
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
bottom mount trash pullout gives a base cabinet a contained waste bin that slides out for access and closes with soft-close action. The Rev-A-Shelf waste pull-out in this configuration is a bottom mount unit with one 35 quart champagne bin and a champagne frame. It is built for kitchen cabinet trash pull-out use where you want the container hidden behind a cabinet door instead of left in the open. This champagne waste pull-out uses undermount waste pull-out slides with full-extension progressive roller travel and includes door mounting brackets. The frame has a powder coat finish, and the slide system is rated for 90 lb according to the verified product data. Lids are sold separately.
Key specs to confirm: This Rev-A-Shelf waste pull-out is described as an 11 inch champagne bottom mount waste pullout with one 35 quart bin. The product data also references 10.87, which buyers should confirm against the current technical documentation for the exact cabinet opening or product width detail before ordering. Verify your base cabinet interior width, interior depth, interior height, door size, and whether your cabinet construction supports a bottom mount installation with an undermount slide system. The slides are verified as full-extension progressive roller slides with a 90 lb rating and soft-close. Any unlisted dimensional tolerances, compliance details, or installation clearances should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf bottom mount waste pull-out frame in champagne, one 35 quart champagne bin, undermount full-extension progressive roller slides with soft-close, and door mounting brackets. Lids are sold separately.
What to verify before ordering: Confirm cabinet opening size, usable interior floor space, door attachment method, clearance for full pull-out travel, and whether a separate lid is needed. Follow manufacturer installation guidance and local building requirements where applicable.
A soft-close trash pullout like this one fits projects where the buyer wants waste storage inside a base cabinet and wants the cabinet door to open with the pull-out assembly. For many kitchen remodels, the main pain point is exposed trash cans that take up floor space or interrupt traffic flow. A cabinet trash pull-out addresses that by moving the bin into the cabinet and bringing it forward only when needed.
This Rev-A-Shelf waste pull-out is built as a bottom mount trash pullout, so installers should think first about cabinet floor condition and usable interior dimensions. The verified package includes one 35 quart bin, which makes it a practical choice when a single-bin layout is enough for the cabinet plan. The included door mounting brackets matter for buyers who want the door mount trash pull-out style where the door and frame move together. That can make day-to-day use simpler because the user pulls one handle and the waste container comes out with the door.
The undermount waste pull-out slide setup also matters in real use. Because the slides are full extension progressive roller slides, the bin can move forward for access rather than stopping short inside the cabinet. Soft-close action helps in busy kitchens where the pull-out gets used repeatedly through the day. The verified 90 lb slide rating gives buyers a concrete load figure for the assembly, but if they need guidance on how that applies to their exact installation, they should confirm with the manufacturer documentation.
This 35 quart trash pull-out can also suit replacement work when an older pull-out frame needs to be updated to a champagne finish or when a matching Rev-A-Shelf cabinet accessory line is being used across the project. Before ordering, buyers should confirm the exact opening width and any needed clearance around hinges, face frames, and the cabinet floor area. If a lid is required for odor control or sorting, note that lids are sold separately.
When buyers compare pull-out waste systems, the main differences usually come down to mounting style, slide travel, included hardware, finish, and whether the bin is included. This Rev-A-Shelf unit gives a clear set of verified details that help narrow that decision. It is a bottom mount trash pullout, not a general loose bin, so it is intended for cabinet installation. It includes one 35 quart bin, which removes uncertainty about the main container. It also includes door mounting brackets, which is useful for projects that need the cabinet door tied to the pull-out frame.
Another point buyers often compare is slide behavior. This product uses undermount full-extension progressive roller slides with soft-close. In practical terms, that means the waste pull-out is designed to extend for access and return in a controlled way. Buyers who are reviewing multiple cabinet trash pull-out options should also look at the frame finish and visible bin finish. Here, both are identified as champagne, and the frame has a powder coat finish.
For installers and serious DIY buyers, reliability often comes from choosing a product with clearly stated included parts and a known brand. Rev-A-Shelf is the verified brand on this waste pull-out, and the listing identifies the product class, included bin size, slide type, and the fact that lids are separate. That makes planning easier than buying a pull-out where the included components are unclear. The remaining purchase step is fit confirmation: verify cabinet dimensions, confirm the meaning of the listed 11 inch and 10.87 measurements in current documentation, and make sure the cabinet can accept a bottom mount installation with the required travel space.
This Rev-A-Shelf waste pull-out fits only cabinets with the needed interior space and bottom mount support. Confirm opening width, depth, height, and door clearance before ordering.
This cabinet trash pull-out includes one 35 quart champagne bin with the pull-out frame and slide system.
This soft-close trash pullout does not include a lid. The verified product data states that lids are sold separately.
This bottom mount trash pullout is installed at the cabinet bottom and uses undermount slides. Follow manufacturer installation guidance and local building requirements where applicable.
This door mount trash pull-out includes door mounting brackets, which help connect the cabinet door to the pull-out assembly.
This undermount waste pull-out uses undermount full-extension progressive roller slides with soft-close.
This Rev-A-Shelf waste pull-out lists a 90 lb rated slide system in the verified product data.
This kitchen cabinet trash pull-out requires checks for interior width, depth, height, cabinet floor space, door swing, and clearance for full pull-out travel.
This full extension trash pull-out has a champagne frame and champagne bin, and the frame uses a powder coat finish.
cabinet trash pull-out selection is easier when the fit details are clear. This Rev-A-Shelf unit gives you a bottom mount frame, one 35 quart champagne bin, soft-close undermount full-extension slides, and included door mounting brackets. Before purchase, confirm your cabinet opening, usable interior floor area, and the exact dimensional meaning of the listed 11 inch and 10.87 references in current technical documentation. If your layout needs a lid, remember that it is sold separately.
Sold In: 1 Each