Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the screw-on front fixing bracket for Blum's LEGRABOX drawer system, M-height, in a Zinc finish. It attaches the drawer front to the LEGRABOX M-height side profile and carries the adjustment mechanism that lets you dial in the front alignment after installation.
The front fixing bracket is the connection between the LEGRABOX side profile and the drawer front panel. Without it, the front has no anchor to the runner system and no path to adjustment. In the LEGRABOX platform, front fixings are side-height specific: the M-height bracket mounts to M-height profiles only. Swapping in a bracket from a different height code — C, F, or K — will throw off the adjustment range and leave the front misaligned. This screw-on version suits shops and installers who prefer a mechanical fastener over a clip-style attachment, particularly on heavier fronts or in commercial casework where the connection needs to stay put over time.
The bracket is steel with a Zinc finish. Zinc sits in a neutral, low-gloss register that recedes inside the cabinet rather than drawing attention to the hardware. For projects where the interior finish language calls for Zinc — or where the front fixing will be visible through a glass or open-back panel — this finish keeps the look consistent. Installers specifying other LEGRABOX interior colors should confirm that Zinc coordinates with or is concealed by the drawer front and interior components in their build.
Cabinet shops running LEGRABOX M-height systems will reach for this bracket when they need screw-on attachment on a standard (non-push-to-open) drawer. It is also the right call for replacement work: if a front fixing has been damaged or stripped during a renovation, this is the part that restores the front's alignment capability without replacing the full runner set. Designers specifying LEGRABOX in Zinc-finish interiors can call this bracket out by series and height code so the shop orders the correct component on the first pass. Because it is non-handed, one SKU covers both sides of the drawer, which simplifies ordering for a multi-drawer project.
No. This front fixing bracket is engineered for LEGRABOX M-height profiles. It is not compatible with TANDEMBOX, MERIVOBOX, METABOX, or any other Blum platform. Front fixings are system- and height-specific.
The LEGRABOX front fixing system includes front adjustment capability, but the specific adjustment range (height, side, tilt) should be confirmed against Blum's published installation documentation for the M-height series, as ranges can vary by bracket version.
The sold-as unit is not explicitly stated in the product data. Check the quantity listed at purchase — one bracket per drawer side is required, so a complete drawer needs two. Confirm the pack contents before ordering for a multi-drawer project.
This bracket is rated for standard motion — conventional drawer operation without a push-to-open or powered-opening mechanism. Push-to-open and SERVO-DRIVE configurations require brackets specified for those systems.
A drawer front that won't align is one of the most visible problems in a finished cabinet installation. Specifying the M-height screw-on bracket in Zinc ensures the attachment point, the adjustment geometry, and the finish all match the LEGRABOX system you're building — so the gaps come out even and stay that way.
Sold In: 1 Each
