LED 3W Daylight Tape Light For Projects

LED 3W Daylight Tape Light delivers a 16.4 foot roll of 12V, 3 watt per foot LED tape that provides consistent daylight illumination across long cabinet, shelving, or display runs, helping create even task or accent lighting. The tape uses 6500K daylight color, which gives a bright, cool appearance that can highlight work surfaces or product displays where clear visibility is important. The roll is stocked in this 16.4 foot length, so installers can plan continuous runs up to that length without dealing with mixed segments. This LED tape is part of Tresco Lighting, so it aligns with Tresco transformers, power cables, connecting cables, and switches identified for this system. Average rated life of 25,000 hours keeps maintenance intervals long in typical residential or light commercial use. Low heat output supports use in tight millwork spaces where excess heat could affect surrounding materials.

Key LED Daylight Tape Details For Installers

• The tape is rated at 3 watts per foot, which helps electricians and cabinet installers size 12V power supplies accurately and group runs so they stay within transformer load limits on multi-section projects.
• The 16.4 foot roll format allows a continuous run up to 16.4 feet, so linear lighting under cabinets or along shelves can stay visually consistent without breaks in light output along that single circuit.
• The tape can be cut every 3 inches, giving flexibility to fit custom cabinet bays, niches, or shorter runs while minimizing waste and keeping cut points predictable during layout.
• 3M adhesive peel and stick backing provides a simple mounting method onto clean, suitable surfaces, which speeds installation in cabinetry or displays and reduces reliance on separate mounting channels.
• Average rated life of 25,000 hours provides long service in typical on-off cycles, which is useful for shops or residential spaces that expect steady operation with limited relamping downtime.
• Low heat output supports mounting in enclosed or tight woodworking installations where higher temperature lighting could be a concern for substrates or nearby finishes.

LED Tape Mounting And Connection Approach

This Tresco Lighting LED tape operates on 12V and 3 watts per foot, so runs can be planned from the transformer outward and kept within electrical limits while maintaining 16.4 feet as the maximum continuous run. The tape features 3M adhesive peel and stick back, which allows direct mounting to suitable cabinet, fixture, or display surfaces without separate clips, helping keep the tape flat for clean light lines. The ability to cut the tape every 3 inches gives installers defined points for trimming to fit cabinet bays, toe kicks, or display shelves while keeping connector locations consistent. The tape can be inserted into straight feed, t-connector, or right-angle connector options, so layout can follow inside corners, branch to multiple directions, or continue straight runs as needed.

Using This Tresco LED Tape In Real Projects

Where This LED 3W Daylight Tape Fits Best

This LED 3W Daylight Tape Light is stocked in a 16.4 foot roll, which suits continuous under-cabinet, cove, or display lighting where a single run up to that length is wanted on one circuit. The 6500K daylight color works well where a cooler appearance is preferred, such as highlighting product shelving, workshop benches, or contemporary kitchen details. With 3 watts per foot on a 12V system, this tape offers defined power density, allowing planners to match transformer capacity to the exact linear footage on a job. The tape can be cut every 3 inches, so it adapts to staggered cabinet widths or shorter sections without forcing large unused offcuts, which supports efficient material use during layout. Low heat performance makes this tape suitable for tight millwork cavities or close-to-surface applications where limiting temperature rise around wood or laminates is valuable.

Details That Support Clean LED Tape Results

The 3M adhesive peel and stick back provides a uniform mounting method, helping the tape stay flat along cabinet undersides or channels, which contributes to a more even light pattern without sags. The 16.4 foot maximum length for a continuous run sets a clear design boundary, so longer applications can be planned as multiple powered runs rather than overstretching a single feed. Connection flexibility is built in, as the tape can be inserted into straight feed, t-connector, or right-angle connector types, allowing installers to turn corners, split into branches, or connect around obstacles while keeping the light line continuous. Link cords are available in 2, 6, 10, 24, 48, and 72 inch lengths (sold separately), which lets runs bridge gaps, cross cabinet voids, or hop between sections while preserving a single visual lighting zone. As part of the Tresco system, this tape is designed to operate with genuine Tresco transformers, power cables, connecting cables, and switches, which supports electrical and control compatibility across the lighting layout.

Common Questions About This LED Tape Roll

Choose This LED Tape For Defined Linear Runs

LED 3W Daylight Tape Light from Tresco Lighting offers a 16.4 foot, 12V, 3 watt per foot tape with 6500K daylight output, 3M adhesive backing, and 3 inch cut points, giving cabinet and display installers a clear, system-based option for planned continuous runs. At Wurth Baer Supply, this Tresco Lighting LED tape sits within a broader selection for woodworking and cabinet projects, so it can be specified alongside other components on the same job.