Domino DF 500 Joiners, so every mortise you cut with the DF 500 has a matching, repeatable fit in the joint. The 50mm length, 24mm width, and 10mm thickness define the joint capacity you can plan around, giving you a clear reference when laying out rails, stiles, and panel connections in interior work. The beech material is intended for interior applications, which aligns these tenons with typical cabinet, furniture, and casework projects in controlled environments. Being part of the biscuits category within fasteners, they act as a solid, floating tenon element in your Domino-based joinery workflow, supporting precise alignment between parts when used with properly sized mortises on the DF 500.
The explicit 50mm x 24mm x 10mm sizing aligns with Domino DF 500 Joiners, so the mortises cut by that tool are matched to these beech tenons for a predictable fit in interior assemblies. Because the tenons belong to the Domino system for DF 500 Joiners, you can rely on the machine settings and stops corresponding to this particular size, allowing repeatable positioning across cabinet parts or frames. Being in the fasteners and biscuits category shows their role as a structural insert rather than surface hardware, so your installation workflow revolves around mortise cutting and dry-fitting rather than surface-mounted connectors.
These Domino Tenons in a variety of sizes for use with Domino DF 500 Joiners, in this case the 50mm x 24mm x 10mm beech size, fit straight into DF 500-based interior joinery tasks such as cabinet carcasses, interior frames, and other indoor assemblies that suit this tenon footprint. Because beech tenons are intended for interior applications, they align with shop environments and finished spaces where temperature and humidity follow normal indoor conditions, supporting long-term use in cabinetry, shelving units, and comparable built-ins. Their classification as biscuits within fasteners means they act as the internal joinery element that bridges two parts, so planning centers on mortise placement rather than external brackets. The defined dimensions also help you choose stock widths and edge margins that accommodate the 24mm by 10mm profile while still leaving adequate material around the mortise in typical interior wood components.
Because these are Domino Tenons for use with Domino DF 500 Joiners, the mortises produced by the DF 500 correspond directly to the 50mm x 24mm x 10mm beech tenon size, which supports consistent joint fit from part to part when you repeat a setting. The beech tenons being intended for interior applications means they are specified for the type of projects most commonly tackled with a DF 500 in shops, such as indoor furniture or cabinets, so your joinery plan matches their expected environment. Since the product is categorized under fasteners and specifically biscuits, it highlights that these tenons function as a repeatable, system-based connection element rather than improvised stock, which reduces layout variation when you standardize on this size. The SAP description DOMINO, BEECH, 10X24X50MM, 85 PACK and product name together define a specific, repeatable configuration that can be recorded in job notes, enabling you to return to the same joinery parameters on future interior builds.
Domino 50mm x 24mm x 10mm Beech Tenon for DF 500 Q is for use with Domino DF 500 Joiners, so its dimensions correspond to mortises cut by that specific tool.
The Domino 50mm x 24mm x 10mm Beech Tenon for DF 500 Q measures 50mm in length, 24mm in width, and 10mm in thickness, defining the joint size you can plan into your interior projects.
Beech tenons are intended for interior applications, aligning them with indoor woodworking such as cabinet, furniture, and other interior joinery executed with the DF 500.
These Domino Tenons in a variety of sizes for use with Domino DF 500 Joiners match the DF 500's mortise dimensions, supporting a system-based approach to interior joinery layout.
The tenons are listed under fasteners in the biscuits product class, indicating they serve as internal joint elements within your Domino-based joinery rather than exposed surface hardware.
Manufacturer part number 494942 identifies this Domino 50mm x 24mm x 10mm Beech Tenon for DF 500 Q, so the same interior joint size can be specified and sourced again for future projects.
Choosing the Domino 50mm x 24mm x 10mm Beech Tenon for DF 500 Q lets you align interior joinery around a clearly defined tenon size that matches Domino DF 500 Joiners. With beech tenons intended for interior applications and categorized as biscuits within fasteners, this product gives you a consistent, system-based joint element for cabinets, furniture, and other indoor assemblies that follow the DF 500 mortise range.
Sold In: 1 Package