FlexTape LED 4.4W Warm White Tape Light

FlexTape LED 4.4W Warm White Tape Light, 156 inch Roll from Tresco Lighting is a 13 foot LED tape lighting run rated at 4.4 Watts per foot, which delivers substantial output in a compact format for cabinets, shelves, and other linear applications where continuous illumination across the full length is important. The tape operates at 12V, so it fits low-voltage lighting layouts where transformers and controls are already set for 12V systems. Its warm white 2700K color temperature provides a soft, warm-toned light that supports residential and commercial spaces needing warmer ambient or task lighting. As an LED solution in the LED Tape Lighting class, it offers an average rated life of 25,000 hours, which reduces change-out frequency on built-in or hard-to-reach runs. The tape is stocked on a single 156 inch roll, so longer straight sections can be laid out with consistent light color and wattage from end to end.

Warm White FlexTape Details That Support Workflow

• The 13 foot roll length allows a single continuous tape segment over long cabinet runs, which reduces cut points and helps maintain uniform light distribution along counters or displays.
• The 4.4 Watts per foot rating clearly defines load for each segment, which simplifies transformer sizing and circuit planning when multiple Tresco fixtures share a low-voltage system.
• The 12V design keeps the tape within a common low-voltage standard, which supports integration with existing 12V Tresco transformers, power cables, connecting cables, and switches.
• The 2700K warm white light output creates a warmer tone, which suits residential kitchens, hospitality millwork, or display areas needing softer visual appearance.
• The average rated life of 25,000 hours reduces the frequency of fixture replacement, which is valuable for permanent millwork or installations where future access to the tape is limited.
• The low heat characteristic of the tape matters in enclosed cavities, since reduced heat output supports use near finished wood, laminates, and other temperature-sensitive surfaces.

Installation-Oriented Details For FlexTape LED Runs

This Tresco Lighting FlexTape LED tape uses a 3M adhesive peel and stick back for easy installation, which allows the installer to bond the tape directly to clean mounting surfaces along cabinets, shelving, or coves without additional clips. The tape can be cut every 3 inches, providing repeatable cut points that help match tape length to cabinet sections, corner breaks, or partitioned runs. Up to 20 feet maximum length is supported for a continuous run, so multiple rolls can be configured within that continuous length limit to maintain performance along extended layouts. The tape is designed to work with Tresco transformers, power cables, connecting cables, and switches, so the low-voltage path from power input through the tape can remain within a single coordinated Tresco system.

Using This 13 Foot Tresco FlexTape In Projects

Where This FlexTape LED 4.4W Warm White Tape Light Fits

This FlexTape LED 4.4W Warm White Tape Light, 156 inch Roll is stocked in 13 foot rolls, which suits continuous under-cabinet strips, toe-kick runs, or shelf lighting where long, uninterrupted lines of light are desired. Being part of the LED Tape Lighting category, it is well suited to linear millwork installations rather than point-source spots, allowing even illumination along wood, laminate, or solid-surface edges. The warm white 2700K color temperature helps this tape fit spaces where a warmer tone is preferred over cooler whites, such as residential kitchens or lounge areas. Because the tape is rated at 4.4 Watts per foot, it supports applications where higher light output per foot is useful, such as task lighting across countertops or work surfaces. With low heat noted in the description, the tape works in close proximity to cabinetry finishes where excessive temperature is not desirable. Altogether, these traits position the tape as a practical choice for many woodworking-based lighting layouts handled by professional installers and serious DIY users.

Details That Support Consistent Layouts And Reduced Rework

The ability to cut the tape every 3 inches means each cut falls at a defined increment, which simplifies planning of section lengths so that terminations align with cabinet divisions and prevent waste from arbitrary cut locations. The 20 foot maximum length for a continuous run provides a firm upper limit when laying out long lines, which helps prevent overextending a single power feed and supports repeatable performance across different projects. The tape can be easily inserted into any one of three connectors - straight feed, T-connector, or right-angle connector - depending on the installation, so runs can transition through corners, branch into multiple directions, or continue straight without splicing methods outside the Tresco system. Link cords are available in 2 inch, 6 inch, 10 inch, 24 inch, 48 inch, and 72 inch lengths, which adds flexibility when bridging gaps between tape sections or crossing non-lit areas using factory-matched connections. Tresco states it is recommended to use Tresco accessories with Tresco fixtures and that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches, which underscores that the tape is engineered as part of a coordinated low-voltage ecosystem that supports consistent operation across multiple linked components. With an average rated life of 25,000 hours, once a layout is built around these connectors and link cords, the long service expectation reduces the likelihood of early fixture replacement interrupting an established lighting system.

Practical Questions About This Tresco FlexTape Roll

Selecting This 13 Foot 2700K FlexTape Roll

The FlexTape LED 4.4W Warm White Tape Light, 156 inch Roll from Tresco Lighting combines a 13 foot length, 4.4 Watts per foot, and 12V operation with 2700K warm white output, which suits many cabinet and millwork lighting layouts. The cut-every-3-inch design, 20 foot maximum continuous run, and available connectors and link cords provide structure for planning clean, repeatable runs across multiple projects. For projects handled through Wurth Baer Supply, this Tresco FlexTape roll offers a defined, low-voltage LED tape lighting option that fits linear applications where warm tone, manageable power planning, and coordinated Tresco system components are priorities.