LED 1.5W Daylight Tape Light For Continuous Runs

LED 1.5W Daylight Tape Light gives you a 20 foot roll of 12V LED tape at 1.5 watts per foot, so you get consistent illumination over long cabinet, shelving, or display runs while keeping power use predictable along the entire length.

The tape is part of Tresco Lighting LED tape lighting, which means it is designed as a dedicated tape lighting solution for woodworking and interior projects where low-profile linear light is needed along edges or recesses.

The daylight color at 6500K produces a bright, cool tone that highlights details on work surfaces and displays, which is useful in shops, kitchens, and commercial casework that benefit from crisp, high-contrast lighting.

The 20 foot maximum length for a continuous run matches the stocked roll length, so planning straight runs is straightforward without having to account for intermediate power feeds along that distance.

An average rated life of 25,000 hours means the tape delivers many hours of operation before replacement, which helps reduce time spent reopening millwork or fixtures to change lighting components.

Key LED Tape Details That Help Installation

• The 20 foot roll format provides a single, long tape section, which simplifies laying out extended runs along cabinet stretches or toe-kicks without frequent joints.
• The 12V rating defines the low-voltage requirement, which lets you plan power supplies and routing of low-voltage wiring within your project layout.
• Power consumption of 1.5 watts per foot lets you calculate total load for the full 20 foot run, so you can size Tresco transformers appropriately for the installation.
• The 6500K daylight output delivers a cool, bright appearance, which is useful where strong task or display lighting is preferred over warm accent light.
• The tape can be cut every 3 inches, so you can trim to more exact lengths and fit inside specific cabinet bays or recesses with minimal wasted strip.
• 3M adhesive peel and stick backing provides a fixed mounting method along clean surfaces, saving fabrication time for brackets or channels in many basic installs.

Mounting And Connecting This Tresco LED Tape

The tape can be cut every 3 inches, and each cut point allows you to size sections that follow your cabinet or shelving layout closely, which helps the light stop and start where your finished edges actually fall.

The cut tape can be inserted into any one of three connector types - straight feed, t-connector, or right-angle connector - so you can turn corners, branch runs, or feed from one end without splicing, supporting cleaner wiring paths.

The 20 foot maximum length for a continuous run defines how far you can link segments on one power feed, which helps you organize runs into manageable circuits that stay within the product's designed operating parameters.

Link cords are available in 2 inch, 6 inch, 10 inch, 24 inch, 48 inch, and 72 inch lengths (sold separately), giving options to bridge gaps between tape sections across breaks, hinges, or transitions in your casework layout.

Using LED 1.5W Daylight Tape Light In Projects

Where This 20 Foot LED Tape Roll Fits Best

The LED 1.5W Daylight Tape Light 20 foot roll suits applications that need a single, continuous low-profile light line, such as under-cabinet runs, long shelves, or continuous display edges that follow the full length of the millwork.

The Tresco Lighting LED tape lighting category positioning indicates it is intended as tape lighting within woodworking and interior installations, so it aligns naturally with shop-built cabinets, fixtures, and architectural details.

The daylight 6500K output creates a bright, cool appearance that brings out contrast on white or light-colored surfaces, which is useful for task areas and retail displays where product visibility takes priority.

The 12V low-voltage design means all power distribution on the tape side of the transformer is at a lower voltage, which fits typical low-voltage lighting layouts common in custom cabinet and furniture work.

The 20 foot roll simplifies layout for long, straight base or upper cabinet sections, since the stocked length matches the maximum continuous run, helping you assign one roll per run when the design falls within that length.

Details That Support Clean Layouts And Reliable Runs

The ability to cut the tape every 3 inches lets you match the lit length closely to cabinet bays or open shelf spans, which helps avoid dark gaps or overhanging light beyond the finished edges.

Insertion into straight feed, t-connector, or right-angle connector provides defined ways to continue or branch runs, so you can plan consistent corners and junctions instead of field-fabricating connections.

The specified 20 foot maximum length for a continuous run establishes a clear limit for how many feet you connect in series, which supports even performance along the tape and simplifies run-by-run planning.

Link cords in six lengths - 2 inch, 6 inch, 10 inch, 24 inch, 48 inch, and 72 inch (sold separately) - allow you to jump gaps between cabinets, cross structural breaks, or move around obstacles while keeping the lit sections aligned.

The average rated life of 25,000 hours means once the tape is installed behind trim or within channels, it is intended to operate for extended periods before aging out, which is beneficial when the lighting is integrated into built-ins.

The Tresco note stating that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches indicates the tape is part of a coordinated system, which supports predictable performance when paired within that system.

Common Questions About This Tresco LED Tape

Selecting This LED Tape For Your Next Run

The LED 1.5W Daylight Tape Light 20 foot roll gives you a defined 12V, 1.5 watt per foot solution with 6500K daylight output, which is useful when you need bright, continuous linear light along cabinets or displays.

The ability to cut every 3 inches and connect through straight feed, t-connector, or right-angle connector options allows layouts that follow your casework while staying within the product's designed connection system.

The 20 foot maximum continuous run and 25,000 hour average rated life make this tape a practical choice when planning long, low-profile lighting runs that will stay in place for extended service.