Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vested Interest pull 96mm describes this Berenson Vested Interest Series cabinet pull with a 3-3/4 inch (96 mm) center to center, which provides a defined hand grip that suits standard cabinet and drawer layouts. The Verona Bronze finish identifies a specific warm bronze tone that sets a consistent look across multiple fronts in the same run. The pull is made from zinc, giving a solid metal body that supports everyday opening and closing on frequently used doors and drawers. A length of 4-3/4 inches establishes how much handle spans across the face, helping plan spacing from door edges and adjacent fronts. The 1-3/16 inch projection sets how far the pull stands off the surface, creating clearance for fingers while keeping the handle close to the cabinet face. A 5/8 inch width defines the front profile, which affects both the visual line and how the pull feels in the hand.
This Berenson Vested Interest pull uses a 3-3/4 inch (96 mm) center to center measurement, so the mounting holes are positioned on that spacing for accurate drilling and template setup. The 4-3/4 inch overall length extends slightly beyond the hole spread, which affects how close the pull can sit to door edges and adjacent fronts. A projection of 1-3/16 inch defines the stand-off from the cabinet surface, shaping both hand clearance and how far the hardware presents from the face. The 5/8 inch width gives a narrow front profile, which influences layout when positioning multiple pulls on narrower rails or drawer fronts. An 8-32 screw size spec sets the thread standard at the attachment points, aligning the pull with a widely used cabinet fastener thread.
This Berenson Vested Interest Series pull with Verona Bronze finish is suited to cabinet and drawer fronts where a 3-3/4 inch (96 mm) center to center layout is desired, supporting consistent spacing across a run of doors. The 4-3/4 inch overall length fits many standard-width doors and drawers, providing a defined handle span without overwhelming smaller faces. Its 1-3/16 inch projection from the surface creates a functional gap behind the pull, giving room to grasp from the underside on both wall and base cabinets. The 5/8 inch width keeps the front profile relatively slim, which helps when hardware needs to sit comfortably on narrower stiles or rails. The zinc material construction provides a metal pull body, which supports everyday cabinet use in kitchen, bath, or shop storage settings where hardware is used frequently.
The 3-3/4 inch (96 mm) center to center drilling dimension matches a widely used cabinet pull spacing, which can simplify layout when following common boring jigs or existing hole patterns. The 4-3/4 inch length in relation to that center spacing leaves modest end overhangs, giving a balanced look and helping keep the ends away from adjacent edges on tight installations. The 1-3/16 inch projection determines how much the pull stands proud of the door, which influences both ergonomic grip and clearance for hands in confined spaces such as face frame reveals. A 5/8 inch width shapes how the pull feels to the fingers, offering a defined but not bulky contact surface that can be comfortable over repeated use. The zinc material basis means the pull is made from metal rather than a non-metal alternative, which contributes to a solid feel when opening heavier cabinet drawers or doors.
This pull has a 3-3/4 inch (96 mm) center to center measurement, which sets the spacing for the two mounting holes across cabinet or drawer fronts.
The pull length is 4-3/4 inches, so it extends beyond the 96 mm hole spacing and helps guide layout near cabinet edges and adjacent fronts.
This cabinet pull projects 1-3/16 inches from the cabinet surface, providing space behind the handle for fingers while keeping it close to the door face.
The 2328-10VB-P pull is made from zinc, giving a metal body that supports regular opening and closing on doors and drawers.
This Berenson cabinet pull has a Verona Bronze finish, which sets a specific bronze tone for coordinating with other hardware and fixtures.
This pull uses 8-32 screw size at the mounting points, matching a common cabinet hardware thread standard for fastening.
The Berenson Vested Interest Series 3-3/4 inch (96 mm) center to center Verona Bronze pull offers defined dimensions that support straightforward layout on cabinet and drawer fronts. With a 4-3/4 inch length, 1-3/16 inch projection, and 5/8 inch width, the handle provides a clear balance between grip space and visual scale on typical residential or commercial cabinetry. The zinc construction and Verona Bronze finish establish a metal pull with a specific bronze tone, which can align with other Berenson hardware and surrounding design elements. When a project calls for a 96 mm center to center metal pull in Verona Bronze, this 2328-10VB-P model from Wurth Baer Supply fits that defined specification.
Sold In: 1 Each
