Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Maple 3/4 inch from States Industries is a domestic plywood panel built on a veneer core with a hardwood maple face, so it provides a familiar sheet-good feel for cabinet and fixture fabrication. The panel uses a NAUF 1-sided construction, which keeps the no added urea formaldehyde benefit focused on the primary face side typically exposed in finished work. Its 85 percent white maple face gives a light, consistent maple appearance that supports clean, straightforward finishing systems. The 3/4 inch thickness supplies a standard build platform for cabinet boxes, shelving, and similar projects where a sturdy panel is expected. Panel dimensions of 48.5 by 96.5 allow work within 4 by 8 layouts while leaving a small margin that can be trimmed to square edges or to clean up handling marks before machining.
This States Industries plywood uses a veneer core, so it behaves like a traditional plywood sheet during sawing, routing, and boring, which helps maintain predictable chip-out and support at edges. At 3/4 inch thickness, the panel fits many standard cabinet and shelving designs that are already dimensioned around this common sheet size, keeping layout straightforward. The 48.5 by 96.5 inch format leaves extra material beyond nominal 4 by 8 dimensions, which is useful when truing factory edges or aligning to straight-line rip operations. The NAUF 1-sided construction places the no added urea formaldehyde benefit on one primary face, guiding orientation decisions when deciding which side will be visible in finished installations.
This plywood hardwood maple, white 85 percent, is suited to projects that call for a light maple hardwood face from a domestic source, such as cabinet exteriors, casework ends, or built-ins that keep the maple look consistent across a room. The veneer core design supports typical shop operations where sheets are ripped, crosscut, and machined for joinery, so installers and fabricators can plan workflows around standard table saws, panel saws, or routers. Because the panel is 3/4 inch thick, it aligns with many shelf pin systems and cabinet hardware layouts that assume this material thickness, which can streamline drilling patterns and hinge or slide clearances in finished work.
The NAUF 1-sided construction on this States Industries plywood places the no added urea formaldehyde characteristic on one principal face, so orienting that face outward keeps the specified face where it will matter most in visible fields. The 85 percent white maple face color helps maintain uniformity when multiple sheets are used side by side, reducing the amount of color balancing needed across banks of cabinets or wall runs. With a 48.5 by 96.5 inch size, the sheet leaves trimming allowance for squaring and panel sizing, which helps produce clean seams and tight joints when panels meet at corners or along long runs. The veneer core supports mechanical fastening and machining in a way many shops recognize, allowing dadoes, rabbets, and edge treatments to track consistently from sheet to sheet.
This plywood hardwood maple panel has a 3/4 inch thickness, which suits many cabinet, shelving, and casework designs that are already standardized around this common sheet thickness.
The panel measures 48.5 by 96.5 inches, providing a slightly oversized sheet in the 4 by 8 class, which allows trimming to square and clean edges before final sizing.
This States Industries plywood is NAUF 1-sided, meaning the no added urea formaldehyde attribute is applied to one principal face, guiding which side is best oriented outward in finished work.
The 85 percent white maple description indicates a predominantly light maple face color, supporting a consistent maple appearance across visible cabinet sides or fronts in a project.
This States Industries maple panel uses a veneer core, so it behaves like a traditional plywood sheet during cutting and machining, supporting familiar tooling setups and feed rates.
The product is classified as plywood hardwood within board panel products, aligning it with sheet goods commonly used for cabinet, furniture, and interior woodworking projects.
This States Industries plywood hardwood maple panel brings together a veneer core, 3/4 inch thickness, and a white 85 percent maple face, so it fits many cabinet and interior projects built around maple sheet goods. The NAUF 1-sided construction and 48.5 by 96.5 inch size help with face orientation and layout, giving flexibility for trimming, machining, and aligning panels in the shop. When a domestic maple plywood sheet in this class meets the design and finish direction of the job, this panel provides a clearly defined option for work that depends on a consistent, light maple appearance.
Sold In: 1 Sheet
