Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is Blum's AMBIA-LINE narrow cross divider for LEGRABOX drawers, a short-span partitioning component that runs side to side across the drawer interior to zone contents front to back. At 93.6mm (4 inches) long and 1-3/4 inches tall, it is sized for compact drawer sections and finishes in Orion Gray Matte to coordinate with the AMBIA-LINE program and LEGRABOX drawer interiors.
In an AMBIA-LINE interior, cross dividers are the components that create front-to-back zoning once the lateral dividers or frames are in place. This narrow version spans a shorter section of the drawer — 93.6mm (4 inches) across — making it the right choice when a compartment is too small for a standard-length cross divider. Think of a cutlery drawer where one zone holds short items like espresso spoons or butter knives, or a spice drawer where a small partition keeps a cluster of jars from shifting. The narrow span clips into the AMBIA-LINE system the same way a full-length cross divider does; the difference is where it lands and how compact a division it creates.
The divider is molded from nylon (polyamide), a material common to Blum AMBIA-LINE components for its consistent fit, smooth surfaces, and dimensional stability. Orion Gray Matte is the standard interior color for AMBIA-LINE, matching the side profiles and inserts in the LEGRABOX program. The finish is uniform across the top edge and faces, so this divider sits flush with other AMBIA-LINE components visually. Material care and cleanability are not specified in the source data for this component.
Cabinet shops specifying LEGRABOX drawer interiors reach for the narrow cross divider when a standard-length piece would span too much of the drawer or when the layout calls for dense, closely spaced compartments in one zone. Kitchen designers use it to tune a LEGRABOX cutlery or utensil drawer layout so every zone is right-sized for what goes in it. Homeowners completing a LEGRABOX renovation can add or reposition this divider later without tools or disassembly, adjusting the interior as kitchen habits change. Because it belongs to the AMBIA-LINE system, it pairs only with other AMBIA-LINE components in LEGRABOX drawers — not with ORGA-LINE (which is the TANDEMBOX organization line) and not with non-Blum drawer systems.
It is a cross divider — it runs across the drawer from side to side, creating front-to-back zones. Lateral dividers run front to back and are separate AMBIA-LINE parts.
The 93.6mm (4 inch) length is shorter than the standard AMBIA-LINE cross divider, so it spans a smaller section of the drawer interior — useful when compartments are tightly laid out or when the drawer section it needs to cross is compact.
The divider itself stands 1-3/4 inches tall. It is part of the AMBIA-LINE system engineered for LEGRABOX, but confirm the divider height clears any drawer above it before specifying in a shallow box configuration.
No. AMBIA-LINE is matched to LEGRABOX. TANDEMBOX drawers use the ORGA-LINE organization line, and the two systems do not interchange.
This cross divider mounts to AMBIA-LINE system components — frames, rails, or lateral dividers already in the drawer. It is not a stand-alone insert that rests on the drawer bottom.
Orion Gray Matte is the color that makes an AMBIA-LINE interior read as one designed system rather than a collection of add-on parts. Specifying the narrow cross divider in this finish keeps the entire LEGRABOX drawer interior consistent, from the side profiles to the smallest divider in the layout.
Sold In: 1 Each
