Pockit 120M LED 4W Warm White Non-Linkable Puck Light, 2.75", White

Pockit 120M LED 4W Warm White Non-Linkable Puck Light Use

Pockit 120M LED 4W Warm White Non-Linkable Puck Light delivers 270 lumens, giving focused task lighting that helps illuminate work areas or cabinet interiors clearly. The warm white 3000K color provides comfortable light that suits kitchens, offices, or display spaces without appearing harsh. The 100 degree beam spread throws a wide, even pool of light, which helps reduce hotspots and shadows on countertops or shelves. The 2-3/4 inch overall diameter keeps the light compact, so it fits cleanly into cabinet layouts or tight soffits. The 7/8 inch height with surface mount ring keeps the fixture low profile, supporting clean lines when mounted under cabinets. Tresco Lighting engineering pairs these performance details so installers can plan predictable, uniform lighting runs.

LED Puck Light Details That Support Jobs

• The 270 lumens output provides bright task illumination, which helps users clearly see inside cabinets or on counters during detailed work.
• The 30,000 hours of lamp life supports long service intervals, which reduces time spent returning to jobs for lamp changes.
• The 100 degree beam spread creates a broad wash of light, helping minimize scalloping on vertical surfaces and improving visual consistency.
• The 2-3/4 inch overall diameter and 2-3/8 inch bore hole sizing allow precise layout, which simplifies drilling and cutting operations on site.
• The ability to dim to 50% by standard LED wall dimmers lets installers tune light levels, which helps match ambient lighting and reduce glare.
• The commercial grade all-metal construction provides optimal heat sinking, supporting stable light output during extended operation.

Installation, Mounting, And Power Details

This Tresco LED puck light operates on 120V with no power supply or transformer required, so it wires directly into standard line-voltage runs and simplifies planning for drivers. Each puck has a built-in dimmable driver, which removes separate driver placement from the layout and frees space in cabinets or valances. The light can be surface or recessed mounted, giving flexibility for retrofits or new millwork depending on existing cutouts. The surface mount ring defines the 7/8 inch height, helping maintain a consistent reveal under cabinets. The 2-3/8 inch bore hole requirement provides a clear drilling target, supporting accurate placement in shop or on-site fabrication. A starter cord must be purchased to get power to the lights, which organizes the connection point back to line voltage.

Where This Pockit 120M LED Puck Works Best

Applications For Cabinets, Counters, And Displays

The warm white 3000K output suits residential kitchens, where comfortable color helps blend with common lamp types and finishes. At 270 lumens with a 100 degree beam spread, each fixture supports use as a task light over counters or work surfaces. The compact 2-3/4 inch diameter fits well in cabinet bottoms, shelves, and display cases, keeping the hardware visually discreet. Surface mounting with the ring works for finished cabinet bottoms where cutting recesses is not desired. Recessed mounting with the 2-3/8 inch bore hole suits new shop-built cabinets, allowing a flush appearance that emphasizes the millwork rather than the fixture. Linkable up to 15 fixtures, this light supports continuous runs across longer cabinet banks or display rows while maintaining consistent light levels. The commercial grade all-metal construction pairs well with commercial or institutional millwork where robust housings are preferred. Tresco Lighting branding gives installers a recognizable line-voltage puck solution for repeated projects.

Details That Support Repeatable Installation Results

The 120V operation with no separate power supply or transformer required streamlines planning on multi-unit projects, because each run ties directly into standard electrical circuits. The built-in dimmable driver in each puck centralizes control within the fixture, helping maintain consistent dimming behavior across linked lights. Dimming to 50% by standard LED wall dimmers lets installers standardize controls with other 120V LED loads on the same job. The 2-3/4 inch overall diameter and 2-3/8 inch bore hole give clear dimensions for jigs, so shops can repeatedly drill panels for uniform layouts. Being linkable up to 15 fixtures allows predictable wiring schemes along long cabinet lines without additional drivers, which helps reduce wiring complexity. The option for surface or recessed mounting gives flexibility when conditions on site differ from drawings, supporting adjustments without changing fixture type. The commercial grade all-metal body provides optimal heat sinking, which supports consistent performance when fixtures run for many hours in retail or kitchen environments.

Common Questions About This Tresco LED Puck Light

Select This Puck Light For Line-Voltage Cabinet Runs

This Tresco Lighting Pockit 120M LED 4W warm white puck light combines 120V operation, a built-in dimmable driver, and commercial grade all-metal construction to support demanding cabinet and display lighting projects. The ability to surface or recess mount, along with defined dimensions of 2-3/4 inch overall diameter and 2-3/8 inch bore hole, helps streamline layout and fabrication. With 270 lumens at 3000K and linkable capacity up to 15 fixtures, this puck fits well into continuous runs where consistent, comfortable task lighting is required. Select this model when projects call for compact line-voltage LED puck lighting with straightforward dimming and long 30,000-hour lamp life.