Pockit 120-M LED Puck Lights 4 Watt, 120V, Linkable - Tresco Lighting L-MPOC-4W-120L-WBL

Pockit 120-M LED Puck Lights For Task Lighting

Pockit 120-M LED puck lights deliver 4 watt output at 120V, providing a focused LED source that suits cabinet, display, or task areas where a compact fixture keeps the layout clean. The light produces 270 lumens with a 100 degree beam spread, so each puck covers a broad working area without harsh hot spots. A 3000K color temperature creates a warm-toned light that fits typical residential and commercial millwork environments. Each puck operates at 120V with no power supply or transformer required, simplifying layout because the fixture connects directly within a 120V run. The puck design allows surface or recessed mounting, giving flexibility when working with existing cabinets or new casework. The all-metal construction functions as a heat sink, supporting consistent LED performance over time. Rated lamp life of 30,000 hours reduces fixture changeout frequency in regularly used areas.

Key Pockit 120-M LED Puck Light Details

• The 4 watt LED light output focuses illumination where needed while managing energy use on multi-puck runs, which helps when designing longer rows up to the linkable limit.
• The 120V operation without a separate power supply streamlines planning because wiring stays within standard line-voltage practices on a lighting circuit.
• The 270 lumens output with a 100 degree beam spread helps distribute light evenly across shelves or counters, reducing dark spots between adjacent pucks.
• The 3000K light color provides a warm appearance that tends to flatter wood tones and laminates, supporting consistent visual results across a project.
• The commercial grade all-metal construction provides effective heat sinking for the LED, which supports long-term performance in continuous or frequent-use installations.
• The rated 30,000 hours of lamp life lowers maintenance frequency, which is useful on built-in cabinetry where fixture access may be limited.
• The bore hole size of 2-3/8 inches and overall diameter of 2-3/4 inches define the cutout and layout spacing, supporting accurate drilling and alignment.
• The 7/8 inch height with surface mount ring keeps the profile compact, which helps when mounting under shelves or in shallow enclosures.

Mounting And Wiring The 120V Puck Light

The Pockit 120-M LED puck lights are designed for surface or recessed mounting, so installers can match the method to cabinet construction or existing cutouts. The bore hole requirement of 2-3/8 inches provides a clear drilling dimension for recessed applications, which helps maintain a snug fit without overcutting. With an overall diameter of 2-3/4 inches, the trim neatly covers the bore, supporting a finished appearance on visible undersides. The 7/8 inch height with the surface mount ring keeps the fixture low-profile, which is useful under shallow shelves. Each puck has a built-in dimmable driver, allowing direct connection to compatible standard LED wall dimmers for step-down control to 50 percent light output. The 120V rating and internal driver remove the need for an external transformer, simplifying wiring runs. A required starter cord gets power to the lights and establishes the starting point of the linked run.

Using Pockit 120-M Puck Lights In Linked Runs

Where Pockit 120-M LED Puck Lights Fit Best

Pockit 120-M LED puck lights operate at 120V with 4 watt draw per fixture, which suits cabinet, display, or counter runs where line voltage is already present. The ability to surface or recess mount means the same puck adapts to different casework styles, whether working with face-frame cabinets, frameless boxes, or display shelving. The specified bore hole of 2-3/8 inches guides drilling for recessed layouts, helping produce consistent cutouts from one cabinet to the next. When surface mounting, the 7/8 inch height with the ring keeps the fixture tight to the substrate, which is useful below shelves where clearance is limited. The 270 lumens output and 100 degree beam spread work well for evenly washing smaller zones such as under-cabinet work areas or niche displays. A 3000K color temperature supports warm visual tone on wood veneers, painted finishes, and laminate worktops.

Why Linkable And Dimmable Details Matter On Site

The Pockit 120-M LED puck lights are linkable up to 15 fixtures, which allows a single run to cover longer cabinet sections while maintaining uniform light characteristics across all pucks. Linking fixtures within this limit helps simplify layout, because the same 4 watt, 270 lumen, 100 degree beam specification repeats along the row. Each puck has a built-in dimmable driver, and the system is dimmable to 50 percent by standard LED wall dimmers, letting users tune light level once the space is in use. This dimming range helps balance brightness between task zones and adjacent areas without changing fixtures. Operating directly on 120V eliminates separate power supplies, reducing component count within the installation space. The all-metal construction acts as a heat sink for the LED, supporting consistent performance during extended operation. The required starter cord supplies power to the linked chain, establishing a clear feed point for the run layout.

Common Questions About This 120V Puck Light

Selecting Pockit 120-M Pucks For Your Project

The Pockit 120-M LED puck lights combine 4 watt, 120V operation, 270 lumens output, and 3000K color into a compact housing suited for millwork lighting. Linkable runs up to 15 fixtures, with each puck dimmable to 50 percent, support flexible light levels along cabinets or shelves. The option to surface or recess mount lets one part number handle different cabinet styles using the defined 2-3/8 inch bore hole and 2-3/4 inch overall diameter. For projects needing warm, even illumination with 30,000 hours of lamp life, this Tresco Lighting model L-MPOC-4W-120L-WBL provides a focused solution.