Tresco Stax Starter Kit Nickel Finish - Tresco Lighting L-STX-SKIT-WNI-1

Tresco Stax Starter Kit Nickel For Focused LED Lighting

Tresco Stax Starter Kit Nickel gives you a 3000K LED linear lighting solution rated at 1.5W per LED light module, so you get efficient task lighting that helps control power loads on cabinet, display, or work-area projects. The 25 degree beam spread concentrates light where it is aimed, which supports clean, defined illumination on counters, shelves, or work surfaces without spilling too far outside the target zone. Each LED light module is rated for a 30,000 hour lamp life, which reduces the frequency of changeouts on long-running installations. The 3000K color temperature provides a warm appearance that works well for residential or commercial millwork needing inviting, comfortable light levels. The nickel finish coordinates with common contemporary hardware finishes, helping the lighting track blend into visible cabinet or fixture components.

Key LED Module Details That Support Your Projects

• Each LED light module operates at 1.5W, which helps limit electrical load when several modules are used on a single run and supports efficient system design in tight power budgets.
• The 25 degree beam spread focuses the output into a narrower cone, which helps you highlight specific areas or products on shelving while reducing light wash onto adjacent surfaces.
• Lamp life of 30,000 hours means the LED light modules are engineered for long service, which reduces time spent accessing and changing fixtures installed in cabinetry or built-ins.
• Stackable design up to 18 inches lets you combine modules along a run, which gives flexibility to extend illuminated length on longer cabinets, displays, or worktops.
• 360 degree horizontal and 60 degree vertical movement provide broad aiming adjustment, which helps fine-tune light onto working areas or display items after the fixtures are mounted.

LED Linear Lighting Adjustability For Clean Aiming

The 360 degree horizontal movement allows each LED module in the STAX STARTER KIT 3000K NICKEL to rotate fully side to side, so you can turn the beam along runs of cabinetry or across shelving without relocating the fixture base. The 60 degree vertical movement lets you tilt the module up or down, which is useful for dialing in beam angle on backsplashes, counters, or display panels once the installation location is fixed. Working with a 25 degree beam spread, this adjustability lets you shape the light on the finished surface, helping reduce glare on glossy materials and improving visibility where hands and tools actually work.

How This LED Linear Lighting Kit Fits Real Jobs

Where The L-STX-SKIT-WNI-1 Starter Kit Works Best

The Tresco Lighting LED linear lighting design of the L-STX-SKIT-WNI-1 starter kit suits cabinet, display, and millwork projects that benefit from directional task or accent lighting. The 3000K LED linear lighting output creates a warm tone that supports use in residential kitchens, hospitality casework, or retail fixtures where comfortable appearance matters alongside visibility. Stackable modules up to 18 inches let you match the illuminated run to shorter or medium-length sections, which fits upper cabinets, floating shelves, or integrated display niches. The nickel finish helps the modules coordinate with brushed nickel or similar decorative hardware, so exposed segments can sit near hinges, pulls, or trim without visually clashing in the finished installation.

Why The Adjustable Stax Design Supports Accurate Results

The Tresco Stax Starter Kit Nickel combines 360 degree horizontal and 60 degree vertical movement with a 25 degree beam spread, giving installers a focused yet steerable light that can be aimed precisely after mounting. This reduces the need to reposition fixtures if layout conditions shift during cabinet or display construction, because you can pivot or tilt the LED light modules to recover the intended highlight area. The 1.5W per LED light module power rating lets you add multiple modules in a system while managing total wattage, which is useful when several sections of a project require consistent illumination from the same circuit. With a 30,000 hour lamp life, the kit supports applications where access for future service is limited, allowing the installed lighting to remain in place for extended periods under typical usage. The 3 year warranty from Tresco Lighting backs this performance expectation, giving additional assurance when specifying the starter kit into new builds or refresh projects.

Common Questions About The Tresco Stax Starter Kit

Select The Right Stax Starter Kit For Your Project

The Tresco Stax Starter Kit Nickel delivers 3000K LED linear lighting at 1.5W per LED light module with a 25 degree beam spread, adjustable 360 degree horizontal and 60 degree vertical movement, and stackable construction up to 18 inches. The 30,000 hour lamp life and 3 year warranty give this L-STX-SKIT-WNI-1 starter kit a defined performance profile suited to cabinets, displays, and millwork where warm, focused, and aimable lighting is required. Choose this configuration when your project benefits from directional LED modules in a nickel finish that coordinate with contemporary hardware and trim.