Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Conturo Edge Bander Magazine is an optional reel for the Festool Conturo Edge Bander that holds and feeds long strips of edge banding, so you can handle continuous runs without juggling loose material at the bench. By using a dedicated magazine designed for the Conturo Edge Bander, you keep banding organized right at the tool, which supports steadier feeding and less time spent untangling or repositioning strips during a job. The magazine is specified for use with edge banding up to 26 feet, so it matches typical cabinet and furniture runs where multiple parts share the same material, helping you work part after part without stopping to reset. With this magazine in place on the Conturo Edge Bander, the banding follows the tool naturally, which supports more consistent application along edges and helps maintain a smooth workflow from piece to piece.
The magazine attaches to the Conturo Edge Bander without the need for tools, so you can mount or remove it quickly when job requirements change. Because no tools are required, there is no separate setup kit to handle and no extra steps before you start applying banding. The reel is designed to work with edge banding up to 2mm thick and up to 1-3/4 inches (45mm) tall, so once it is attached you thread the appropriate banding size and then operate the Conturo Edge Bander as a single integrated unit. With up to 26 feet (8m) of capacity on the magazine, you can prepare one long strip for a series of edges and move from piece to piece while the banding follows the tool.
This Conturo Edge Bander Magazine is designed as an optional magazine for the Festool Conturo Edge Bander, so its role is to sit on the tool and manage long strips of edge banding during operation. Because it is capable of holding up to 26 feet (8m) of banding, it suits projects where multiple cabinet parts, doors, or shelves share the same banding and are processed in sequence. The specification for edge banding up to 2mm thick means it works within a defined material range, aligning with common thin veneer and similar banding materials used in typical woodworking and cabinet shops. The ability to handle banding up to 1-3/4 inches (45mm) tall allows it to support edges on parts such as thicker shelves or workpieces where a taller edge band is required, keeping the strip aligned as the Conturo Edge Bander moves along the work.
The edge banding capacity of up to 26 feet (8m) on this reel lets you load a single long strip, which reduces joints between shorter offcuts and supports a more uniform appearance along edges handled in one sequence. By specifying support for banding up to 2mm thick, the magazine keeps the material range consistent with what the Conturo Edge Bander is intended to process, so the banding feeds smoothly without leaving the range the reel is built to guide. The 1-3/4 inch (45mm) maximum banding height helps the strip track properly on taller edges, which can reduce twisting or misalignment that might otherwise need correction later. Since the magazine attaches to the Conturo Edge Bander without the need for tools, changing from shorter runs to longer, reel-fed runs becomes a quick step, which supports better time use across a production day. Working with an optional magazine designed for this machine also keeps the banding positioned close to the feed path, which supports steadier handling across multiple parts.
The Conturo Edge Bander Magazine is an optional reel for the Festool Conturo Edge Bander that holds and feeds long strips of edge banding, helping manage continuous runs on cabinet and woodworking projects.
The Conturo Edge Bander Magazine is capable of holding up to 26 feet (8m) of edge banding, so one setup can serve multiple edges or parts using the same continuous strip.
The Conturo Edge Bander Magazine is specified for edge banding up to 2mm thick, which covers many common banding materials used with the Festool Conturo Edge Bander.
The Conturo Edge Bander Magazine supports edge banding up to 1-3/4 inches (45mm) tall, helping keep taller strips stable on the reel as they feed into the tool.
The Conturo Edge Bander Magazine attaches to the Conturo Edge Bander without the need for tools, allowing quick installation or removal when setting up for different edge banding runs.
The Conturo Edge Bander Magazine has manufacturer part number 499479, which identifies this specific Festool edge banding reel for ordering and reference.
The Conturo Edge Bander Magazine from Festool, part number 499479, is specified as an optional magazine for the Conturo Edge Bander, so it is built to work directly with that machine during normal edge banding tasks. With capacity for up to 26 feet (8m) of edge banding up to 2mm thick and 1-3/4 inches (45mm) tall, it supports longer runs and a defined range of banding sizes on cabinet and woodworking projects. The attachment method that does not require tools lets you put the reel into service quickly whenever a job calls for continuous banding. For work that benefits from steady feeding of long strips on the Conturo Edge Bander, this magazine provides the dedicated reel function for that role.
Sold In: 1 Each