Pockit 120M 4W Cool White Puck Light Use

Pockit 120M 4W cool white puck light describes a 120V, 4W LED puck from Tresco Lighting that delivers 270 lumens, so installers get a compact fixture that still provides meaningful task or accent light in cabinets, displays, or work areas. The 5000K cool white color supports applications that benefit from a brighter, neutral appearance, helping details stand out on light surfaces or hardware. The all-metal construction is commercial grade, which aids heat sinking and supports long-term performance in demanding shop or kitchen environments. The puck is part of Tresco Lighting's LED puck family, so it fits typical cabinet and millwork lighting layouts. A 2-3/4 inch overall diameter keeps the fixture unobtrusive while still covering a 2-3/8 inch bore hole, giving a clean finished look. At 7/8 inch high with the surface mount ring, the profile stays low, which matters when routing wiring or maintaining clearance inside shallow cabinets.

Key LED Puck Details For Cabinet Projects

• The 270 lumens output from this puck light provides usable light for undershelf or cabinet applications, helping illuminate work surfaces or interior spaces without relying on larger fixtures.
• The 5000K cool white tone delivers a bright, neutral appearance that helps color contrast and detail visibility in shops, display cases, or modern kitchens where crisp light is preferred.
• The commercial grade all-metal construction supports optimal heat sinking, which is important for maintaining LED performance and service life in continuous or frequent-use installations.
• The 30,000 hours of lamp life rating means the puck is designed for long-term use, reducing lamp replacement work on finished cabinetry or built-in installations.
• The 100 degree beam spread distributes light over a wide area from a small fixture, helping reduce dark spots and allowing wider spacing between pucks across a run.
• The size of 2-3/4 inch overall diameter allows the puck to cover a 2-3/8 inch bore hole, giving a clean edge and simplifying layout when boring holes during fabrication.

Mounting And Power Details For Installers

This Tresco LED puck light operates directly on 120V, so no external power supply or transformer is required, which simplifies wiring in residential or commercial millwork projects. Each puck has a built-in dimmable driver, allowing dimming to 50 percent using standard LED wall dimmers and supporting basic light level control without specialty controls. The light can be surfaced or recessed mounted, so the same model handles both shallow undercabinet mounting and flush installations in a 2-3/8 inch bore. A surface mount ring is part of the solution, giving flexibility when a recess is not available. The 7/8 inch height with the surface ring keeps the assembly compact on surface applications, useful in tight spaces under shelves or inside cases.

How This LED Puck Fits Real Projects

Using The 2-3/4 Inch Puck In Cabinets

This puck light measures 2-3/4 inch in overall diameter and is designed for a 2-3/8 inch bore hole, so it suits common cabinet and shelf drilling operations where a clean, round recess is needed. The 100 degree beam spread lets a small number of pucks cover a wider interior or counter span, which is helpful on long upper cabinets or display runs. With 270 lumens per puck, installers can plan light levels per cabinet bay or section, rather than oversizing fixtures. The 7/8 inch height with the surface mount ring keeps undercabinet clearance high while still providing direct light on counters. The cool white 5000K output pairs well with contemporary cabinet finishes and hardware where a crisp appearance is desired.

Details That Support Consistent Lighting Results

This linkable 120V LED puck light can be linked up to 15 fixtures, enabling continuous runs along a bank of cabinets while relying on a single feed point, which simplifies layout. Because each puck has a built-in dimmable driver and is dimmable to 50 percent by standard LED wall dimmers, installers can tune light levels after installation while using familiar control devices. Operating directly on 120V without a separate power supply or transformer reduces component count in the field and helps streamline wiring in tight valance or cabinet cavities. The commercial grade all-metal construction enhances heat sinking, supporting its 30,000 hours of lamp life and providing stability in high-use or commercial cabinetry. A required starter cord brings power to the lights, establishing a defined connection point for the run. The ability to surface or recess mount gives flexibility to address different cabinet constructions with one part number.

Common Questions About This Tresco Puck Light

Selecting This Puck For Cabinet Lighting Runs

The Pockit 120M 4W cool white puck light from Tresco Lighting combines 120V input, a built-in dimmable driver, and 270 lumens output, making it a practical choice for cabinet, display, or task runs. The 2-3/4 inch diameter, 2-3/8 inch bore requirement, and 7/8 inch surface-mounted height support both surface and recessed mounting approaches. Linkable operation up to 15 fixtures and a 30,000 hours lamp life rating help deliver consistent results across larger projects. For projects needing cool 5000K light in a compact, all-metal puck, this model aligns closely with typical trade demands.