Berenson Swagger Series 5-1/16" (128 mm) Center to Center Polished Chrome Pull, - 2313-1026-P

Berenson Swagger Pull For Cabinet Projects

Berenson Swagger pull 128mm center to center describes a cabinet handle designed around a 5-1/16 inch center to center dimension, which sets consistent hole spacing for new layouts or precise replacement on existing doors and drawers. The pull has a total length of 5-1/2 inches, so it spans slightly beyond the mounting holes for a balanced look and sufficient hand contact. A projection of 1-1/4 inches spaces the grip off the front of the cabinet, giving fingers room to pull without rubbing the door or drawer face. The 5/8 inch width provides a solid gripping surface while staying narrow enough for use on face frames, narrow rails, or smaller drawer fronts. The polished chrome finish creates a bright, reflective surface that stands out against most cabinet finishes. Zinc construction provides a sturdy base material for the pull body.

Key Swagger Series Pull Details For Planning

• The 5-1/16 inch center to center dimension sets the drilling distance between mounting points, which supports consistent layouts across cabinet runs and straightforward replacement where this spacing already exists.
• The overall 5-1/2 inch length positions the pull so there is some overhang beyond each screw hole, which helps visually center the pull on wider rails and offers more area for hands to contact.
• The 1-1/4 inch projection holds the gripping surface off the cabinet face, which helps fingers wrap behind the pull and reduces contact with finished surfaces during regular use.
• The 5/8 inch width concentrates the grip into a defined band, which can help keep the pull visually proportional on smaller door and drawer fronts while still giving enough surface for a firm grasp.
• The polished chrome finish creates a smooth, reflective exterior, which pairs well with other chrome decorative hardware in the same space so projects can follow one finish across multiple components.
• The zinc material used for the pull body provides a metal base, which supports normal cabinet opening and closing duties in residential or light commercial environments.

Mounting Dimensions And Fit For Installation

The 128 mm center to center spacing on this Berenson Swagger pull dictates where to drill mounting holes, so layouts can be planned around a metric or 5-1/16 inch pattern depending on the shop workflow. With a 5-1/2 inch overall length, the pull slightly exceeds the hole spread, which allows installers to align the pull visually with stiles or drawer edges while still landing the fasteners in the correct position. The 1-1/4 inch projection is set to bring the grip out from the door or drawer face, which helps when mounting on doors with applied fronts or thicker decorative panels. A 5/8 inch width shapes the pull into a compact profile that works on narrow rails without overhanging edges. The polished chrome finish matches other polished chrome decorative hardware, which is useful when coordinating multiple handle sizes from the same area.

Using This Polished Chrome Pull In Cabinet Work

Where The Berenson Swagger Pull Fits Best

The Berenson Swagger Series 5-1/16 inch center to center polished chrome pull is designed as a handle for cabinets and similar casework, so it suits doors and drawers that follow the same 128 mm mounting pattern. Its 5-1/2 inch total length works well on medium-width doors and typical drawer fronts, where a pull of this size gives enough leverage without dominating the face. The 5/8 inch width keeps the profile narrow, which fits smaller bathroom vanities, utility cabinets, or tight kitchen layouts where rail height is limited. A 1-1/4 inch projection provides enough clearance from the front, which is helpful on doors with thicker edges or decorative profiles that extend outward. The polished chrome finish aligns with projects that already use chrome decorative hardware, tying together hinges, knobs, and pulls under one finish family.

Dimensional Details That Support Consistent Results

The 128 mm center to center measurement on this cabinet handle establishes a repeatable drilling reference, which simplifies layout work when running multiple doors or drawers in a line. Because 128 mm corresponds closely to 5-1/16 inches, it bridges metric and imperial workflows, which can be useful in mixed-measure shops. The 5-1/2 inch overall length gives a predictable amount of material beyond each screw location, which helps when aligning pulls visually with door rails or drawer edges across a bank of cabinets. With 1-1/4 inches of projection, the pull stands off the face enough for a comfortable grip, which supports users who prefer more finger clearance on thicker fronts. The 5/8 inch width keeps the handle compact, which matters when aligning multiple pulls on smaller drawer stacks or narrow doors. The polished chrome finish on zinc creates a unified visual surface, which supports clean lines when several pulls are installed in sequence on the same run.

Common Questions About This Swagger Series Pull

Selecting This Swagger Pull For Your Next Job

The Berenson Swagger Series 128 mm center to center polished chrome pull pairs a defined 5-1/16 inch hole spacing with a 5-1/2 inch overall length, giving cabinet projects a clear drilling reference and a balanced handle size. Its 1-1/4 inch projection and 5/8 inch width shape how the pull feels in hand and how it sits on doors and drawers. The combination of zinc material and polished chrome finish ties performance and appearance together under one part number. For work that calls for a 128 mm pattern in polished chrome, this pull offers a clearly defined option ready to be specified into layouts.