Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Maple 3/4 inch from States Industries is a domestic veneer core panel that provides a maple hardwood face for cabinet and woodworking projects where a consistent species surface is required. The 3/4 inch thickness creates a sturdy panel for building carcasses, shelving, and structural partitions that needs solid screw-holding and reduced deflection over spans. The veneer core construction gives a wood-based internal structure that works predictably with standard woodworking tools and methods. The 48.5 x 96.5 inch panel size offers a usable sheet that allows trimming on all sides while still yielding full-size cabinet components. The NAUF unfinished construction supplies a raw surface ready for shop sanding and finishing systems without a pre-applied coating, which supports controlled color matching and sheen across a project. The 85 percent white maple designation identifies a light, maple-toned face selection that supports brighter interiors and coordinated maple installations.
The 3/4 inch thickness on this States Industries maple plywood sets a common standard for base and tall cabinet cases, so cutlists and construction methods built around 3/4 inch material remain straightforward. The 48.5 x 96.5 inch sheet size is slightly oversized compared with nominal 4 x 8 dimensions, which leaves material at the edges for squaring panels and trimming to exact cabinet depths and heights. That extra margin supports tight reveals on finished installations because critical parts can be dimensioned after any transport or handling marks are removed. As a veneer core maple panel, it also works well with typical edge-band and solid-wood edge details that rely on a wood core for glue bonding along the sheet edge.
This plywood hardwood maple, white 85 percent, veneer core panel fits projects that call for a maple face with a domestic, NAUF construction. The maple hardwood surface provides a species match for maple-based cabinetry, architectural millwork, and shop-built furniture components where exposed faces remain visible. Because the sheet measures 48.5 x 96.5 inches, it works well for tall cabinet sides, pantry units, and closet partitions that need full-height parts cut from a single panel. The veneer core structure suits applications where installers rely on strong fastener holding into the face or edge, such as hanging wall cabinets or assembling modular casework, and the 3/4 inch build supports these uses without resorting to thicker panels.
The NAUF unfinished construction gives shops control over finishing steps, since the bare maple faces accept stains, clear finishes, or paint systems according to shop standards, which helps keep color runs consistent from job to job. The 85 percent white maple selection means most of the visible surface presents a lighter maple tone, which reduces time spent sorting panels for face uniformity when assembling banks of cabinets or large wall runs. The veneer core make-up behaves predictably under routers, saws, and boring equipment, so adjustable shelf holes, hinge locations, and joinery layouts can be machined without the swelling or crumbling often associated with non-wood cores. The domestic sourcing described for this maple plywood aligns it with many commercial specifications that call out domestic, NAUF panels, which simplifies submittal documentation when projects reference panel type, core, and chemistry by description.
This sheet is described as plywood hardwood maple with an 85 percent white maple face, so it provides a maple hardwood surface suitable for visible cabinet and millwork components.
The States Industries maple plywood has a 3/4 inch thickness, giving a robust panel for cabinet carcasses, shelving, and structural partitions that benefit from added stiffness.
The panel size is 48.5 x 96.5 inches, providing slight oversize dimensions that help with squaring, trimming, and yielding full-height cabinet parts from a single sheet.
The veneer core designation means the internal plies are wood-based, giving predictable machining and fastener holding for joinery, shelf pins, and hardware mounting.
The NAUF unfinished description indicates a No Added Urea Formaldehyde panel with bare maple faces, allowing shops to apply their own finishing systems for color and sheen control.
The 85 percent white maple designation signals a predominantly light-toned maple face, supporting projects that target a bright maple appearance across visible cabinet and panel surfaces.
This States Industries plywood hardwood maple panel combines a 3/4 inch thickness, veneer core construction, and 48.5 x 96.5 inch dimensions, giving shops a domestic NAUF unfinished option for maple-faced cabinetry and millwork. The 85 percent white maple face supports projects calling for a light, consistent maple appearance across visible surfaces. When a job specifies maple veneer core, domestic sourcing, and No Added Urea Formaldehyde, this maple plywood description aligns those requirements into a single sheet choice that fits standard cabinet layouts and familiar shop workflows.
Sold In: 1 Sheet