LED 3W Warm White Tape Light For Cabinets

LED 3W warm white tape light from Tresco Lighting delivers a 16.4 foot roll of continuous LED illumination that suits extended cabinet, shelving, or display runs where even light is needed along the full length. The tape operates at 12V using 3 watts per foot, so each section provides consistent output while supporting straightforward low-voltage layouts on jobs that follow similar power standards. A 2700K warm white color tone keeps the light in a warm range that matches typical residential or hospitality millwork where softer color is preferred. The tape is stocked in 16.4 foot rolls, giving installers a predictable length for planning runs, power feeds, and connector locations across similar projects. This LED tape has an average rated life of 25,000 hours, supporting long-term use in built-in applications where access after installation is limited.

Key Tape Light Details For Real-World Jobs

• The 16.4 foot roll format lets you span long cabinet or display sections in a single continuous run, reducing connection points across the installation.
• Power usage of 3 watts per foot at 12V helps with transformer sizing and load planning, so runs can be laid out around known electrical demands.
• The 2700K warm white color provides a softer tone that aligns with typical warm interiors, supporting consistent appearance across multiple fixtures.
• Average rated life of 25,000 hours supports long-term use in fixed millwork where replacing concealed lighting would disrupt finished work.
• Low heat output helps keep temperatures down in enclosed cabinet or display areas, which supports sensitive surfaces near the tape.

Mounting And Cutting Details For Installation

This LED tape uses a 3M adhesive peel and stick back, which allows the tape to be pressed directly to prepared mounting surfaces during installation without separate mounting tracks. The tape can be cut every 3 inches, so lengths can be tailored closely to cabinet bays, shelves, or display sections while still maintaining workable connection points. A 16.4 foot maximum length for a continuous run defines the upper limit for a single powered line, allowing planning of where to start and end power feeds and when to break a line into additional runs. These details give installers defined intervals for cutting, sticking, and powering the tape on repeat jobs.

Using This Tresco LED Tape Light In Projects

Where This LED 3W Warm White Tape Light Fits

This LED 3W warm white tape light is part of Tresco Lighting LED tape lighting, so it suits applications where a slim, linear source is needed along a surface rather than from a point fixture. The 16.4 foot roll format supports long cabinet runs, toe kicks, shelving, or display cases where continuous light along the edge or back is more effective than spaced spots. With 2700K warm white output, the tape fits projects that favor warm-toned illumination such as residential kitchens, built-ins, or hospitality millwork. The low heat output means the tape can operate in typical cabinet or display cavities without adding substantial thermal load to nearby materials. Because the tape is cuttable every 3 inches, it can be sized to match various cabinet module widths, allowing the same product to be used across different casework dimensions.

Details That Support Repeatable Tape Light Results

The 3M adhesive peel and stick back provides a consistent mounting method along the entire 16.4 foot roll, so each installation can follow the same press-on workflow without separate clips, supporting repeatable labor steps. The 12V rating and 3 watts per foot consumption give clear electrical parameters, which helps with planning transformer selection and run lengths on multiple similar jobs. A 16.4 foot maximum continuous run length sets a defined limit, so installers can standardize on run segmentation and feeding points from one project to the next. The tape can be cut every 3 inches and then inserted into straight feed, T-connector, or right-angle connector options, which lets installers adapt to corners, branches, or directional changes while maintaining the same tape type. Link cords are available in 2, 6, 10, 24, 48, and 72 inch lengths and are sold separately, so gaps between lit sections or around obstacles can be bridged using measured cord spans instead of excess tape. Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches, so pairing this tape with Tresco components keeps the system within the intended operating combination.

Common Questions About This Tresco Tape Light

Selecting This LED Tape Light For Your Project

The LED 3W warm white tape light from Tresco Lighting offers a 16.4 foot roll, 12V operation, and 3 watts per foot power use, giving clear parameters for planning low-voltage cabinet or display lighting runs. With 2700K warm white output, 25,000 hour average rated life, and low heat, it supports long-term use in warm-toned interiors and enclosed millwork. The 3M adhesive peel and stick back, 3 inch cut intervals, and 16.4 foot maximum continuous run help standardize your layout and installation approach. For projects built around Tresco fixtures, transformers, power cables, connecting cables, and switches, this tape light fits into a coordinated LED tape lighting system.