Knape and Vogt SBM 11-3/8" White Bottom Mount Waste Pullout with 2-27 Quart White Bins Standard, SBM12-2-27WH

Knape And Vogt SBM12-2-27WH Bottom Mount Waste Pullout

Knape and Vogt SBM12-2-27WH is a bottom mount trash pullout that uses KV heavy-duty ball bearing precision slides to move smoothly under load, so the waste unit tracks straight in and out of the cabinet for consistent everyday use. The unit is built as a pre-assembled system, so the slides, frame, and bin supports arrive already connected for straightforward placement in the cabinet. It uses an updated wire management system that holds the bins securely in place, which keeps the containers seated in the frame as the pullout opens and closes. The trash pullout is part of Knape and Vogt bottom mount trash pullouts, giving installers a familiar layout when used alongside similar KV waste systems. This model is identified by manufacturer part number SBM12-2-27WH, which helps match it to project specs and replacement schedules.

Key Details That Support Cabinet Waste Use

• KV heavy-duty ball bearing precision slides support the pullout action, so the waste unit opens and closes smoothly along a fixed path inside the cabinet.
• An updated wire management system holds bins securely in place, which keeps the containers from shifting on the frame during repeated opening and closing.
• The unit is pre-assembled with heavy-duty mounting straps, so the main structure arrives ready to position as a single assembly in the cabinet.
• Installation uses only 4 screws through the heavy-duty mounting straps, which simplifies fastening the pullout base to the cabinet floor.
• A clip-on handle is part of every unit, giving a defined grip point for pulling the waste system out from behind the cabinet door.
• The trash pullout is designed as a bottom mount trash pullout, so it anchors to the cabinet floor and operates from that stable base.

Bottom Mount Trash Pullout Installation Workflow

This bottom mount trash pullout mounts to the cabinet floor using heavy-duty mounting straps, so positioning centers on aligning the strapped base where the slides can travel freely. The pre-assembled structure keeps the slides, frame, and straps connected during setting, which lets the installer place the entire unit as one piece. Fastening relies on only 4 screws driven through the mounting straps, streamlining the step where the frame is locked to the cabinet. Once secured, the KV heavy-duty ball bearing precision slides guide the pullout, so the waste unit follows the slide geometry rather than cabinet side alignment work.

Where And Why This Waste Pullout Works

Cabinet Bottom Mount Waste System In Use

This cabinet bottom mount waste system is built as a bottom mount trash pullout, so it is intended for cabinets where anchoring to the floor is preferred over side mounting. The two 27 quart white bins give a double-container layout, so a project can assign one bin for trash and the other for a different waste stream when desired. The white bins match the white bottom mount waste pullout structure, so the components present a consistent look when the unit is extended from the cabinet. The updated wire management system holds the bins securely in place inside the frame, which helps the containers stay seated when the pullout reaches full extension. Using KV heavy-duty ball bearing precision slides, the system supports repeated extension and retraction, so the bins can be accessed regularly without manually repositioning the frame.

Details That Support Repeatable Slide Performance

The KV heavy-duty ball bearing precision slides are central to this trash pullout, because they carry the moving frame on ball bearings that control the in-and-out travel. That construction lets the waste unit move in a straight, predictable path, so the front of the pullout returns to the same position after every cycle. The pre-assembled unit design means the slides are already aligned on the frame, which removes on-site slide assembly steps and supports consistent operation from one cabinet to the next. Heavy-duty mounting straps form the connection between frame and cabinet floor, so the load from the bins transfers into a fixed base instead of relying on side panels. The clip-on handle provides a grip point on the front of the frame, which directs pulling force through the slides for smoother extension than grabbing a bin edge. Optional lids are available for this system, giving projects the ability to cover the bins when a closed top is preferred inside the cabinet. An optional door-mount bracket is also available, which allows projects to connect the cabinet door directly to the pullout when that style is specified.

Common Questions About This KV Waste Pullout

Selecting This Bottom Mount Waste Pullout

The Knape and Vogt SBM12-2-27WH bottom mount trash pullout pairs KV heavy-duty ball bearing precision slides with two 27 quart white bins, so it suits cabinet projects needing a double-bin floor-mounted waste system. The pre-assembled frame, heavy-duty mounting straps, and 4-screw installation support straightforward setup when time on site is tight. Optional lids and an optional door-mount bracket extend how the same base unit can be configured across different kitchen or bath layouts. For projects that standardize on Knape and Vogt bottom mount trash pullouts, this model offers a consistent waste layout tied to manufacturer part SBM12-2-27WH.