FlexTape LED Cool White Tape Light For Runs

FlexTape LED 4.4W Cool White Tape Light delivers linear lighting on a 13 foot roll that suits long cabinet, display, or task runs where a low profile light source is needed. The tape operates at 4.4 watts per foot, providing consistent output along the roll while supporting layouts that need predictable power loading per foot. The 4800K cool white color tone keeps light appearance on the cooler side, matching work areas or display applications that benefit from crisp, neutral illumination. This tape is classified as LED tape lighting, so it fits projects that already use this style of strip. The product is from Tresco Lighting, giving installers a defined fixture line to match with compatible components in the same family.

Key FlexTape LED Details For Project Planning

• The 13 foot roll length lets installers span extended cabinet or shelving sections in one continuous product, simplifying layout where a single source is preferred across a longer run.
• The 4.4 watts per foot rating ties electrical load directly to length, which helps when sizing 12V systems and planning transformer capacity for each lighting zone.
• The 12V designation matches low-voltage setups that are common in cabinet and furniture lighting, supporting integration into existing 12V Tresco systems or new dedicated circuits.
• The tape can be cut every 3 inches, giving flexibility to stop precisely near cabinet edges or dividers and reduce dark gaps at the ends of the runs.
• The tape is stocked in rolls, which supports repeatable project planning when multiple identical 13 foot runs or partial lengths are required across several installations.

Mounting FlexTape LED Using Peel And Stick Back

The tape uses a 3M adhesive peel and stick back, so installation is handled by pressing the LED strip onto a prepared mounting surface rather than relying on separate clips. This backing allows the installer to set alignment gradually along the run, which is useful when working under cabinets, inside cases, or along curves where direct placement control matters. Low heat output from the tape supports this adhesive-backed design by reducing thermal stress at the mounting interface during normal operation.

Using FlexTape LED Tape Light In Real Projects

Where This 13 Foot FlexTape Roll Fits Best

This FlexTape LED 4.4W Cool White Tape Light works well anywhere a 13 foot low-profile strip helps provide continuous lighting, such as lengthy cabinet toe-kicks, upper cabinet undersides, or display shelving runs that match this scale. The 12V rating ties into low-voltage lighting circuits, so it fits installations designed around 12V Tresco transformers, power cables, connecting cables, and switches. Because the tape can be cut every 3 inches, it adapts to cabinet segments, staggered shelves, or shorter nooks without leaving long unused tails, giving a neater termination point. The cool white 4800K output supports areas where a cooler color is preferred, such as work surfaces or merchandise displays that benefit from clean, neutral light.

Details That Help Consistent Layouts And Runs

The 20 foot maximum length for a continuous run sets a clear upper limit, so designers can plan whether a single run stays within that length or needs to be broken into multiple feeds. Link cords are available in 2, 6, 10, 24, 48, and 72 inch lengths (sold separately), so segments of tape can be tied around corners or cabinet breaks while keeping each run within the 20 foot guideline. The tape can be inserted into any one of three connector types - straight feed, t-connector, or right-angle connector - which gives routing choices for linear, branching, or corner changes during installation. An average rated life of 25,000 hours supports long-term use in regularly used spaces, reducing the frequency of fixture replacement once installed. Low heat operation further supports longevity in enclosed millwork scenarios by limiting thermal impact on nearby surfaces and finishes over time.

Common FlexTape LED Cool White Tape Light Questions

Selecting This 13 Foot FlexTape LED For Your Layout

This FlexTape LED 4.4W Cool White Tape Light from Tresco Lighting offers a 13 foot, 12V tape with 4.4 watts per foot, 4800K output, and peel and stick 3M adhesive backing. With cut points every 3 inches, the ability to use straight feed, t-connector, or right-angle connector options, and a 20 foot maximum continuous run, it supports practical cabinet, display, and millwork lighting layouts. For projects built around Tresco transformers, power cables, connecting cables, and switches, this tape provides a defined, coordinated LED tape lighting choice ready for detailed planning.