LED 1.5W Neutral Tape Light, 20' Roll Use

LED 1.5W Neutral Tape Light, 20' Roll is a Tresco Lighting LED tape lighting solution stocked in 20' rolls, so longer cabinet, display, or task runs can be laid out in a single continuous piece with fewer joints to manage. The tape draws 1.5 watts per foot at 12V, which provides usable illumination while helping manage power demand when planning transformers on larger projects. A 3500K neutral tone output keeps light color balanced between warm and cool, which helps maintain consistent appearance across mixed-room installations. The tape is designed as an EQU-TAPE series product, giving installers a defined Tresco part number with L-TPELED-35SER-1 for straightforward spec referencing. Low heat operation supports use in typical woodworking and cabinet environments where heat buildup is a concern around finished materials.

Key LED Tape Lighting Details For Projects

• The tape is stocked in 20' rolls, which lets installers span typical cabinet and counter runs in one length, reducing field splicing and simplifying layout on straight or gently curved surfaces.
• Power draw of 1.5 watts per foot at 12V means each run can be calculated easily against transformer capacity, helping size Tresco transformers accurately for the planned footage.
• A 3500K neutral color temperature produces balanced light output that works across many room finishes, aiding in consistent appearance when paired with other neutral white lighting.
• The tape has a 3M adhesive peel and stick back, allowing it to be pressed directly onto compatible mounting surfaces, which speeds installation on cabinetry, shelving, or similar substrates.
• The tape is rated for an average 25,000 hour life, so once installed it can stay in service for extended periods before replacement is typically needed in standard applications.
• Low heat performance supports placement near cabinets and woodwork, helping protect finished surfaces while the tape provides accent or task lighting in tight spaces.

Installation And Cutting Details For LED Tape

This Tresco Lighting tape uses a 3M adhesive peel and stick back for easy installation, so installers can clean the mounting path and apply the tape in a single pass without separate mechanical fastening along the run. The tape can be cut every 3 inches, which allows sections to be trimmed closely to the actual cabinet or shelf length, reducing dark gaps or waste at the ends. Each cut point can then be interfaced to one of three connector styles - straight feed, t-connector, or right-angle connector - depending on the layout, so runs can follow corners, branches, or power entry points with defined connection hardware. A 20' maximum length is specified for any continuous run, giving a clear upper limit when planning feed points, transformer locations, and where to break longer layouts into multiple circuits.

How This 12V 1.5W LED Tape Fits Workflows

LED Tape Lighting For Cabinets And Runs

This LED tape lighting from Tresco Lighting is part of the LED Tape Lighting product class, positioning it for use along cabinet bases, upper cabinets, display cases, or similar linear applications. Being stocked in 20' rolls supports longer continuous cabinet or shelving lines, so installers can handle many residential or light commercial runs with a single length. A 20' maximum length for a continuous run sets the practical design envelope, guiding where to introduce another feed to stay within the stated limit. The 12V operation is suited to low-voltage lighting layouts typically used in under-cabinet or accent work, which helps integrate this tape with other Tresco fixtures on the same low-voltage system. The specified 3500K neutral light level fits tasks where balanced, non-yellow and non-blue light is desired over work surfaces or displays.

Details That Support Reliable LED Tape Results

The ability to cut the tape every 3 inches gives installers fine control over finished lengths, which reduces awkward overhangs and lets light stop close to the end of a cabinet or niche. Connection to straight feed, t-connector, or right-angle connector components means the same tape type can handle linear runs, branching layouts, and corners, helping maintain uninterrupted light lines through layout changes. Tresco notes that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches, so using the matching Tresco components supports the intended electrical and control performance of this tape. Low heat output works well in tight woodwork cavities, helping preserve finishes in toe-kick areas, crown lighting, or interior cabinet runs where airflow is modest. An average rated life of 25,000 hours means this tape is built for extended service intervals in typical usage, limiting the frequency of rework once it is installed and connected as part of a Tresco system.

Common Questions About This Tresco Tape Light

Selecting This 20 Foot Neutral Tape Light

The LED 1.5W Neutral Tape Light, 20' Roll from Tresco Lighting combines 1.5 watts per foot at 12V, a 3500K neutral output, and a 20' maximum continuous run, giving installers clear electrical and layout parameters. With a 3M adhesive peel and stick back, cut points every 3 inches, and connector options for straight, t, and right-angle transitions, the tape adapts to many cabinet and display geometries. Pairing this L-TPELED-35SER-1 tape with genuine Tresco transformers, power cables, connecting cables, and switches aligns the tape with its intended low-voltage system design for consistent field results.