LED 3W Cool White Tape Light For Runs

LED 3W Cool White Tape Light from Tresco Lighting is a 16.4 foot LED tape lighting roll designed for projects that need a continuous, even light source along cabinets, displays, or work areas. The tape operates at 12V with 3 watts per foot, which delivers predictable power consumption per run so layouts can be planned around available capacity. Its 4800K cool white color provides a neutral, bright tone that suits task areas where clear visibility matters. This tape is stocked in 16.4 foot rolls, giving installers a repeatable length that matches the listed maximum for a continuous run. The product is classified as LED tape lighting, so it works well in linear applications where a low-profile light line is needed. The manufacturer part number L-TPELED-48HER-1 identifies this exact configuration for reorders or matching to plans and cut sheets.

Key LED 3W Cool White Tape Light Advantages

• The tape is stocked in 16.4 foot rolls, which simplifies planning for standard cabinet or display runs and keeps each circuit aligned with the rated continuous length.
• Power draw of 3 watts per foot gives a clear load figure, helping electricians and installers size 12V systems and transformers accurately for each run.
• The 4800K cool white output produces a bright, clean tone that supports task lighting where color clarity and visibility are important.
• 3M adhesive peel and stick backing allows the tape to be pressed directly onto a prepared surface, speeding installation along straight or gently curved substrates.
• An average rated life of 25,000 hours supports long service intervals, so installations in cabinets or fixtures stay in place without frequent changeout.
• The tape generates low heat, which helps when placing lighting near wood, laminates, or other heat-sensitive surfaces in typical woodworking projects.

Installation Details For 16.4 Foot Tape Runs

This Tresco LED 3W Cool White Tape Light uses a 3M adhesive peel and stick back, so the installer positions the tape and presses it into place along the mounting surface. The tape can be cut every 3 inches, which allows lengths to be tailored closely to cabinet or shelf dimensions while still using the intended cut points. A 16.4 foot maximum length for a continuous run matches the stocked roll length, so one roll can be used as a single run without extending beyond the rated limit. The tape is designed to work with genuine Tresco transformers, power cables, connecting cables, and switches, which aligns electrical and control components to the fixture design.

Using Tresco LED Tape Lighting In Real Projects

Where This 16.4 Foot LED Tape Works Best

This LED 3W Cool White Tape Light is part of Tresco LED tape lighting, which suits linear cabinet, display, or shelving applications needing an unobtrusive light strip. The 16.4 foot roll length pairs well with long upper cabinets or continuous shelving, providing a single, unbroken light run up to the 16.4 foot maximum. Because the tape can be cut every 3 inches, installers can match common cabinet module sizes and toe-kick segments while staying within the designed cut intervals. The low heat output supports use in enclosed millwork or tight reveals where heat buildup would be a concern. Its 4800K cool white tone serves in work zones, retail displays, or shop areas where a neutral but bright color temperature is preferred for visibility.

Details That Support Reliable Tape Light Results

The 3 watts per foot rating on this tape allows precise load calculations, which helps size 12V supply components and maintain performance along the run. A 16.4 foot maximum continuous length simplifies layout because one stocked roll equals one rated run, reducing guesswork about how far a single feed can carry. The tape accepts three connector styles - straight feed, t-connector, or right-angle connector - so transitions at corners or branches can match the fixture layout while keeping connections within the intended system. Link cords are available in 2, 6, 10, 24, 48, and 72 inch lengths (sold separately), providing spacing options between tape segments where breaks in the light line are needed. The recommendation to use Tresco accessories, along with Tresco transformers, power cables, connecting cables, and switches, aligns every connection and control point with the fixture design so the lighting system operates as intended over its 25,000 hour average rated life.

LED Tape Light Application And Fit Questions

Selecting This 4800K Tape Light For Your Run

This LED 3W Cool White Tape Light from Tresco Lighting combines a 16.4 foot roll length, 3 watts per foot power draw, and 4800K cool white output for linear lighting in cabinets, shelving, or displays. Cut points every 3 inches, low heat operation, and a 25,000 hour average rated life support projects that need clean lines of light and long service. For jobs requiring 12V LED tape lighting built around Tresco transformers, power cables, connecting cables, and switches, this L-TPELED-48HER-1 roll offers a defined, repeatable solution.