
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Vested Interest knob gives you a 1-1/4 inch diameter pull point, providing a comfortable hand grip that works well on cabinet doors and drawers. The Vested Interest collection identity ties this knob into a coordinated decorative hardware style when matching other pieces on a job.
The knob is made from zinc, which delivers a solid metal feel that suits everyday cabinet use in kitchens, baths, or built-ins. Its Verona Bronze finish brings a darker metallic tone that supports traditional and transitional design schemes on wood or painted fronts.
A projection of 1-5/16 inch brings the knob out far enough from the face for easy grasping, which helps when opening heavier or full-overlay doors. The 11/16 inch base steps the diameter down at the contact point with the door or drawer, giving a visually balanced transition that suits standard face frames or slab fronts.
This knob uses an 8-32 thread size, aligning with the common cabinet knob screw pattern for straightforward installation on typical cabinet materials. With a listed width of 1-1/4 inch matching the diameter, the round profile keeps layout simple for installers planning consistent hardware spacing across multiple fronts.
This 1-1/4 inch diameter knob installs through a single 8-32 threaded hole, matching the standard pattern used on most cabinet doors and drawer fronts. That thread size aligns with typical shop drilling setups and jigs already built around 8-32 hardware.
The 1-5/16 inch projection controls how far the knob stands off the surface, which matters when planning clearances around adjacent doors, edge profiles, or nearby walls. With an 11/16 inch base, the bearing area at the surface remains compact, helping the knob sit properly on face-frame rails, narrow stiles, or drawer fronts without overwhelming tight proportions.
The listed 1-1/4 inch width matching the diameter confirms the round profile, simplifying layout because installers need only center the knob on the panel or rail. Using the 32 mm diameter measurement, metric-oriented shops can align drilling operations with existing European cabinet hardware spacing and documentation.
This Berenson Vested Interest Series knob, with its 1-1/4 inch diameter, suits cabinet doors and drawers where a mid-size pull point is desired. The size works well on standard kitchen and bath cabinets, giving enough surface for a secure grasp without overpowering narrow rails.
The Verona Bronze finish positions the knob for installations that call for a warm, darker metal accent against stained or painted woodwork. On projects using coordinated Vested Interest hardware, this knob supports visual continuity from base cabinets through wall units.
The zinc material body serves typical woodworking environments, from shop-built custom cabinetry to manufactured casework. Because the knob maintains a round profile with a consistent 1-1/4 inch width, installers can repeat centerline placements across multiple doors and drawer faces for a uniform appearance.
The 11/16 inch base transitions gently from the cabinet surface to the full diameter, which helps the knob sit comfortably even on narrower drawer fronts or small utility doors. That proportion keeps the hardware from crowding panel edges when used near corners or tight reveals.
The 1-5/16 inch projection establishes a predictable stand-off from the cabinet face, allowing installers to anticipate hand clearance and avoid interference with adjacent doors or trim. This consistent projection aids layout when multiple knobs line up across banks of drawers.
The 8-32 threaded mounting interface matches a common cabinet hardware standard, which simplifies replacement of existing knobs that already use 8-32 machine threads. Shops can work within familiar drill bit sizes and jigs when boring through doors and fronts.
At 1-1/4 inch, or 32 mm, diameter, the knob aligns with standard design expectations used by many cabinet lines, so planning clearances around appliance panels or tall pantry doors follows a known pattern. This helps reduce rework when knobs are specified late in a project.
The 11/16 inch base gives a defined bearing circle that seats squarely on flat wood or laminate faces, supporting a stable contact area at the mounting point. This controlled footprint assists in achieving a consistent visual ring where the knob meets the surface across an entire installation.
The knob has a 1-1/4 inch, or 32 mm, diameter with a matching 1-1/4 inch width, a 1-5/16 inch projection, and an 11/16 inch base, giving clear sizing for door and drawer layout.
The knob is made from zinc with a Verona Bronze finish, providing a metal construction and a darker bronze tone that coordinates with similar decorative hardware on cabinets.
The knob is designed for an 8-32 screw size, aligning with a common cabinet hardware thread standard and fitting typical predrilled 8-32 mounting holes in doors and drawer fronts.
The knob projects 1-5/16 inch from the cabinet surface, providing finger clearance for gripping while helping plan spacing near adjacent doors, trim, or walls during cabinet layouts.
The 1-1/4 inch diameter suits standard kitchen, bath, and built-in cabinetry, offering a mid-size pull point that feels comfortable on doors and drawers without overwhelming smaller fronts.
The 11/16 inch base creates a compact contact area at the cabinet face, helping the knob seat neatly on rails, stiles, and drawer fronts while maintaining a well-proportioned visual footprint.
The Berenson Vested Interest knob in Verona Bronze combines a 1-1/4 inch diameter, 1-5/16 inch projection, and 11/16 inch base with zinc construction for everyday cabinet use. When a project calls for this specific size, finish, and 8-32 mounting, this knob aligns with that requirement.