Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tresco Stax Starter Kit Black gives you a defined LED linear lighting solution using 5000K light for bright, neutral illumination where accurate visibility matters. Each LED light module runs at 1.5W, so you get controlled light output that manages power use during continuous operation. The 25 degree beam spread focuses light into a tighter work area, which helps concentrate illumination on the actual task zone instead of wasting light outside the working surface. A lamp life of 30,000 hours supports long service in fixed installations, which reduces the frequency of lighting changeouts in fitted cabinetry or casework. The system design allows 360 degree horizontal and 60 degree vertical movement, so the light modules can be aimed to follow project-specific sight lines or highlight surfaces. Stackable performance up to 18 inches lets the installer build a defined run of modules to cover a taller or wider working area in a consistent way.
The Tresco Stax Starter Kit Black uses LED linear lighting geometry so it fits naturally along straight cabinet runs and similar surfaces where linear fixtures align with edges. The 360 degree horizontal movement specification allows each LED light module to rotate fully around its mounting axis, which lets you swing the light toward the working face or into the cabinet interior after it is set in place. With 60 degrees of vertical movement, the module can tilt up or down from its mounting point to direct the 25 degree beam spread exactly where the illumination is needed. Because each module is rated at 1.5W, installers can plan how many modules to position within an 18 inch stack and still understand the total load for the lighting zone. The 5000K output works well in task-focused layouts where neutral light helps maintain visibility at the point of use.
The Tresco Stax Starter Kit Black, identified as LED linear lighting by Tresco Lighting, is built for applications that need a controlled beam across a defined run. The 25 degree beam spread focuses output into a tight cone, which suits installations where the goal is to highlight a working strip or visual feature instead of providing broad ambient light. Because each LED light module draws 1.5W, the system supports projects that require multiple modules in close succession without creating an oversized electrical load. The stackable up to 18 inches capability defines how tall or long a continuous Stax assembly can be, so casework, display sections, or similar structures can be lit consistently from one end of the assembly to the other. The 5000K designation also aligns with work zones or displays that benefit from bright, neutral light.
The Stax starter kit specification of 360 degree horizontal and 60 degree vertical movement means each LED module can be adjusted after installation, which helps bring the 25 degree beam spread directly onto the intended surface even when mounting locations are fixed by the cabinet or structure. This adjustability lets installers compensate for field conditions such as varying face depths while still delivering consistent light coverage along an 18 inch stacked section. The 30,000 hour lamp life rating supports repeatable long-term performance since the LEDs are designed to remain in service for extended periods before replacement, which is valuable on built-ins where access to the lighting is limited after finish work. Using 5000K light across all modules keeps the color of illumination consistent along the entire Stax run, reducing visual breaks between segments. Together, these defined characteristics support predictable lighting results from one installation to the next.
The Tresco Stax Starter Kit Black is LED linear lighting from Tresco Lighting, so it is suited to straight runs where a defined line of 5000K light is needed along cabinets or similar structures.
Each Tresco Stax LED light module is rated at 1.5W per module, which helps calculate total load when planning how many modules to use in an 18 inch stack.
The 25 degree beam spread concentrates light into a narrow cone, directing illumination onto a focused work or display area rather than broadly across the surrounding space.
The 360 degree horizontal and 60 degree vertical movements allow the modules to be aimed after mounting, helping align the beam to cabinets, shelves, or work surfaces.
The 30,000 hour lamp life indicates the LED modules are designed for long service, which supports fixed installations where frequent lighting replacement would disrupt finished work.
Stackable up to 18 inches defines the maximum combined run of modules, helping plan continuous lighting coverage along cabinets or displays within the system limits.
The Tresco Stax Starter Kit Black from Tresco Lighting offers 5000K LED linear lighting with 1.5W per LED light module, 25 degree beam spread, and 30,000 hour lamp life. Its 360 degree horizontal and 60 degree vertical movement, along with stackable up to 18 inches capability, provide defined aiming and layout parameters for task or display lighting. For projects calling for bright, neutral, focused illumination along a controlled run, these specifications help align the starter kit with cabinet, casework, or display applications that rely on predictable, adjustable light.
Sold In: 1 Each
