Berenson Swagger Series 6-5/16" (160 mm) Center to Center Black Nickel Pull, - 2317-1098-P

Berenson Swagger Black Nickel Pull For Cabinets

Berenson Swagger black nickel pull is a cabinet handle from the Swagger Collection that uses a 6-5/16 inch (160 mm) center to center hole spacing, which fits layouts drilled on this standard, so existing cabinet bores align without reworking. The pull uses zinc construction, which provides a solid metal body, so the handle feels substantial when operating doors and drawers. A black nickel finish covers the pull, which gives a dark metallic look that coordinates with black nickel hardware in the same space. The handle length is 6-3/4 inches, which gives extra gripping area beyond the drilled span, so fingers clear the cabinet face more easily. Projection of 1-1/4 inches sets the handle away from the front, which creates room for a full hand behind the pull during everyday use. A width of 5/8 inch gives a comfortable gripping surface while keeping the profile visually streamlined on cabinet fronts.

Key Swagger Pull Details That Help On The Job

• The 6-5/16 inch (160 mm) center to center sizing matches common drilling patterns, so handles line up consistently across cabinet runs during installation.
• The 6-3/4 inch overall length gives a little extra bar beyond the mounting points, so hands have more leverage when pulling heavier drawers or wider doors.
• The 1-1/4 inch projection holds the pull off the face of the cabinet, so fingers and knuckles stay clear of the door surface during repeated openings.
• The 5/8 inch width creates a defined grasp area, so users get a stable hold even on taller pantry doors or deep drawer fronts.
• The zinc material forms the structure of the pull, so the hardware maintains a metal feel that matches other zinc-based cabinet components.
• The black nickel finish covers visible surfaces, so the pull visually coordinates with other black nickel decorative hardware in the room.

Mounting Fit And Center To Center Layout

This Swagger Series pull is designed around a 6-5/16 inch center to center dimension, which sets the distance between mounting points, so cabinet doors and drawers drilled at 160 mm can use this handle without altering hole placement. The pull reaches a 6-3/4 inch total length, which slightly overhangs the drilled span, so the hardware visually bridges the bore pattern for a finished look across modern or traditional fronts. With a 1-1/4 inch projection, the handle stands off the cabinet surface at a consistent depth, so lines of pulls remain even along a bank of doors. The 5/8 inch width balances front surface coverage with a slim appearance, so the pull reads as substantial without overpowering the cabinet rail or stile where it mounts.

Using The Swagger Series Pull In Cabinet Projects

Where This 160 mm Swagger Pull Works Best

The Swagger Series 6-5/16 inch (160 mm) center to center layout suits cabinet doors and drawers bored on the 160 mm standard, so it drops into new or existing runs using this spacing. The 6-3/4 inch overall length fits well on medium to large fronts, so one pull can bridge across standard kitchen drawers and most door rails. A 1-1/4 inch projection helps on deeper drawer faces and full-overlay doors, so hands clear surrounding edges while opening. The 5/8 inch width keeps the visual weight moderate, so hardware lines stay clean on framed or frameless cabinets. Zinc construction supports use on frequently operated doors, so the handle serves in kitchen, bath, or shop cabinetry that sees daily cycles.

Details That Support Consistent, Repeatable Results

The defined 6-5/16 inch center to center measurement gives a precise drilling target, so jigs or templates set for 160 mm consistently place this Swagger pull across a project. With a 6-3/4 inch length, measurement from handle end to bore location stays uniform, so installers can reference the ends visually during layout. The 1-1/4 inch projection standardizes stand-off from the door or drawer, so parallel rows of hardware align in depth as well as height. Width of 5/8 inch keeps the bearing surface the same on every pull, so users feel identical grip from cabinet to cabinet. Zinc material and black nickel finish repeat across each handle, so color and texture stay consistent along the entire run of hardware.

Common Questions About The Swagger Black Nickel Pull

Select This Swagger Pull For 160 mm Layouts

The Berenson Swagger Series 6-5/16 inch (160 mm) center to center black nickel pull brings a defined 160 mm bore spacing, a 6-3/4 inch overall length, and a 1-1/4 inch projection, so cabinet hardware lines stay consistent. Zinc construction and a black nickel finish tie the handle into projects built around metal decorative hardware in the same tone. For cabinet runs designed on the 160 mm standard, this Swagger pull from Wurth Baer Supply matches the drilling dimension while delivering a coordinated look across doors and drawers.