Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt SCB bottom mount trash pullout is a bottom mount trash pullout built around a single 20 quart platinum bin, so it organizes waste inside a cabinet opening while keeping the container supported on a dedicated slide assembly. The product sits in the Kitchen & Bath Cabinet Accessories and Bottom Mount Trash Pullouts class, which directs it toward cabinetry jobs where a defined pull-out footprint and repeatable hardware layout are important. The SCB15-1-20PT manufacturer part number identifies this specific configuration, so matching that number ties future replacements or repeat installations to the same slide and bin combination. The platinum bin color detail keeps the container visually consistent with platinum schemes, which matters on projects where an open cabinet or pullout occasionally shows the interior. The Knape and Vogt brand backing the SCB FYSCB Series gives installers a defined product family when standardizing on a waste pullout layout across multiple cabinets.
This bottom mount trash pullout uses heavy-duty mounting straps as the primary attachment points, so the frame fastens directly to the cabinet floor instead of the cabinet sides. Installation with only four screws into the heavy-duty mounting straps gives installers a straightforward fastening pattern that ties the assembly down without extra brackets. Full extension ball bearing slides mounted to the frame create a defined slide path, so positioning the pullout square to the cabinet opening helps the bin clear the face while staying aligned with the door. The easy to attach handle connects at the front, so the cabinet user can pull the unit out with a forward grip that ties directly to the slide movement.
The KV FYSCB Series single trash pull-out with soft close targets cabinet spaces that benefit from a dedicated 20 quart bin on a guided slide system, so small to mid-size base cabinets gain a defined waste location behind a door. The 14-3/8 inch reference in the product name points to the general slide length zone, which aligns with typical depths found in standard kitchen and bath base cabinets. As a bottom mount trash pullout, the SCB15-1-20PT rests on the cabinet floor instead of hanging from the sides, which pairs well with frameless or face frame cabinetry where installers want a consistent platform under the bin. The platinum bin color aligns with platinum design schemes inside the cabinet, which helps when the door is open during work in the kitchen or bath.
Heavy duty, full extension ball bearing slides on this Knape and Vogt bottom mount trash pullout carry the waste bin along a controlled path, so the 20 quart bin travels fully out while staying supported under load. The 1 inch over-travel capability pushes the bin slightly beyond the cabinet front, which gives users full access to the bin rim and interior without the door edge interrupting reach. Soft-Close technology at the slides manages the final segment of closure, so the bin eases into position instead of slamming, which supports consistent alignment of the frame, mounting straps, and cabinet fasteners over time. The specialized wire management system that holds bins securely in place keeps the 20 quart platinum bin nested in the frame, so lateral movement is minimized during repeated openings and closings on busy cabinet locations. A defined weight capacity of 30 lb maximum per bin, not to exceed 80 lb of total weight, sets a clear load boundary, so the trash pull-out operates within its design range on both residential and light commercial cabinetry projects.
The Knape and Vogt SCB15-1-20PT is a bottom mount trash pullout, so the frame anchors to the cabinet floor using heavy-duty mounting straps for a stable, grounded installation base.
The soft-close technology in the full extension ball bearing slides slows the final closing movement, so the bin returns smoothly and reduces slamming forces during repeated cabinet use.
The SCB15-1-20PT configuration uses a single 20 quart platinum bin, so it suits waste or recycling stations that need a compact container on a guided pullout frame.
The trash pullout has a weight capacity of 30 lb maximum per bin, not to exceed 80 lb of total weight, so load planning can follow those limits for consistent slide performance.
A specialized wire management system holds bins securely in place, so the 20 quart platinum bin stays seated in the frame while the slides extend and close under load.
The 1 inch over-travel moves the bin slightly beyond the cabinet face, so users gain better access to the bin opening for loading and liner adjustment without the door edge blocking reach.
The KV FYSCB Series single trash pull-out with soft close and a 20 quart platinum bin channels waste into a guided pullout, so a base cabinet gains a predictable, slide-supported waste station. Heavy duty, full extension ball bearing slides with Soft-Close technology and 1 inch over-travel tie the bin to a controlled motion that supports everyday use. With a bottom mount frame on heavy duty mounting straps and a 30 lb maximum per bin rating, this Knape and Vogt SCB15-1-20PT offers a defined option when a project calls for a compact, single-bin waste pullout anchored to the cabinet floor.
Sold In: 1 Each
